Volume is indexed by Thomson Reuters BCI (WoS). This work reflects the wide and fascinating range of fields to which positrons have made important contributions. This covers, in particular, the development of low-energy (eV-keV) beams of essentially mono-energetic positrons, in the late 1960s, which opened the door to an even wider range of fundamental and technological studies: from surface physics to polymer films. In her introduction Professor Ganguly offers some background knowledge on the extent to which positrons have influenced and contributed to work in numerous fields.

The lifetime of a positron inside a solid is normally less than a fraction of nanosecond. This is a very short time on a human scale, but is long enough to enable the positron to visit an extended region of the material, and to sense the atomic and electronic structure of the environment. Thus, we can inject a positron in a sample to draw from it some signal giving us information on the microscopic properties of the material. This idea has been successfully developed in a number of positron-based techniques of physical analysis, with resolution in energy, momentum, or position. The complex of these techniques is what we call now positron spectroscopy of solids. The field of application of the positron spectroscopy extends from advanced problems of solid-state physics to industrial applications in the area of characterization of high-tech materials. This volume focuses the attention on the physics that can be learned from positron-based methods, but also frames those methods in a wider context including other experimental approaches. It can be considered as a textbook on positron spectroscopy of solids, the sort of book that the newcomer takes for his approach to this field, but also as a useful research tool for the expert.

This comprehensive book reports on recent investigations of lattice imperfections in semiconductors by means of positron annihilation. It reviews positron techniques, and describes the application of these techniques to various kinds of defects, such as vacancies, impurity vacancy complexes and dislocations.

Over the years, many successful attempts have been chapters in this part describe the well-known processes made to describe the art and science of crystal growth, such as Czochralski, Kyropoulos, Bridgman, and o- and many review articles, monographs, symposium v- ing zone, and focus speci cally on recent advances in umes, and handbooks have been published to present improving these methodologies such as application of comprehensive reviews of the advances made in this magnetic elds, orientation of the growth axis, intro- eld. These publications are testament to the grow- duction of a pedestal, and shaped growth. They also ing interest in both bulk and thin- lm crystals because cover a wide range of materials from silicon and III–V of their electronic, optical, mechanical, microstructural, compounds to oxides and uorides. and other properties, and their diverse scienti c and The third part, Part C of the book, focuses on - technological applications. Indeed, most modern ad- lution growth. The various aspects of hydrothermal vances in semiconductor and optical devices would growth are discussed in two chapters, while three other not have been possible without the development of chapters present an overview of the nonlinear and laser many elemental, binary, ternary, and other compound crystals, KTP and KDP. The knowledge on the effect of crystals of varying properties and large sizes. The gravity on solution growth is presented through a c- literature devoted to basic understanding of growth parison of growth on Earth versus in a microgravity mechanisms, defect formation, and growth processes environment.

This book provides a comprehensive overview of positron profilometry, specifically focusing on the analysis of defect depth distribution in materials. Positron profilometry plays a crucial role in understanding and characterizing defects in a wide range of materials, including metals, semiconductors, polymers, and ceramics. By analyzing the depth distribution of defects, researchers can gain insights into various material properties, such as crystal structure, defect density, and diffusion behavior. The author's extensive research spanning a period of two decades has primarily centered on subsurface zones. These regions, located beneath the surface and subjected to various surface processes, play a crucial role in generating defect distributions. Three experimental techniques and their data analysis are described in detail: a variable-energy positron beam (VEP) called sometimes a slow positron beam, a technique called implantation profile depth scanning (DSIP), and a sequential etching (SET) technique. The usability of these techniques is illustrated by many examples of measurements by the author and others.

The NATO Advanced Research Workshop on Fundamental Aspects of Inert Gases in Solids, held at Bonas, France from 16-22 September 1990, was the fifth in a series of meetings that have been held in this topic area since 1979. The Consultants' Meeting in that year at Harwell on Rare Gas Behaviour in Metals and Ionic Solids was followed in 1982 by the Jiilich Inter national Symposium on Fundamental Aspects of Helium in Metals. Two smaller meetings have followed-a CECAM organised workshop on Helium Bubbles in Metals was held at Orsay, France in 1986 while in February 1989, a Topical Symposium on Noble Gases in Metals was held in Las Vegas as part of the large TMS/AIME Spring Meeting. As is well known, the dominating feature of inert gas atoms in most solids is their high heat of solution, leading in most situations to an essentially zero solubility and gas-atom precipita tion. In organising the workshop, one particular aim was to target the researchers in the field of inert-gas/solid interactions from three different areas--namely metals, tritides and nuclear fuels-in order to encourage and foster the cross-fertilisation of approaches and ideas. In these three material classes, the behaviour of inert gases in metals has probably been most studied, partly from technological considerations-the effects of helium production via (n, a) reac tions during neutron irradiation are of importance, particularly in a fusion reactor environ ment-and partly from a more fundamental viewpoint.