Multi-antenna techniques are widely considered to be the most promising avenue for significantly increasing the bandwidth efficiency of wireless data transmission systems. In so called MIMO (multiple input multiple output) systems, multiple antennas are deployed both at the transmitter and the receiver. In MISO (multiple input single output) systems, the receiver has only one antenna, and the multiple transmit antennas are used for transmit diversity. The key aspects of multiple antenna transceiver techniques for evolving 3G systems and beyond are presented. MIMO and MISO (transmit diversity) techniques are explained in a common setting. In particular, the book covers linear processing transmit diversity methods with and without side information at the transmitter (feedback), including the current transmit diversity concepts in the WCDMA standards, as well as promising MIMO concepts, crucial for future high data rate systems. As an example, MIMO and MISO aspects of 3GPP HSDPA (high speed downlink packet access) will be considered. Furthermore, examples of high throughput, low complexity space-time codes will be provided, when signalling without side information (open loop concepts). The theory of linear space-time block codes will be developed, and optimal non-orthogonal high throughput codes will be constructed, both for MIMO and MISO systems. Performance may be further improved by feedback from receiver to transmitter. The corresponding closed loop modes in the current 3GPP specifications will be discussed, along with their extensions for more than two transmit antennas. In addition, feedback signalling for MIMO channels will be addressed. Optimal quantisation methods of the feedback messages will be discussed. Finally, hybrid schemes are constructed, where the amount of feedback is reduced using partly open, partly closed loop signalling. * Provides a concise and up-to-date description of perhaps the most active area of research in wireless communications * Unique in presenting recent developments in both WCDMA and MIMO * MIMO and MISO techniques are explained in a common setting * Special emphasis is placed on combining theoretical understanding with engineering applicability For Research engineers in academia and industry, and development engineers in 3G system design as well as research students.

MIMO Processing for 4G and Beyond: Fundamentals and Evolution offers a cutting-edge look at multiple-input multiple-output (MIMO) signal processing, namely its detection (in both time and frequency domains) and precoding. It examines its integration with OFDM, UWB, and CDMA, along with the impact of these combinations at the system level. Massive M

This book will be a comprehensive collection of advanced concepts related to 4th generation wireless communication systems. It will be divided into two main parts: resource allocation and transceiver architectures. These two research areas are at the core of the recent advances experimented by wireless communication systems. Each chapter will cover a relevant, timely, topic with two focuses: a first part which is of tutorial and survey nature, reviews the state of the art in that topic, followed by a more deep treatment including current research topics, case studies and performance analysis.

In the last two decades, the wireless arena has witnessed the emergence of an astonishing number of technologies which play a part in the definition of new wireless systems. Driven by the pressing capacity demand, the research community has developed several technological enablers. Fundamental technological building blocks that will be part of wireless systems in the near-future definitely include: Orthogonal Frequency Division Multiplexing (OFDM) modulation at the physical (PHY) layer, Multiple Input Multiple.Output (MIMO) systems, and a cross-layer (CL) stack design. While the benefits of OFDM have been recognized for several years, the real capacity improvement of MIMO antennae is still being debated today. As to the lastpoint, even if opportunities for CL have been pointed out for a long time, the impact on the actual legacy systems has not been noticeable, as investors are hesitant to implement the inherent design paradigm shift.Single and Cross-Layer MIMO Techniques for IMT-Advanced will present some advanced MIMO techniques where adaptivity, cross-layer approach, and MIMO antennae are analyzed together to show a deep impact on the sum-capacityachievable over the wireless link.The introduction presents the functional requirements for IMT-A candidate systems and the relation between IEEE802.16 and LTE wireless access networks. Then, in the first part, adaptive strategies are analyzedseparately at the PHY and Medium Access Control (MAC) layers. The second part presents an evolution of the previous approach, providing a cross-layer MIMO-ARQ protocol, where adaptive MIMO schemes, namely SpatialMultiplexing (SM) and STBC Alamouti, are used with ARQ protocol. A Multiple User (MU) network is served in DownLink (DL) with a Round Robin (RR) scheduler; the design is ready to include more advanced schedulers. The ARQstate machine at the MAC layer is aware of per-antenna ARQ. The interaction between the ARQ and the PHY layer, with a per-antenna ACK, allows resource exploitation to increase with per-antenna ACKs, shifting from MIMO Signal Processing Gain to MIMO Protocol Gain with no need for Channel State Information (CSI) feedback. The absence of CSI feedback at the PHY layer is an important characteristic of the proposedMIMO-ARQ cross-layer designs since MIMO CSI feedback (when feasible) drastically reduces the network efficiency.The added degrees of freedom offered by MIMO transmissions can make the difference if correctly exploited both at the physical and medium access layers, in particular for overcoming the problem of low MIMO channel ranks.The advantages of the paradigm shift from signal processing gain to protocol gain - together with the modifications to be applied at the classical protocol stack - are discussed in the final chapter.

Antennas From Theory to Practice Comprehensive coverage of the fundamentals and latest developments in antennas and antenna design In the newly revised Second Edition of Antennas: From Theory to Practice, renowned researcher, engineer, and author Professor Yi Huang delivers comprehensive and timely coverage of issues in modern antenna design and theory. Practical and accessible, the book is written for engineers, researchers, and students who work with radio frequency/microwave engineering, radar, and radio communications. The book details the basics of transmission lines, radiowaves and propagation, antenna theory, antenna analysis and design using industrial standard design software tools and the theory of characteristic modes, antenna measurement equipment, facilities, and techniques. It also covers the latest developments in special topics, like small and mobile antennas, wide- and multi-band antennas, automotive antennas, RFID, UWB, metamaterials, reconfigurable and MIMO antennas, and more. The new edition includes up to date information on a wide variety of newly relevant topics and trends, like adaptive impedance matching, the theory of characteristic modes, antenna materials and fabrication processes, and over-the-air (OTA) antenna system measurements. Many questions and examples are provided which enhances the ­learning experience. The book covers: An introduction to circuit concepts and transmission lines, including lumped and distributed element systems, transmission line theory, and the Smith Chart An exploration of field concepts and radiowaves, including wave equations and solutions and radiowave propagation mechanisms, characteristics, and models Discussions of antenna basics and popular antennas, including wire-type antennas, aperture-type antennas, and antenna arrays Information about antenna manufacturing and measurements, including antenna measurement facilities and methods The use of industrial standard simulation tools for antenna design and analysis Perfect for engineers and researchers who work in RF engineering or radar and radio communications, Antennas: From Theory to Practice, Second Edition will also earn a place on the bookshelves of university students seeking a concise and practical introduction to the basics of antennas and antenna design.

A timely addition to the understanding of IMT-Advanced, this book places particular emphasis on the new areas which IMT-Advanced technologies rely on compared with their predecessors. These latest areas include Radio Resource Management, Carrier Aggregation, improved MIMO support and Relaying. Each technique is thoroughly described and illustrated before being surveyed in context of the LTE-Advanced standards. The book also presents state-of-the-art information on the different aspects of the work of standardization bodies (such as 3GPP and IEEE), making global links between them. Explores the latest research innovations to assess the future of the LTE standard Covers the latest research techniques for beyond IMT-Advanced such as Coordinated multi-point systems (CoMP), Network Coding, Device-to-Device and Spectrum Sharing Contains key information for researchers from academia and industry, engineers, regulators and decision makers working on LTE-Advanced and beyond

Cable and Wireless Networks: Theory and Practice presents a comprehensive approach to networking, cable and wireless communications, and networking security. It describes the most important state-of-the-art fundamentals and system details in the field, as well as many key aspects concerning the development and understanding of current and emergent services. In this book, the author gathers in a single volume current and emergent cable and wireless network services and technologies. Unlike other books, which cover each one of these topics independently without establishing their natural relationships, this book allows students to quickly learn and improve their mastering of the covered topics with a deeper understanding of their interconnection. It also collects in a single source the latest developments in the area, typically only within reach of an active researcher. Each chapter illustrates the theory of cable and wireless communications with relevant examples, hands-on exercises, and review questions suitable for readers with a BSc degree or an MSc degree in computer science or electrical engineering. This approach makes the book well suited for higher education students in courses such as networking, telecommunications, mobile communications, and network security. This is an excellent reference book for academic, institutional, and industrial professionals with technical responsibilities in planning, design and development of networks, telecommunications and security systems, and mobile communications, as well as for Cisco CCNA and CCNP exam preparation.