In recent years, a considerable amount of effort has been devoted, both in industry and academia, towards the design, performance analysis and evaluation of modulation schemes to be used in wireless and optical networks, towards the development of the next and future generations of mobile cellular communication systems. Modulation Theory is intended to serve as a complementary textbook for courses dealing with Modulation Theory or Communication Systems, but also as a professional book, for engineers who need to update their knowledge in the communications area. The modulation aspects presented in the book use modern concepts of stochastic processes, such as autocorrelation and power spectrum density, which are novel for undergraduate texts or professional books, and provides a general approach for the theory, with real life results, applied to professional design. This text is suitable for the undergraduate as well as the initial graduate levels of Electrical Engineering courses, and is useful for the professional who wants to review or get acquainted with the a modern exposition of the modulation theory. The books covers signal representations for most known waveforms, Fourier analysis, and presents an introduction to Fourier transform and signal spectrum, including the concepts of convolution, autocorrelation and power spectral density, for deterministic signals. It introduces the concepts of probability, random variables and stochastic processes, including autocorrelation, cross-correlation, power spectral and cross-spectral densities, for random signals, and their applications to the analysis of linear systems. This chapter also includes the response of specific non-linear systems, such as power amplifiers. The book presents amplitude modulation with random signals, including analog and digital signals, and discusses performance evaluation methods, presents quadrature amplitude modulation using random signals. Several modulation schemes are discussed, including SSB, QAM, ISB, C-QUAM, QPSK and MSK. Their autocorrelation and power spectrum densities are computed. A thorough discussion on angle modulation with random modulating signals, along with frequency and phase modulation, and orthogonal frequency division multiplexing is provided. Their power spectrum densities are computed using the Wiener-Khintchin theorem.

This is a concise introduction into optical fiber communication. It covers important aspects from the physics of optical wave propagation and amplification to the essentials of modulation formats and receivers. The combination of a solid coverage of necessary fundamental theory with an in-depth discussion of recent relevant research results enables the reader to design modern optical fiber communication systems. The book serves both graduate students and professionals. It includes many worked examples with solutions for lecturers. For the second edition, Reinhold Noé made many changes and additions throughout the text so that this concise book presents the essentials of optical fiber communication in an easy readable and understandable way.

Wireless Local Loop (WLL) is now widely recognized as an economically viable technology for provision of telecommunication services to subscribers in sparsely populated as well as highly congested areas. However, the preparation of the business case, choice of a suitable technology, deployment planning, and radio and network system design for a WLL system depend on a range of technical and strategic planning variables. The scope of the book includes a systems-level coverage of the following topics: Introduction to WLL systems Fundamentals of Radio Systems Key cellular and cordless technologies WLL systems design - system components and interfaces WLL systems design - radio aspects Planning and deployment of WLL systems Examples of commercially available WLL systems Broadband applications and services

Single- and Multi-carrier Quadrature Amplitude Modulation Principles and Applications for Personal Communications, WLANs and Broadcasting L. Hanzo Department of Electronics and Computer Science, University of Southampton, UK W. Webb Motorola, Arlington Heights, USA formerly at Multiple Access Communications Ltd, Southampton, UK T. Keller Ubinetics, Cambridge Technology Centre, Melbourn, UK formerly at Department of Electronics and Computer Science, University of Southampton, UK Motivated by the rapid evolution of wireless communication systems, this expanded second edition provides an overview of most major single- and multi-carrier Quadrature Amplitude Modulation (QAM) techniques commencing with simple QAM schemes for the uninitiated through to complex, rapidly-evolving areas, such as arrangements for wide-band mobile channels. Targeted at the more advanced reader, the multi-carrier modulation based second half of the book presents a research-orientated outlook using a variety of novel QAM-based arrangements. * Features six new chapters dealing with the complexities of multi-carrier modulation which has found applications ranging from Wireless Local Area Networks (WLAN) to Digital Video Broadcasting (DVB) * Provides a rudimentary introduction for readers requiring a background in the field of modulation and radio wave propagation * Discusses classic QAM transmission issues relevant to Gaussian channels * Examines QAM-based transmissions over mobile radio channels * Incorporates QAM-related orthogonal techniques, considers the spectral efficiency of QAM in cellular frequency re-use structures and presents a QAM-based speech communications system design study * Introduces Orthogonal Frequency Division Multiplexing (OFDM) over both Gaussian and wideband fading channels By providing an all-encompassing self-contained treatment of single- and multi- carrier QAM based communications, a wide range of readers including senior undergraduate and postgraduate students, practising engineers and researchers alike will all find the coverage of this book attractive.

This edition features a wealth of new material on urban warfare, including a computer simulation of EW architecture alternatives for land-based forces based on urban constraints. It also includes an expanded section on time-hopped spread spectrum communications, more details on modern communication system technologies such as CDMA and OFDM, and an in-depth discussion on sources of urban noise. This practical resource is focused on showing the reader how to design and build jammers specifically targeted at spread spectrum, anti-jam communications. Moreover, it gives assistance in evaluating the expected performance of jamming systems against modern communications systems, and discover the best waveform to use to counter communication systems designed to be effective in jamming environments. While mathematical derivations in general are avoided, the book presents error rate performance equations for most modern digital anti-jam communication systems

The high level of technical detail included in standards specifications can make it difficult to find the correlation between the standard specifications and the theoretical results. This book aims to cover both of these elements to give accessible information and support to readers. It explains the current and future trends on communication theory and shows how these developments are implemented in contemporary wireless communication standards. Examining modulation, coding and multiple access techniques, the book is divided into two major sections to cover these functions. The two-stage approach first treats the basics of modulation and coding theory before highlighting how these concepts are defined and implemented in modern wireless communication systems. Part 1 is devoted to the presentation of main L1 procedures and methods including modulation, coding, channel equalization and multiple access techniques. In Part 2, the uses of these procedures and methods in the wide range of wireless communication standards including WLAN, WiMax, WCDMA, HSPA, LTE and cdma2000 are considered. An essential study of the implementation of modulation and coding techniques in modern standards of wireless communication Bridges the gap between the modulation coding theory and the wireless communications standards material Divided into two parts to systematically tackle the topic - the first part develops techniques which are then applied and tailored to real world systems in the second part Covers special aspects of coding theory and how these can be effectively applied to improve the performance of wireless communications systems