The ground is one of the most highly variable of engineering materials. It is therefore not surprising that geotechnical designs depend on local site conditions and local engineering experience. Engineering practices, relating to investigation and design methods site understanding and to safety levels acceptable to society, will therefore vary between different regions.The challenge in geotechnical engineering is to make use of worldwide geotechnical experience, established over many years, to aid in the development and harmonization of geotechnical design codes. Given the significant uncertainties involved, empiricism and engineering

This book presents articles covering a wide spectrum of topics in geotechnical engineering, including properties of soils, unsaturated soil mechanics, ground improvement, liquefaction and seismic studies, soil-structure interaction and stability analysis of man-made and natural slopes. The contributing authors are renowned researchers in their respective fields, which include soft ground improvement, seismic response of retaining structure using soil-structure Interaction (SSI) principles, and unsaturated soils. Based on keynote addresses and invited talks presented at the Indian Geotechnical Conference 2016, this book will prove a valuable resource for practicing engineers and researchers in the field of geotechnical engineering.

The latest 4th edition of the international standard on the principles of reliability for load bearing structures (ISO2394:2015) includes a new Annex D dedicated to the reliability of geotechnical structures. The emphasis in Annex D is to identify and characterize critical elements of the geotechnical reliability-based design process. This book contains a wealth of data and information to assist geotechnical engineers with the implementation of semi-probabilistic or full probabilistic design approaches within the context of established geotechnical knowledge, principles, and experience. The introduction to the book presents an overview on how reliability can play a complementary role within prevailing norms in geotechnical practice to address situations where some measured data and/or past experience exist for limited site-specifi c data to be supplemented by both objective regional data and subjective judgment derived from comparable sites elsewhere. The principles of reliability as presented in ISO2394:2015 provides the common basis for harmonization of structural and geotechnical design. The balance of the chapters describes the uncertainty representation of geotechnical design parameters, the statistical characterization of multivariate geotechnical data and model factors, semi-probabilistic and direct probability-based design methods in accordance to the outline of Annex D. This book elaborates and reinforces the goal of Annex D to advance geotechnical reliability-based design with geotechnical needs at the forefront while complying with the general principles of reliability given by ISO2394:2015. It serves as a supplementary reference to Annex D and it is a must-read for designing geotechnical structures in compliance with ISO2394:2015.

Establishes Geotechnical Reliability as Fundamentally Distinct from Structural Reliability Reliability-based design is relatively well established in structural design. Its use is less mature in geotechnical design, but there is a steady progression towards reliability-based design as seen in the inclusion of a new Annex D on "Reliability of Geotechnical Structures" in the third edition of ISO 2394. Reliability-based design can be viewed as a simplified form of risk-based design where different consequences of failure are implicitly covered by the adoption of different target reliability indices. Explicit risk management methodologies are required for large geotechnical systems where soil and loading conditions are too varied to be conveniently slotted into a few reliability classes (typically three) and an associated simple discrete tier of target reliability indices. Provides Realistic Practical Guidance Risk and Reliability in Geotechnical Engineering makes these reliability and risk methodologies more accessible to practitioners and researchers by presenting soil statistics which are necessary inputs, by explaining how calculations can be carried out using simple tools, and by presenting illustrative or actual examples showcasing the benefits and limitations of these methodologies. With contributions from a broad international group of authors, this text: Presents probabilistic models suited for soil parameters Provides easy-to-use Excel-based methods for reliability analysis Connects reliability analysis to design codes (including LRFD and Eurocode 7) Maximizes value of information using Bayesian updating Contains efficient reliability analysis methods Accessible To a Wide Audience Risk and Reliability in Geotechnical Engineering presents all the "need-to-know" information for a non-specialist to calculate and interpret the reliability index and risk of geotechnical structures in a realistic and robust way. It suits engineers, researchers, and students who are interested in the practical outcomes of reliability and risk analyses without going into the intricacies of the underlying mathematical theories.

Geotechnical Risk and Safety V contains contributions presented at the 5th International Symposium on Geotechnical Safety and Risk (5th ISGSR, Rotterdam, 13-16 October 2015) which was organized under the auspices of the Geotechnical Safety Network (GEOSNet) and the following technical committees of the of the International Society of Soil Mechanics and Geotechnical Engineering (ISSGME): • TC304 Engineering Practice of Risk Assessment & Management • TC205 Safety and Serviceability in Geotechnical Design • TC212 Deep Foundations • TC302 Forensic Geotechnical Engineering Geotechnical Risk and Safety V covers seven themes: 1. Geotechnical Risk Management and Risk Communication 2. Variability in Ground Conditions and Site Investigation 3. Reliability and Risk Analysis of Geotechnical Structures 4. Limit-state design in Geotechnical Engineering 5. Assessment and Management of Natural Hazards 6. Contractual and Legal Issues of Foundation and (Under)Ground Works 7. Case Studies, Monitoring and Observational Method The 5th ISGSR is the continuation of a series of symposiums and workshops on geotechnical risk and reliability, starting with LSD2000 (Melbourne, Australia), IWS2002 (Tokyo and Kamakura, Japan), LSD2003 (Cambridge, USA), Georisk2004 (Bangalore, India), Taipei2006 (Taipei, Taiwan), the 1st ISGSR (Shanghai, China, 2007), the 2nd ISGSR (Gifu, Japan, 2009), the 3rd ISGSR (Munich, Germany, 2011) and the 4th ISGSR (Hong Kong, 2013).

This textbook systematically introduces the theories, methods, and algorithms for geotechnical reliability analysis. There are a lot of illustrative examples in the textbook such that readers can easily grasp the concepts and theories related to geotechnical reliability analysis. A unique feature of the textbook is that computer codes are also provided through carefully designed examples such that the methods and the algorithms described in the textbook can be easily understood. In addition, the computer codes are flexible and can be conveniently extended to analyze different types of realistic problems with little additional efforts.

Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.