This paper overviews the general features of computer program 'HEC-5, Simulation of Flood Control and Conservation Systems', with emphasis on the capabilities of the most recent release of HEC-5, Version 7.2, dated March 1991. HEC-5 can simulate the essential features and operation goals and constraints of simple or complex systems with simulation intervals ranging from minutes to one month. Single event flood analysis and period of record conservation analysis may be accomplished with the model. Flood control analysis includes balanced system operation for downstream damage centers with consideration of forecasted local flows and hydrologic routing. In addition, induced surcharge operation based on spillway gate regulation schedules can be simulated. Hydropower analysis may include run-of-river, peaking, and pumped storage plants as well as system power operation. Water supply simulation can include reservoir and downstream flow requirements in addition to divers ions and return flows. Water Quality analysis can include simulation of temperature, dissolved oxygen, up to three conservative and up to three nonconservative constituents. Computer Programs, Simulation, Reservoirs, Flood Control, Reservoir Yield, Hydroelectric Power, Water Supply, Water Quality.

Dynamic programming is a method of solving multi-stage problems in which decisions at one stage become the conditions governing the succeeding stages. It can be applied to the management of water reservoirs, allowing them to be operated more efficiently. This is one of the few books dedicated solely to dynamic programming techniques used in reservoir management. It presents the applicability of these techniques and their limits on the operational analysis of reservoir systems. The dynamic programming models presented in this book have been applied to reservoir systems all over the world, helping the reader to appreciate the applicability and limits of these models. The book also includes a model for the operation of a reservoir during an emergency situation. This volume will be a valuable reference to researchers in hydrology, water resources and engineering, as well as professionals in reservoir management.

Dynamic programming is a method of solving multi-stage problems in which decisions at one stage become the conditions governing the succeeding stages. It can be applied to the management of water reservoirs, allowing them to be operated more efficiently. This is one of the few books dedicated solely to dynamic programming techniques used in reservoir management. It presents the applicability of these techniques and their limits on the operational analysis of reservoir systems. The dynamic programming models presented in this book have been applied to reservoir systems all over the world, helping the reader to appreciate the applicability and limits of these models. The book also includes a model for the operation of a reservoir during an emergency situation. This volume will be a valuable reference to researchers in hydrology, water resources and engineering, as well as professionals in reservoir management.