This textbook introduces readers to mixed-signal, embedded design and provides, in one place, much of the basic information to engage in serious mixed-signal design using Cypress' PSoC. Designing with PSoC technology can be a challenging undertaking, especially for the novice. This book brings together a wealth of information gathered from a large number of sources and combines it with the fundamentals of mixed-signal, embedded design, making the PSoC learning curve ascent much less difficult. The book covers, sensors, digital logic, analog components, PSoC peripherals and building blocks in considerable detail, and each chapter includes illustrative examples, exercises, and an extensive bibliography.

This textbook is written for junior/senior undergraduate and first-year graduate students in the electrical and computer engineering departments. Using PSoC mixed-signal array design, the authors define the characteristics of embedd design, embedded mixed-signal architectures, and top-down design. Optimized implementations of these designs are included to illustrate the theory. Exercises are provided at the end of each chapter for practice. Topics covered include the hardware and software used to implement analog and digital interfaces, various filter structures, amplifiers and other signal-conditioning circuits, pulse-width modulators, timers, and data structures for handling multiple similar peripheral devices. The practical exercises contained in the companion laboratory manual, which was co-authored by Cypress Staff Applications Engineer Dave Van Ess, are also based on PSoC. PSoC's integrated microcontroller, highly configurable analog/digital peripherals, and a full set of development tools make it an ideal learning tool for developing mixed-signal embedded design skills.

Design exibility and power consumption in addition to the cost, have always been the most important issues in design of integrated circuits (ICs), and are the main concerns of this research, as well. Energy Consumptions: Power dissipation (P ) and energy consumption are - diss pecially importantwhen there is a limited amountof power budgetor limited source of energy. Very common examples are portable systems where the battery life time depends on system power consumption. Many different techniques have been - veloped to reduce or manage the circuit power consumption in this type of systems. Ultra-low power (ULP) applications are another examples where power dissipation is the primary design issue. In such applications, the power budget is so restricted that very special circuit and system level design techniquesare needed to satisfy the requirements. Circuits employed in applications such as wireless sensor networks (WSN), wearable battery powered systems [1], and implantable circuits for biol- ical applications need to consume very low amount of power such that the entire system can survive for a very long time without the need for changingor recharging battery[2–4]. Using newpowersupplytechniquessuchas energyharvesting[5]and printable batteries [6], is another reason for reducing power dissipation. Devel- ing special design techniques for implementing low power circuits [7–9], as well as dynamic power management (DPM) schemes [10] are the two main approaches to control the system power consumption. Design Flexibility: Design exibility is the other important issue in modern in- grated systems.

Sampled Data Systems - ADCs for DSP Applications - DACs for DSP Applications - Fast Fourier Transforms - Digital Filters - DSP Hardware - Interfacing to DSPs - DSP Applications - Hardware Design Techniques.

Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

This book is the latest contribution to the Chip Design Languages series and it consists of selected papers presented at the Forum on Specifications and Design Languages (FDL'06), in September 2006. The book represents the state-of-the-art in research and practice, and it identifies new research directions. It highlights the role of specification and modelling languages, and presents practical experiences with specification and modelling languages.

More than ever, FDL is the place for researchers, developers, industry designers, academia, and EDA tool companies to present and to learn about the latest scientific achievements, practical applications and users experiences in the domain of specification and design languages. FDL covers the modeling and design methods, and their latest supporting tools, for complex embedded systems, systems on chip, and heterogeneous systems. FDL 2009 is the twelfth in a series of events that were held all over Europe, in selected locations renowned for their Universities and Reseach Institutions as well as the importance of their industrial environment in Computer Science and Micro-electronics. In 2009, FDL was organized in the attractive south of France area of Sophia Antipolis. together with the DASIP (Design and Architectures for Signal and Image Processing) Conference and the SAME (Sophia Antipolis MicroElectronics ) Forum. All submitted papers were carefully reviewed to build a program with 27 full and 10 short contributions. From these, the Program Committee selected a shorter list, based on the evaluations of the reviewers, and the originality and relevance of the work that was presented at the Forum. The revised, and sometimes extended versions of these contributions constitute the chapters of this volume. Advances in Design Methods from Modeling Languages for Embedded Systems and SoC’s presents extensions to standard specification and description languages, as well as new language-based design techniques and methodologies to solve the challenges raised by mixed signal and multi-processor systems on a chip. It is intended as a reference for researchers and lecturers, as well as a state of the art milestone for designers and CAD developers.