MICROPROCESSOR THEORY AND APPLICATIONS WITH 68000/68020 AND PENTIUM A SELF-CONTAINED INTRODUCTION TO MICROPROCESSOR THEORY AND APPLICATIONS This book presents the fundamental concepts of assembly language programming and system design associated with typical microprocessors, such as the Motorola MC68000/68020 and Intel® Pentium®. It begins with an overview of microprocessors—including an explanation of terms, the evolution of the microprocessor, and typical applications—and goes on to systematically cover: Microcomputer architecture Microprocessor memory organization Microprocessor Input/Output (I/O) Microprocessor programming concepts Assembly language programming with the 68000 68000 hardware and interfacing Assembly language programming with the 68020 68020 hardware and interfacing Assembly language programming with Pentium Pentium hardware and interfacing The author assumes a background in basic digital logic, and all chapters conclude with a Questions and Problems section, with selected answers provided at the back of the book. Microprocessor Theory and Applications with 68000/68020 and Pentium is an ideal textbook for undergraduate- and graduate-level courses in electrical engineering, computer engineering, and computer science. (An instructor’s manual is available upon request.) It is also appropriate for practitioners in microprocessor system design who are looking for simplified explanations and clear examples on the subject. Additionally, the accompanying Website, which contains step-by-step procedures for installing and using Ide 68k21 (68000/68020) and MASM32 / Olly Debugger (Pentium) software, provides valuable simulation results via screen shots.

A thorough revision that provides a clear understanding of the basic principles of microcontrollers using C programming and PIC18F assembly language This book presents the fundamental concepts of assembly language programming and interfacing techniques associated with typical microcontrollers. As part of the second edition's revisions, PIC18F assembly language and C programming are provided in separate sections so that these topics can be covered independent of each other if desired. This extensively updated edition includes a number of fundamental topics. Characteristics and principles common to typical microcontrollers are emphasized. Interfacing techniques associated with a basic microcontroller such as the PIC18F are demonstrated from chip level via examples using the simplest possible devices, such as switches, LEDs, Seven-Segment displays, and the hexadecimal keyboard. In addition, interfacing the PIC18F with other devices such as LCD displays, ADC, and DAC is also included. Furthermore, topics such as CCP (Capture, Compare, PWM) and Serial I/O using C along with simple examples are also provided. Microcontroller Theory and Applications with the PIC18F, 2nd Edition is a comprehensive and self-contained book that emphasizes characteristics and principles common to typical microcontrollers. In addition, the text: Includes increased coverage of C language programming with the PIC18F I/O and interfacing techniques Provides a more detailed explanation of PIC18F timers, PWM, and Serial I/O using C Illustrates C interfacing techniques through the use of numerous examples, most of which have been implemented successfully in the laboratory This new edition of Microcontroller Theory and Applications with the PIC18F is excellent as a text for undergraduate level students of electrical/computer engineering and computer science.

Microprocessors and Microcomputer-Based System Design, Second Edition, builds on the concepts of the first edition. It discusses the basics of microprocessors, various 32-bit microprocessors, the 8085 microprocessor, the fundamentals of peripheral interfacing, and Intel and Motorola microprocessors. This edition includes new topics such as floating-point arithmetic, Program Array Logic, and flash memories. It covers the popular Intel 80486/80960 and Motorola 68040 as well as the Pentium and PowerPC microprocessors. The final chapter presents system design concepts, applying the design principles covered in previous chapters to sample problems.

The next generation of computer system designers will be less concerned about details of processors and memories, and more concerned about the elements of a system tailored to particular applications. These designers will have a fundamental knowledge of processors and other elements in the system, but the success of their design will depend on the skills in making system-level tradeoffs that optimize the cost, performance and other attributes to meet application requirements. This book provides a new treatment of computer system design, particularly for System-on-Chip (SOC), which addresses the issues mentioned above. It begins with a global introduction, from the high-level view to the lowest common denominator (the chip itself), then moves on to the three main building blocks of an SOC (processor, memory, and interconnect). Next is an overview of what makes SOC unique (its customization ability and the applications that drive it). The final chapter presents future challenges for system design and SOC possibilities.

* Emphasis is on timing diagrams and analysis of microprocessor read/write cycles so students get a clear understanding of the timing requirements of a microprocessor..* In-depth presentation of both microprocessor architecture and microprocessor organization gives students the most complete of 68000 microprocessor hardware..* Thorough introduction to 68000 assembly language programming (four chapters on this topic)..

Fundamentals of Digital Logic and Microcomputer Design, haslong been hailed for its clear and simple presentation of theprinciples and basic tools required to design typical digitalsystems such as microcomputers. In this Fifth Edition, the authorfocuses on computer design at three levels: the device level, thelogic level, and the system level. Basic topics are covered, suchas number systems and Boolean algebra, combinational and sequentiallogic design, as well as more advanced subjects such as assemblylanguage programming and microprocessor-based system design.Numerous examples are provided throughout the text. Coverage includes: Digital circuits at the gate and flip-flop levels Analysis and design of combinational and sequentialcircuits Microcomputer organization, architecture, and programmingconcepts Design of computer instruction sets, CPU, memory, and I/O System design features associated with popular microprocessorsfrom Intel and Motorola Future plans in microprocessor development An instructor's manual, available upon request Additionally, the accompanying CD-ROM, contains step-by-stepprocedures for installing and using Altera Quartus II software,MASM 6.11 (8086), and 68asmsim (68000), provides valuablesimulation results via screen shots. Fundamentals of Digital Logic and Microcomputer Design is anessential reference that will provide you with the fundamentaltools you need to design typical digital systems.

Embedded Systems Architecture is a practical and technical guide to understanding the components that make up an embedded system's architecture. This book is perfect for those starting out as technical professionals such as engineers, programmers and designers of embedded systems; and also for students of computer science, computer engineering and electrical engineering. It gives a much-needed 'big picture' for recently graduated engineers grappling with understanding the design of real-world systems for the first time, and provides professionals with a systems-level picture of the key elements that can go into an embedded design, providing a firm foundation on which to build their skills. - Real-world approach to the fundamentals, as well as the design and architecture process, makes this book a popular reference for the daunted or the inexperienced: if in doubt, the answer is in here! - Fully updated with new coverage of FPGAs, testing, middleware and the latest programming techniques in C, plus complete source code and sample code, reference designs and tools online make this the complete package - Visit the companion web site at http://booksite.elsevier.com/9780123821966/ for source code, design examples, data sheets and more - A true introductory book, provides a comprehensive get up and running reference for those new to the field, and updating skills: assumes no prior knowledge beyond undergrad level electrical engineering - Addresses the needs of practicing engineers, enabling it to get to the point more directly, and cover more ground. Covers hardware, software and middleware in a single volume - Includes a library of design examples and design tools, plus a complete set of source code and embedded systems design tutorial materials from companion website