Methods of Treatment of Unstable Ground focuses on the methods of treatment that have been adopted by engineers in their attempts to make unstable ground usable. These methods are meant to stabilize ground, either temporarily as in ground-water lowering or freezing techniques, or permanently as in grouting. This book is comprised of 11 chapters. The first of which reviews some of the modern techniques in addressing problems caused by unstable ground, including those caused by water in excavations, instability of natural or excavated slopes, the settlement of structures on soft or loose soils, and subsidence due to extraction of minerals from the ground. These techniques range from ground-water lowering to the use of an impermeable barrier around the excavation to prevent inflow and at the same time maintain the surrounding water table at its normal level. Attention then turns to the use of electro-osmosis and electrochemical stabilization in ground engineering; control of groundwater by excluding it through grouting; and fundamental conditions governing the penetration of grouts. The remaining chapters explore grout selection based on engineering performance; ground conditions in mining areas; clay grouting and alluvial grouting; and ground freezing. Finally, the use of cement to stabilize soil and of vibroflotation to improve poor ground below foundations of structures is described. This book should prove useful to engineers engaged in ground engineering.

This book provides a review of problems during design and construction on problematic soils. Design methods, site investigation, construction and analysis of the various improvement methods available are explained and discussed. Various regions may have different soils with geotechnical problems that differ from those faced in other regions. For example, in Southeast Asia, the common geotechnical problems are those associated with construction on soft clays and organic soils, while in the arid region of the Middle East, problems are generally associated with the desert soils. In the US, the problems are associated with organic soils, expansive and collapsing soils, and shale. Laterite and lateritic soils are especially problematic in Mexico. Similarly, in Europe, for example, the geotechnical problems are associated with loess (France), and organic soil (Germany). A detailed description of various methods of ground improvement has been provided in 11 chapters. Each chapter deals not only with a description of the method but also focuses on region-specific ground problems and suitable ground improvement techniques. Case studies have also been included. One general chapter is dedicated to site investigation, instrumentation, assessment and control. This book will be of value to students and professionals in the fields of civil and geotechnical engineering, as well as to soil scientists and engineering geologists.

Due to the unavailability of good construction sites owing to the growth of cities and industries, the site engineers are nowadays compelled to adopt methods of forcing the weak soil to behave according to the project requirement. Written in the same context, the book focuses on the fundamental principles and practical methods of ground improvement. The design and constructional procedure of different ground improvement methods are comprehensively covered in the text. The subject-matter, divided into fourteen chapters, is organised into a simplified and logical manner to describe first the working methods and then the possible future developments. The book enables its readers to become aware of the overall methodology to be adopted in a particular case and seek possible solution to the chosen field. It is primarily intended to cater the needs of undergraduate and postgraduate students of civil engineering and geotechnical engineering. KEY FEATURES • Numerous figures, tables and mathematical equations are provided to support the topics discussed. • Several worked-out examples are provided in most of the chapters. • Objective questions, descriptive questions and references are given at the end of each chapter. • Numerical questions are given for practice in the relevant chapters. • An appendix introduces miscellaneous topics related to soil.

Gain a stronger foundation with optimal ground improvement Before you break ground on a new structure, you need to analyze the structure of the ground. Expert analysis and optimization of the geo-materials on your site can mean the difference between a lasting structure and a school in a sinkhole. Sometimes problematic geology is expected because of the location, but other times it's only unearthed once construction has begun. You need to be able to quickly adapt your project plan to include an improvement to unfavorable ground before the project can safely continue. Principles and Practice of Ground Improvement is the only comprehensive, up-to-date compendium of solutions to this critical aspect of civil engineering. Dr. Jie Han, registered Professional Engineer and preeminent voice in geotechnical engineering, is the ultimate guide to the methods and best practices of ground improvement. Han walks you through various ground improvement solutions and provides theoretical and practical advice for determining which technique fits each situation. Follow examples to find solutions to complex problems Complete homework problems to tackle issues that present themselves in the field Study design procedures for each technique to simplify field implementation Brush up on modern ground improvement technologies to keep abreast of all available options Principles and Practice of Ground Improvement can be used as a textbook, and includes Powerpoint slides for instructors. It's also a handy field reference for contractors and installers who actually implement plans. There are many ground improvement solutions out there, but there is no single right answer to every situation. Principles and Practice of Ground Improvement will give you the information you need to analyze the problem, then design and implement the best possible solution.

The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d

More than ten years have passed since the first edition was published. During that period there have been a substantial number of changes in geotechnical engineering, especially in the applications of foundation engineering. As the world population increases, more land is needed and many soil deposits previously deemed unsuitable for residential housing or other construction projects are now being used. Such areas include problematic soil regions, mining subsidence areas, and sanitary landfills. To overcome the problems associated with these natural or man-made soil deposits, new and improved methods of analysis, design, and implementation are needed in foundation construction. As society develops and living standards rise, tall buildings, transportation facilities, and industrial complexes are increasingly being built. Because of the heavy design loads and the complicated environments, the traditional design concepts, construction materials, methods, and equipment also need improvement. Further, recent energy and material shortages have caused additional burdens on the engineering profession and brought about the need to seek alternative or cost-saving methods for foundation design and construction.