This study utilized I DOT mechanistic-empirical (M-E) procedures and Mn/ROAD low-volume road (LVR) data and information to verify/refine/modify analysis and design concepts and procedures for L VR flexible pavements. The Mn/ROAD L VR flexible pavements include conventional flexible, full-depth asphalt, surface-treatment and aggregate-surface sections. Laboratory test results, field distress measurements, and FWD test data were used to study the affect of granular material quality on pavement performance and deflection response. The results from the rapid shear tests, permanent deformation tests and field rutting measurements show that granular material rutting potential can be characterized by a rapid shear triaxial test at 15-psi confining pressure. For conventional flexible pavements, granular material quality did not affect the pavement deflection response, but material quality effects were significant for aggregate-surface and surface-treatment pavements. ILLI-PAVE predicted pavement responses were fairly accurate for sections with thicker asphalt concrete surfaces. The FWD deflection basin parameter AUPP (Area Under Pavement Profile) can be used to predict the strains at the bottom of AC layer. Effect of subgrade type on pavement response and performance was studied. Sandy subgrades showed little or no change in pavement structural response due to spring-thaw effects. For the cohesive subgrade sections, moisture changes and spring-thaw effects increased surface deflections. The study showed that the lOOT LVR flexible pavement mechanistic-empirical design concepts and procedures are valid and adequate.

This book is an outcome of the sixth conference on bearing capacity of roads and airfield held in Lisbon, Portugal. It covers the following topics: bearing capacity policies, concepts, costs and condition surveys; analysis and modelling; design and environmental effects; and asphalt mixtures.

This study utilized Illinois DOT (IDOT) mechanistic-empirical (M-E) technology and Mn/ROAD mainline pavement section data and information to verify/refine/modify IDOT M-E analysis and design concepts and procedures for full-depth asphalt concrete (FDAC) and conventional flexible pavements (CFP). The Mn/ROAD mainline flexible pavements include eleven CFP and three FDAC pavement sections. Four different granular materials were used in the conventional flexible pavements. A fine-grained soil subgrade (R-value of about 12) is present throughout the mainline. Laboratory material testing results, field distress measurements, and FWD test data were used to study pavement deflection response and performance (rutting and asphalt concrete fatigue). The study demonstrated that the IDOT M-E analysis and design procedures for FDAC and CFP sections are adequate. The ILLI-PA VE structural model adequately predicts the pavement responses. The use of bi-linear (arithmetic) subgrade model and the "theta" granular material model ILLI-PA VE inputs closely replicate CFP field FWD deflection responses. The effect of granular material quality on CFP deflection response is very limited. The ILLI-PAVE FWD backcalculation algorithms are adequate for estimating the moduli of asphalt concrete and sub grade soils.

Sustainable and resilient critical infrastructure systems is an emerging paradigm in an evolving era of depleting assets in the midst of natural and man-made threats to provide a sustainable and high quality of life with optimized resources from social, economic, societal and environmental considerations. The increasing complexity and interconnectedness of civil and other interdependent infrastructure systems (electric power, energy, cyber-infrastructures, etc.) require inter- and multidisciplinary expertise required to engineer, monitor, and sustain these distributed large-scale complex adaptive infrastructure systems. This edited book is motivated by recent advances in simulation, modeling, sensing, communications/information, and intelligent and sustainable technologies that have resulted in the development of sophisticated methodologies and instruments to design, characterize, optimize, and evaluate critical infrastructure systems, their resilience, and their condition and the factors that cause their deterioration. Specific topics discussed in this book include, but are not limited to: optimal infrastructure investment allocation for sustainability, framework for manifestation of tacit critical infrastructure knowledge, interdependencies between energy and transportation systems for national long term planning, intelligent transportation infrastructure technologies, emergent research issues in infrastructure interdependence research, framework for assessing the resilience of infrastructure and economic systems, maintenance optimization for heterogeneous infrastructure systems, optimal emergency infrastructure inspection scheduling, and sustainable rehabilitation of deteriorated transportation infrastructure systems.

Innovations in Road, Railway and Airfield Bearing Capacity – Volume 3 comprises the third part of contributions to the 11th International Conference on Bearing Capacity of Roads, Railways and Airfields (2022). In anticipation of the event, it unveils state-of-the-art information and research on the latest policies, traffic loading measurements, in-situ measurements and condition surveys, functional testing, deflection measurement evaluation, structural performance prediction for pavements and tracks, new construction and rehabilitation design systems, frost affected areas, drainage and environmental effects, reinforcement, traditional and recycled materials, full scale testing and on case histories of road, railways and airfields. This edited work is intended for a global audience of road, railway and airfield engineers, researchers and consultants, as well as building and maintenance companies looking to further upgrade their practices in the field.

Functional Pavement Design is a collections of 186 papers from 27 different countries, which were presented at the 4th Chinese-European Workshops (CEW) on Functional Pavement Design (Delft, the Netherlands, 29 June-1 July 2016). The focus of the CEW series is on field tests, laboratory test methods and advanced analysis techniques, and cover analysis, material development and production, experimental characterization, design and construction of pavements. The main areas covered by the book include: - Flexible pavements - Pavement and bitumen - Pavement performance and LCCA - Pavement structures - Pavements and environment - Pavements and innovation - Rigid pavements - Safety - Traffic engineering Functional Pavement Design is for contributing to the establishment of a new generation of pavement design methodologies in which rational mechanics principles, advanced constitutive models and advanced material characterization techniques shall constitute the backbone of the design process. The book will be much of interest to professionals and academics in pavement engineering and related disciplines.