may never overcome the effects of hysteresis and stress (see Chapters 6 and 12). The first sentence of the reference work, Handbook of Liquid Crystals, reads: The terms liquid crystals, crystalline liquid, mesophase, and mesomorphous state are used synonymously to describe a state of aggregation that exhibits a molecular order in a size range similar to that of a crystal but acts more or less as a viscous liquid: [2] In other words, molecules within a liquid crystalline phase possess some orientational order and lack positional order; furthermore, the shape of a liquid crystalline sample is determined by the vessel in which it is contained rather than by the orientational order of its aggregated molecules. The authors recognized the limitations and imprecision of this definition but, like others preceding them, could not devise a simple and generally applicable one that is better. Regardless, the terms 'liquid crystal' and 'mesophase' should not be used interchangeably. As mentioned above, all liquid crystals are mesophases, but all mesophases are not liquid crystals. Recent studies, employing elaborate and sophisticated analytical techniques, have permitted finer distinctions between classical crystals and mesophases. At the same time, they have made definitions like that from the Handbook of Liquid Crystals somewhat obsolete for reasons other than terminology. One part of the problem arises from the use of a combination of bulk properties (like flow) and microscopic properties (like molecular ordering) within the same definition.

Liquid crystal polymers (LCPs) have many strange properties that may be utilized to advantage in the processing of products made from them and their blends with isotropic polymers. This volume (volume 2 in the series Polymer Liquid Crystals) deals with their strange flow behaviour and the models put forward to explain the phenomena that occur in such polymers and their blends. It has been known for some time that small ad ditions of a thermotropic LCP to isotropic polymers not only gives an improvement in the strength and stiffness of the blend but improves the processability of the blend over that of the isotropic polymer. In the case of lyotropic LCPs, it is possible to create a molecular composite in which the reinforcement of an isotropic polymer is achieved at a molecular level by the addition of the LCP in a common solvent. If the phenomena can be fully understood both the reinforcement and an increase in the proces sability of isotropic polymers could be optimized. This book is intended to illustrate the current theories associated with the flow of LCPs and their blends in the hope that such an optimization will be achieved by future research. Chapter 1 introduces the subject of LCPs and describes the ter minology used; Chapter 2 then discusses the more complex phenomena associated with these materials. In Chapter 3, the way in which these phe nomena may be modelled using hamiltonians is fully covered.

Design and Applications of Nanostructured Polymer Blend and Nanocomposite Systems offers readers an intelligent, thorough introduction to the design and applications of this new generation of designer polymers with customized properties. The book assembles and covers, in a unified way, the state-of-the-art developments of this less explored type of material. With a focus on nanostructured polymer blends, the book discusses the science of nanostructure formation and the potential performance benefits of nanostructured polymer blends and composites for applications across many sectors: electronics, coatings, adhesives, energy (photovoltaics), aerospace, automotive, and medical devices (biocompatible polymers). The book also describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties. - Covers all important information for designing and selecting the right nanostructured polymer system - Provides specialized knowledge on self-repairing, nanofibre and nanostructured multiphase materials, as well as evaluation and testing of nanostructured polymer systems - Serves as a reference guide for development of new products in industries ranging from electronics, coatings, and energy, to transport and medical applications - Describes the design, morphology, and structure of nanostructured polymer composites and blends to achieve specific properties

"High Performance Polymers and Their Nanocomposites" fasst die unzähligen Forschungsergebnisse aus der jüngsten Zeit im Bereich der Hochleistungspolymere zusammen, u. a. Nanokomposite auf Basis von Hochleistungspolymeren, Flüssigkristallpolymere, Polyamid 4, 6, Polyamidimide, Polyacrylamide, Komposite auf Basis von Polyacrylamiden für verschiedene Anwendungen, Polybenzimidazole, Polycyclohexylen-Dimethylterephthalate, Polyetheretherketone, Polyetherimide, Polyetherketoneketone, Polyetherfulfone, Polyphenylensulfide, Polyphenylsulfone, Polyphthalamide, Polysulfone, eigenverstärkte Polyphenylene, thermoplastische Polyimide.

Distinguishing among blends, alloys and other types of combinations, clarifying terminology and presenting data on new processes and materials, this work present up-to-date and effective compounding techniques for polymers. It offers extensive analyses on the challenging questions that surround miscibility, compatibility, dynamic processing, interaction/phase behaviour, and computer simulations for predicting behaviours of polymer mixture and interaction.

A 2006 edition explaining the underlying science and applications of liquid crystalline polymers.