Volume I illustrates many of the typical worksites describing the most common conditions encountered. The information provided can be used to supplement local, state, and national standards. The topics include, among others: Public information, regulatory control, special traffic provisions, protection of pedestrians, flagging, temporary traffic signals, and nighttime procedures. Volume II is intended primarily for use by job site supervisors. It addresses the most common situations, problems and solutions that supervisors might be faced with. The topics include, among others: Emergency work moving operations, temporary traffic control devices, placing devices, temporary removal of signs, and pedestrian needs.

Volume I illustrates many of the typical worksites describing the most common conditions encountered. The information provided can be used to supplement local, state, and national standards. The topics include, among others: Public information, regulatory control, special traffic provisions, protection of pedestrians, flagging, temporary traffic signals, and nighttime procedures. Volume II is intended primarily for use by job site supervisors. It addresses the most common situations, problems and solutions that supervisors might be faced with. The topics include, among others: Emergency work moving operations, temporary traffic control devices, placing devices, temporary removal of signs, and pedestrian needs.

As of January 13, 2012, the California Department of Transportation replaced the Caltrans Traffic Manual with a 2012 California Manual of Uniform Traffic Control Devices. Part 6 of the 2012 MUTCD covers temporary Traffic Controls, and now BNi Building News has assembled all of the essential figures and illustrations from part 6 into a convenient, pocket-sized guide that can be easily referenced on the jobsite. Without having to carry a 320-page manual on the jobsite, you can have full access to the temporary traffic control graphics from the California MUTCD anywhere you go.