An unforgettable look inside the Cigar Box Guitar Revolution. Beautiful new color photographs of more than 120 amazing homemade musical instruments. Stunning profiles of DIY musical greatness, from two-string guitars and diddley bows to an electrified washtub bass. New step-by-step project for building your own tenor ukulele.

Cigar box guitars have never been more popular and now crafters can learn to make their own. All they need to do is follow the author's step-by-step instructions for making three different styles of guitar. They're fun (some would say addictive) to build and even more fun to play.

(Book). Every guitarist dreams of owning a handmade instrument, but for most, the cost is likely to be prohibitive. The alternative building your own fine guitar is not as difficult as you might imagine, given some skill, patience, and the expert guidance of a master luthier. Every step of construction is fully covered, from choice, selection, and preparation of woods, to consideration of size, bracing, and tonal qualities. Each step of the building sequence is clearly photographed in color, with variations to the standard design shown to enable you to personalize your instrument as you make it. Briston, England-based Jonathan Kinkead has been building guitars for nearly 30 years. His craft is born out of experience and intuition rather than a strict following of technical detail. The resulting beauty of form and distinctive tone have earned him his reputation as one of the world's most respected independent luthiers.

Hand-making musical instruments is part of a growing trend that even celebrities such as Jonny Depp and guitar legend Jack White are taking part in. It doesn't require a lot of money or an expertise in woodworking and electronics, all it takes is a little creativity. In Handmade Music Factory, handyman Mike Orr guides you through the construction of eight of the most unique and imaginative instruments found anywhere - from a one-string guitar made from a soup can, to a hubcap banjo, and a stand-up lap steel guitar made from a vintage ironing board. There are also directions for an amp that can be assembled using inexpensive parts from the local electronics store. There's no shortage of inspiration to draw upon in creating an arsenal of instruments that look good, sound great, and deliver some foot stompin' fun!

In the past few years the market for electric guitar kits and parts has exploded. For every two enthusiasts, there are four opinions on how properly to fill woodgrain. In this book, Will Kelly cuts through all that noise and shows how, with a little patience and some inexpensive tools, the average person can turn a modest investment into a gig-worthy instrument and perhaps even a lifelong hobby. Kelly presents guitar-building in a progressive fashion, beginning with a simple Stratocaster-style kit with a bolt-on neck and continuing on to a "relic'd" Telecaster-style build, two Gibson-style set-neck models, and a custom double-neck mash-up. Because each build is more involved than the previous, the reader builds on his or her skill set and acquires only the tools necessary for the reader's level of interest. Kelly shows how to apply finishes, choose and install hardware, wire electronics, execute the final assembly, and set up the finished guitar for proper action and intonation.

The author of Cigar Box Guitars is back to share his obsession with these handmade treasures, in an amazing picture book that profiles 120 inspiring examples of homemade musical greatness.