This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.

This report provides key results of a three-year experimental and theoretical research and development effort performed under the auspices of the U.S. Nuclear Regulatory Commission. The goal of the R&D was to establish the validity of online calibration monitoring of process instrumentation channels in nuclear power plants. The author concludes that the normal outputs of instrument channels in nuclear plants can be monitored over a fuel cycle while the plant is operating and during startup and shutdown periods to verify the calibration of the instruments, thereby improving plant efficiency and safety, eliminating unnecessary calibrations, and reducing operations and maintenance costs.

The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.

The second edition of this text presents an overview of power generation and discusses the different types of equipment used in a steam thermal power generation unit. The book describes various conventional and non-conventional energy sources. It elaborates on the instrumentation and control of water-steam and fuel-air flue gas circuits along with optimization of combustion. The text also deals with the power plant management system including the combustion process, boiler efficiency calculation, and maintenance and safety aspects. In addition, the book explains Supervisory Control and Data Acquisition (SCADA) system as well as turbine monitoring and control. This book is designed for the undergraduate students of electronics and instrumentation engineering and electrical and electronics engineering. New To This Edition • A new chapter on Nuclear Power Plant Instrumentation is added, which elaborates how electricity is generated in a Nuclear Power Plant. Key Features • Includes numerous figures to clarify the concepts. • Gives a number of worked-out problems to help students enhance their learning skills. • Provides chapter-end exercises to enable students to test their understanding of the subject.

Accidents and natural disasters involving nuclear power plants such as Chernobyl, Three Mile Island, and the recent meltdown at Fukushima are rare, but their effects are devastating enough to warrant increased vigilance in addressing safety concerns. Nuclear Power Plant Instrumentation and Control Systems for Safety and Security evaluates the risks inherent to nuclear power and methods of preventing accidents through computer control systems and other such emerging technologies. Students and scholars as well as operators and designers will find useful insight into the latest security technologies with the potential to make the future of nuclear energy clean, safe, and reliable.