This book, edited by M. A. Ramos and contributed by several reputed physicists in the field, presents a timely review on low-temperature thermal and vibrational properties of glasses, and of disordered solids in general. In 1971, the seminal work of Zeller and Pohl was published, which triggered this relevant research field in condensed matter physics. Hence, this book also commemorates about 50 years of that highlight with a comprehensive, updated review.In brief, glasses (firstly genuine amorphous solids but later on followed by different disordered crystals) were found to universally exhibit low-temperature properties (specific heat, thermal conductivity, acoustic and dielectric attenuation, etc.) unexpectedly very similar among them — and very different from those of their crystalline counterparts.These universal 'anomalies' of glasses and other disordered solids remain very controversial topics in condensed matter physics. They have been addressed exhaustively in this book, through many updated experimental data, a survey of most relevant models and theories, as well as by computational simulations.

This book presents a consistent mathematical theory of the non-electronic physical properties of disordered and amorphous solids, starting from the atomic-level dynamics and leading to experimentally verifiable descriptions of macroscopic properties such as elastic and viscoelastic moduli, plasticity, phonons and vibrational spectra, and thermal properties. This theory begins with the assumption of the undeniable existence of an “amorphous lattice”, which allows one to relegate the theoretical uncertainties about the ultimate nature of the glass transition to a subsidiary role and thus take a more pragmatic approach towards the modelling of physical properties. The book introduces the reader not only to the subtle physical concepts underlying the dynamics, mechanics, and statistical physics of glasses and amorphous solids, but also to the essential mathematical and numerical methods that cannot be readily gleaned from specialized literature since they are spread out among many often technically demanding papers. These methods are presented in this book in such a way as to be sufficiently general, allowing for the mathematical or numerical description of novel physical phenomena observed in many different types of amorphous solids (including soft and granular systems), regardless of the atomistic details and particular chemistry of the material. This monograph is aimed at researchers and graduate-level students in physics, materials science, physical chemistry and engineering working in the areas of amorphous materials, soft matter and granular systems, statistical physics, continuum mechanics, plasticity, and solid mechanics. It is also particularly well suited to those working on molecular dynamics simulations, molecular coarse-grained simulations, as well as ab initio atomistic and DFT methods for solid-state and materials science.

Accompanyind CR-ROM conrtains The Encyclopedia of Materials Science and Technology on a web access disc.

The birth of this monograph is partly due to the persistent efforts of the General Editor, Dr. Klaus Timmerhaus, to persuade the authors that they encapsulate their forty or fifty years of struggle with the thermal properties of materials into a book before they either expired or became totally senile. We recognize his wisdom in wanting a monograph which includes the closely linked properties of heat capacity and thermal expansion, to which we have added a little 'cement' in the form of elastic moduli. There seems to be a dearth of practitioners in these areas, particularly among physics postgraduate students, sometimes temporarily alleviated when a new generation of exciting materials are found, be they heavy fermion compounds, high temperature superconductors, or fullerenes. And yet the needs of the space industry, telecommunications, energy conservation, astronomy, medical imaging, etc. , place demands for more data and understanding of these properties for all classes of materials - metals, polymers, glasses, ceramics, and mixtures thereof. There have been many useful books, including Specific Heats at Low Tempera tures by E. S. Raja Gopal (1966) in this Plenum Cryogenic Monograph Series, but few if any that covered these related topics in one book in a fashion designed to help the cryogenic engineer and cryophysicist. We hope that the introductory chapter will widen the horizons of many without a solid state background but with a general interest in physics and materials.

This book covers basic and advanced aspects in the field of Topological Matter. The chapters are based on the lectures presented during the Topological Matter School 2017. It provides graduate level content introducing the basic concepts of the field, including an introductory session on group theory and topological classification of matter. Different topological phases such as Weyls semi-metals, Majoranas fermions and topological superconductivity are also covered. A review chapter on the major experimental achievements in the field is also provided. The book is suitable not only for master, graduate and young postdoctoral researchers, but also to senior scientists who want to acquaint themselves with the subject.

This book provides a concise and inexpensive introduction for an undergraduate course in glass science and technology. The level of the book has deliberately been maintained at the introductory level to avoid confusion of the student by inclusion of more advanced material, and is unique in that its text is limited to the amount suitable for a one term course for students in materials science, ceramics or inorganic chemistry. The contents cover the fundamental topics of importance in glass science and technology, including glass formation, crystallization, phase separation and structure of glasses. Additional chapters discuss the most important properties of glasses, including discussion of physical, optical, electrical, chemical and mechanical properties. A final chapter provides an introduction to a number of methods used to form technical glasses, including glass sheet, bottles, insulation fibre, optical fibres and other common commercial products. In addition, the book contains discussion of the effects of phase separation and crystallization on the properties of glasses, which is neglected in other texts. Although intended primarily as a textbook, Introduction to Glass Science and Technology will also be invaluable to the engineer or scientist who desires more knowledge regarding the formation, properties and production of glass.

Table of Contents Table of Contents 1 Atoms, small, and large molecules 2 Basics of thermal analysis 3 Dynamics of chemical and phase changes 4 Thermal analysis tools 5 Structure and properties of materials 6 Single component materials 7 Multiple component materials App. A.1 Table of thermal properties of linear macromolecules and related small molecules - the ATHAS data bank App. A.2 Radiation scattering App. A.3 Derivation of the Rayleigh ratio App. A.4 Neural network predictions App. A.5 Legendre transformations, Maxwell relations, linking of entropy and probability, and derivation of (dS/dT) App. A.6 Boltzmann distribution, harmonic vibration, complex numbers, and normal modes App. A.7 Summary of the basic kinetics of chemical reactions App. A.8 The ITS 1990 and the Krypton-86 length standard App. A.9 Development of classical DTA to DSC App. A.10 Examples of DTA and DSC under extreme conditions App. A.11 Description of an online correction of the heat-flow rate App. A.12 Derivation of the heat-flow equations App. A.13 Description of sawtooth-modulation response App. A.14 An introduction to group theory, definitions of configurations and conformations, and a summary of rational and irrational numbers App. A.15 Summary of birefringence and polarizing microscopy App. A.16 Summary of X-ray diffraction and interference effects App. A.17 Optical analog of electron double diffraction to produce Moire patterns.