Low Power Circuit Design Using Advanced CMOS Technology is a summary of lectures from the first Advanced CMOS Technology Summer School (ACTS) 2017. The slides are selected from the handouts, while the text was edited according to the lecturers talk.ACTS is a joint activity supported by the IEEE Circuit and System Society (CASS) and the IEEE Solid-State Circuits Society (SSCS). The goal of the school is to provide society members as well researchers and engineers from industry the opportunity to learn about new emerging areas from leading experts in the field. ACTS is an example of high-level continuous education for junior engineers, teachers in academe, and students. ACTS was the results of a successful collaboration between societies, the local chapter leaders, and industry leaders. This summer school was the brainchild of Dr. Zhihua Wang, with strong support from volunteers from both the IEEE SSCS and CASS. In addition, the local companies, Synopsys China and Beijing IC Park, provided support.This first ACTS was held in the summer 2017 in Beijing. The lectures were given by academic researchers and industry experts, who presented each 6-hour long lectures on topics covering process technology, EDA skill, and circuit and layout design skills. The school was hosted and organized by the CASS Beijing Chapter, SSCS Beijing Chapter, and SSCS Tsinghua Student Chapter. The co-chairs of the first ACTS were Dr. Milin Zhang, Dr. Hanjun Jiang and Dr. Liyuan Liu. The first ACTS was a great success as illustrated by the many participants from all over China as well as by the publicity it has been received in various media outlets, including Xinhua News, one of the most popular news channels in China.

Low-Power Digital VLSI Design: Circuits and Systems addresses both process technologies and device modeling. Power dissipation in CMOS circuits, several practical circuit examples, and low-power techniques are discussed. Low-voltage issues for digital CMOS and BiCMOS circuits are emphasized. The book also provides an extensive study of advanced CMOS subsystem design. A low-power design methodology is presented with various power minimization techniques at the circuit, logic, architecture and algorithm levels. Features: Low-voltage CMOS device modeling, technology files, design rules Switching activity concept, low-power guidelines to engineering practice Pass-transistor logic families Power dissipation of I/O circuits Multi- and low-VT CMOS logic, static power reduction circuit techniques State of the art design of low-voltage BiCMOS and CMOS circuits Low-power techniques in CMOS SRAMS and DRAMS Low-power on-chip voltage down converter design Numerous advanced CMOS subsystems (e.g. adders, multipliers, data path, memories, regular structures, phase-locked loops) with several design options trading power, delay and area Low-power design methodology, power estimation techniques Power reduction techniques at the logic, architecture and algorithm levels More than 190 circuits explained at the transistor level.

Low Power Circuit Design Using Advanced CMOS Technology is a summary of lectures from the first Advanced CMOS Technology Summer School (ACTS) 2017. The slides are selected from the handouts, while the text was edited according to the lecturers talk.ACTS is a joint activity supported by the IEEE Circuit and System Society (CASS) and the IEEE Solid-State Circuits Society (SSCS). The goal of the school is to provide society members as well researchers and engineers from industry the opportunity to learn about new emerging areas from leading experts in the field. ACTS is an example of high-level continuous education for junior engineers, teachers in academe, and students. ACTS was the results of a successful collaboration between societies, the local chapter leaders, and industry leaders. This summer school was the brainchild of Dr. Zhihua Wang, with strong support from volunteers from both the IEEE SSCS and CASS. In addition, the local companies, Synopsys China and Beijing IC Park, provided support.This first ACTS was held in the summer 2017 in Beijing. The lectures were given by academic researchers and industry experts, who presented each 6-hour long lectures on topics covering process technology, EDA skill, and circuit and layout design skills. The school was hosted and organized by the CASS Beijing Chapter, SSCS Beijing Chapter, and SSCS Tsinghua Student Chapter. The co-chairs of the first ACTS were Dr. Milin Zhang, Dr. Hanjun Jiang and Dr. Liyuan Liu. The first ACTS was a great success as illustrated by the many participants from all over China as well as by the publicity it has been received in various media outlets, including Xinhua News, one of the most popular news channels in China.

Low-Power CMOS Wireless Communications: A Wideband CDMA System Design focuses on the issues behind the development of a high-bandwidth, silicon complementary metal-oxide silicon (CMOS) low-power transceiver system for mobile RF wireless data communications. In the design of any RF communications system, three distinct factors must be considered: the propagation environment in question, the multiplexing and modulation of user data streams, and the complexity of hardware required to implement the desired link. None of these can be allowed to dominate. Coupling between system design and implementation is the key to simultaneously achieving high bandwidth and low power and is emphasized throughout the book. The material presented in Low-Power CMOS Wireless Communications: A Wideband CDMA System Design is the result of broadband wireless systems research done at the University of California, Berkeley. The wireless development was motivated by a much larger collaborative effort known as the Infopad Project, which was centered on developing a mobile information terminal for multimedia content - a wireless `network computer'. The desire for mobility, combined with the need to support potentially hundreds of users simultaneously accessing full-motion digital video, demanded a wireless solution that was of far lower power and higher data rate than could be provided by existing systems. That solution is the topic of this book: a case study of not only wireless systems designs, but also the implementation of such a link, down to the analog and digital circuit level.

The power consumption of microprocessors is one of the most important challenges of high-performance chips and portable devices. In chapters drawn from Piguet's recently published Low-Power Electronics Design, Low-Power CMOS Circuits: Technology, Logic Design, and CAD Tools addresses the design of low-power circuitry in deep submicron technologies. It provides a focused reference for specialists involved in designing low-power circuitry, from transistors to logic gates. The book is organized into three broad sections for convenient access. The first examines the history of low-power electronics along with a look at emerging and possible future technologies. It also considers other technologies, such as nanotechnologies and optical chips, that may be useful in designing integrated circuits. The second part explains the techniques used to reduce power consumption at low levels. These include clock gating, leakage reduction, interconnecting and communication on chips, and adiabatic circuits. The final section discusses various CAD tools for designing low-power circuits. This section includes three chapters that demonstrate the tools and low-power design issues at three major companies that produce logic synthesizers. Providing detailed examinations contributed by leading experts, Low-Power CMOS Circuits: Technology, Logic Design, and CAD Tools supplies authoritative information on how to design and model for high performance with low power consumption in modern integrated circuits. It is a must-read for anyone designing modern computers or embedded systems.

Offers a summary of lectures from the first Advanced CMOS Technology Summer School (ACTS) 2017. The slides are selected from the handouts, while the text was edited according to the lecturers talk. Low Power Circuit Design Using Advanced CMOS Technology is a summary of lectures from the first Advanced CMOS Technology Summer School (ACTS) 2017. The slides are selected from the handouts, while the text was edited according to the lecturers talk. ACTS is a joint activity supported by the IEEE Circuit and System Society (CASS) and the IEEE Solid-State Circuits Society (SSCS). The goal of the school is to provide society members as well researchers and engineers from industry the opportunity to learn about new emerging areas from leading experts in the field. ACTS is an example of high-level continuous education for junior engineers, teachers in academe, and students. ACTS was the results of a successful collaboration between societies, the local chapter leaders, and industry leaders. This summer school was the brainchild of Dr. Zhihua Wang, with strong support from volunteers from both the IEEE SSCS and CASS. In addition, the local companies, Synopsys China and Beijing IC Park, provided support. This first ACTS was held in the summer 2017 in Beijing. The lectures were given by academic researchers and industry experts, who presented each 6-hour long lectures on topics covering process technology, EDA skill, and circuit and layout design skills. The school was hosted and organized by the CASS Beijing Chapter, SSCS Beijing Chapter, and SSCS Tsinghua Student Chapter. The co-chairs of the first ACTS were Dr. Milin Zhang, Dr. Hanjun Jiang and Dr. Liyuan Liu. The first ACTS was a great success as illustrated by the many participants from all over China as well as by the publicity it has been received in various media outlets, including Xinhua News, one of the most popular news channels in China.

This book documents electric power requirements for the dismounted soldier on future Army battlefields, describes advanced energy concepts, and provides an integrated assessment of technologies likely to affect limitations and needs in the future. It surveys technologies associated with both supply and demand including: energy sources and systems; low power electronics and design; communications, computers, displays, and sensors; and networks, protocols, and operations. Advanced concepts discussed are predicated on continued development by the Army of soldier systems similar to the Land Warrior system on which the committee bases its projections on energy use. Finally, the volume proposes twenty research objectives to achieve energy goals in the 2025 time frame.