Selected papers from the 2011 Low Impact Development Conference, held in Philadelphia, Pennsylvania, September 25-28, 2011. Sponsored by the Low Impact Development Committee of the Urban Water Resources Research Council of the Environmental and Water Resources Institute of ASCE As federal, state, and local governments realize that traditional approaches to stormwater management are not achieving the desired environmental protection goals, they are increasingly adopting low impact development (LID) technology as the preferred approach to stormwater management in land development and redevelopment. Low Impact Development Technology: Design Methods and Case Studies contains 22 papers that address a wide range of LID design applications and includes a number of practical case studies. Topics include: rain gardens and bioretention systems; green streets and hardscapes; green roofs; and watershed restoration. A companion volume, Low Impact Development Technology: Implementation and Economics, is also available. Both collections will be of interest to engineers, land planners, and government officials working on stormwater management and land use policy.

The manual introduces general audiences to designing landscapes for urban stormwater runoff -- a primary source of watershed pollution. The goal is to motivate awareness and implementation of LID in a wide cross-section of stakeholders, from property owners to municipal governments that regulate infrastructure development. The manual provides a holistic framework in which a novice homeowner and an experienced developer can each find an equally tranformative role to enact.

The rapid conversion of land to urban and suburban areas has profoundly altered how water flows during and following storm events, putting higher volumes of water and more pollutants into the nation's rivers, lakes, and estuaries. These changes have degraded water quality and habitat in virtually every urban stream system. The Clean Water Act regulatory framework for addressing sewage and industrial wastes is not well suited to the more difficult problem of stormwater discharges. This book calls for an entirely new permitting structure that would put authority and accountability for stormwater discharges at the municipal level. A number of additional actions, such as conserving natural areas, reducing hard surface cover (e.g., roads and parking lots), and retrofitting urban areas with features that hold and treat stormwater, are recommended.

Approaches to Water Sensitive Urban Design: Potential, Design, Ecological Health, Economics, Policies and Community Perceptions covers all aspects on the implementation of sustainable storm water systems for urban and suburban areas whether they are labeled as WSUD, Low Impact Development (LID), Green Infrastructure (GI), Sustainable Urban Drainage Systems (SUDS) or the Sponge City Concept. These systems and approaches are becoming an integral part of developing water sensitive cities as they are considered very capable solutions in addressing issues relating to urbanization, climate change and heat island impacts in dealing with storm water issues. The book is based on research conducted in Australia and around the world, bringing in perspectives in an ecosystems approach, a water quality approach, and a sewer based approach to stormwater, all of which are uniquely covered in this single resource.

This proceedings book includes a selection of refereed papers presented at the International Conference on Modern Mechanics and Applications (ICOMMA) 2020, which took place in Ho Chi Minh City, Vietnam, on December 2–4, 2020. The contributions highlight recent trends and applications in modern mechanics. Subjects covered include biological systems; damage, fracture, and failure; flow problems; multiscale multi-physics problems; composites and hybrid structures; optimization and inverse problems; lightweight structures; mechatronics; dynamics; numerical methods and intelligent computing; additive manufacturing; natural hazards modeling. The book is intended for academics, including graduate students and experienced researchers interested in recent trends in modern mechanics and application.