This IBM Redbooks publication gives a broad understanding of the new System i5 architecture as it applies to logically partitioned System i5 systems. This functionality is delivered through a new configuration and management interface called the Hardware Management Console (HMC). Reading this book will help you design your server partition scheme from scratch. We also discuss the requirements to create a solution to migrate from existing iSeries servers with and without logical partitions. This book will help you install, tailor, and configure logical partitions (LPARs) on System i5 systems. You will understand how to set up the server and HMC via the Guided Setup Wizard. We also cover the creation of multiple i5/OS partitions, where the OS could be IBM i5/OS, AIX, or Linux.

Logical Partitioning (LPAR) provides the significant capability to run multiple operating systems, each a partition on the same physical processor, memory, and I/O attachment configuration. LPAR is often discussed along with the concept of server consolidation. LPAR enables management across a single set of hardware and, when configured and managed correctly, can maximize efficient use of hardware resources all in a single place, often using resources in one partition when not needed by another partition. By its nature, LPAR is powerful, but, as the number and complexity of applications being run in each partition increases, can become complex to configure and to achieve anticipated performance expectations. This IBM Redbooks publication describes and provides examples of using the 2007 enhancements to the system planning and deployment tools and processes for planning, ordering, and deploying a partitioned environment on IBM System i and IBM System p configurations. The objective is to help you order and IBM deliver a hardware configuration and get that configuration up and running your planned partition configurations with good performance in as short a time as possible. This book and the tools and processes involved represent the next step in expediting this entire process, while still requiring sound knowledge of IBM System i and System p hardware processor and I/O capabilities for success.

The IBM® i operation system (formerly IBM i5/OS®) is considered one of the most secure systems in the industry. From the beginning, security was designed as an integral part of the system. The System i® platform provides a rich set of security features and services that pertain to the goals of authentication, authorization, integrity, confidentiality, and auditing. However, if an IBM Client does not know that a service, such as a virtual private network (VPN) or hardware cryptographic support, exists on the system, it will not use it. In addition, there are more and more security auditors and consultants who are in charge of implementing corporate security policies in an organization. In many cases, they are not familiar with the IBM i operating system, but must understand the security services that are available. This IBM Redbooks® publication guides you through the broad range of native security features that are available within IBM i Version and release level 6.1. This book is intended for security auditors and consultants, IBM System Specialists, Business Partners, and clients to help you answer first-level questions concerning the security features that are available under IBM. The focus in this publication is the integration of IBM 6.1 enhancements into the range of security facilities available within IBM i up through Version release level 6.1. IBM i 6.1 security enhancements include: - Extended IBM i password rules and closer affinity between normal user IBM i operating system user profiles and IBM service tools user profiles - Encrypted disk data within a user Auxiliary Storage Pool (ASP) - Tape data save and restore encryption under control of the Backup Recovery and Media Services for i5/OS (BRMS) product, 5761-BR1 - Networking security enhancements including additional control of Secure Sockets Layer (SSL) encryption rules and greatly expanded IP intrusion detection protection and actions. DB2® for i5/OS built-in column encryption expanded to include support of the Advanced Encryption Standard (AES) encryption algorithm to the already available Rivest Cipher 2 (RC2) and Triple DES (Data Encryption Standard) (TDES) encryption algorithms. The IBM i V5R4 level IBM Redbooks publication IBM System i Security Guide for IBM i5/OS Version 5 Release 4, SG24-6668, remains available.

This IBM Redbooks publication focuses on the technology, serviceability, and features that are used by the IBM eServer p5 and IBM System p5 servers, which allow you to make your server one of the most reliable and available parts of your IT infrastructure. This book explains how the server availability can be improved by: - Proper planning of the server environment and configuration - Understanding the role of the service processors and firmware components, and how they can be best configured and managed -Using high availability and redundancy features provided by the AIX 5L operating system and the Virtual IO server This book contains many detailed examples and step-by-step scenarios of usual server operation and maintenance tasks, such as the setup of redundant HMC and service processors, firmware upgrades, hot-addition of RIO drawers, or configuration of redundant Virtual IO servers. This book is intended for architects, specialists, and system administrators who are responsible for planning or developing an availability strategy for IBM System p servers.

This IBM® Redbooks® publication introduces a technical overview of the main new features, functions and enhancements available in IBM i 6.1 (formerly called i5/OS® V6R1). It gives a summary and brief explanation of new capabilities and what has changed in the operating system, and also discusses many of the licensed programs and application development tools associated with IBM i. Many other new and enhanced functions are described, such as virtualization of storage, security, JavaTM performance, improved performance with IBM System StorageTM devices, backup and recovery, including base IBM i, Backup, Recovery and Media Services (BRMS). The book introduces the PowerHATM product, IBM Systems Director-based system management and an easier Web enablement. The information provided in this book will be useful for customers, Business Partners, and IBM service professionals involved with planning, supporting, upgrading, and implementing IBM i 6.1 solutions.

This IBM® Redbooks® publication addresses performance tuning topics to help leverage the virtualization strengths of the POWER® platform to solve clients' system resource utilization challenges, and maximize system throughput and capacity. We examine the performance monitoring tools, utilities, documentation, and other resources available to help technical teams provide optimized business solutions and support for applications running on IBM POWER systems' virtualized environments. The book offers application performance examples deployed on IBM Power SystemsTM utilizing performance monitoring tools to leverage the comprehensive set of POWER virtualization features: Logical Partitions (LPARs), micro-partitioning, active memory sharing, workload partitions, and more. We provide a well-defined and documented performance tuning model in a POWER system virtualized environment to help you plan a foundation for scaling, capacity, and optimization . This book targets technical professionals (technical consultants, technical support staff, IT Architects, and IT Specialists) responsible for providing solutions and support on IBM POWER systems, including performance tuning.

The IBM® Hardware Management Console (HMC) provides to systems administrators a tool for planning, deploying, and managing IBM Power SystemsTM servers. This IBM Redbooks® publication is an extension of IBM Power Systems HMC Implementation and Usage Guide, SG24-7491 and also merges updated information from IBM Power Systems Hardware Management Console: Version 8 Release 8.1.0 Enhancements, SG24-8232. It explains the new features of IBM Power Systems Hardware Management Console Version V8.8.1.0 through V8.8.4.0. The major functions that the HMC provides are Power Systems server hardware management and virtualization (partition) management. Further information about virtualization management is in the following publications: IBM PowerVM Virtualization Managing and Monitoring, SG24-7590 IBM PowerVM Virtualization Introduction and Configuration, SG24-7940 IBM PowerVM Enhancements What is New in 2013, SG24-8198 IBM Power Systems SR-IOV: Technical Overview and Introduction, REDP-5065 The following features of HMC V8.8.1.0 through HMC V8.8.4.0 are described in this book: HMC V8.8.1.0 enhancements HMC V8.8.4.0 enhancements System and Partition Templates HMC and IBM PowerVM® Simplification Enhancement Manage Partition Enhancement Performance and Capacity Monitoring HMC V8.8.4.0 upgrade changes