This book gives a comprehensive introduction to the field of photovoltaic (PV) solar cells and modules. In thirteen chapters, it addresses a wide range of topics including the spectrum of light received by PV devices, the basic functioning of a solar cell, and the physical factors limiting the efficiency of solar cells. It places particular emphasis on crystalline silicon solar cells and modules, which constitute today more than 90 % of all modules sold worldwide. Describing in great detail both the manufacturing process and resulting module performance, the book also touches on the newest developments in this sector, such as Tunnel Oxide Passivated Contact (TOPCON) and heterojunction modules, while dedicating a major chapter to general questions of module design and fabrication. Overall, it presents the essential theoretical and practical concepts of PV solar cells and modules in an easy-to-understand manner and discusses current challenges facing the global research and development community.

The world of today must face up to two contradictory energy problems: on the one hand, there is the sharply growing consumer demand in countries such as China and India. On the other hand, natural resources are dwindling. Moreover, many of those countries which still possess substantial gas and oil supplies are politically unstable. As a result, renewable natural energy sources have received great attention. Among these, solar-cell technology is one of the most promising candidates. However, there still remains the problem of the manufacturing costs of such cells. Many attempts have been made to reduce the production costs of “conventional” solar cells (manufactured from monocrystalline silicon using diffusion methods) by instead using cheaper grades of silicon, and simpler pn-junction fabrication. That is the ‘hero’ of this book; the heterojunction solar cell.

This book provides a broad overview on the different aspects of solar energy, with a focus on photovoltaics, which is the technology that allows light energy to be converted into electric energy. Renewable energy sources have become increasingly popular in recent years, and solar is one of the most adaptable and attractive types – from solar farms to support the National Grid to roof panels/tiles used for solar thermal heating systems, and small solar garden lights. Written by Delft University researchers, Solar Energy uniquely covers both the physics of photovoltaic (PV) cells and the design of PV systems for real-life applications, from a concise history of solar cells components and location issues of current systems. The book is designed to make this complicated subject accessible to all, and is packed with fascinating graphs and charts, as well as useful exercises to cement the topics covered in each chapter. Solar Energy outlines the fundamental principles of semiconductor solar cells, as well as PV technology: crystalline silicon solar cells, thin-film cells, PV modules, and third-generation concepts. There is also background on PV systems, from simple stand-alone to complex systems connected to the grid. This is an invaluable reference for physics students, researchers, industrial engineers and designers working in solar energy generation, as well those with a general interest in renewable energy.

The early chapters comprehensively review the optical and transport properties of silicon. Light trapping is described in detail. Limits on the efficiency of silicon cells are discussed as well as material requirements necessary to approach these limits. The status of current approaches to passifying surfaces, contacts and bulk regions is reviewed. The final section of the book describes the most practical approaches to the fabrication of high-efficiency cells capable of meeting the efficiency targets for both concentrated and non-concentrated sunlight, including a discussion of design and processing approaches for non-crystalline silicon.

Surface passivation of silicon solar cells describes a technology for preventing electrons and holes to recombine prematurely with one another on the wafer surface. It increases the cell's energy conversion efficiencies and thus reduces the cost per kWh generated by a PV system.