This SAE Standard is limited to concise specifications promoting an adequate understanding between spring maker and spring user on all practical requirements in the finished spring. The basic concepts for the spring design and for many of the details have been fully addressed in HS-J788, SAE Information Report, Manual on Design and Application of Leaf Springs, which is available from SAE Headquarters. NOTE: For leaf springs made to metric units, see SAE J1123.

NOTEFor leaf springs made to metric units, see SAE J1123.This SAE Standard is limited to concise specifications promoting an adequate understanding between spring maker and spring user on all practical requirements in the finished spring. The basic concepts for the spring design and for many of the details have been fully addressed in HS-J788, SAE Information Report, Manual on Design and Application of Leaf Springs, which is available from SAE Headquarters. This document covers technology, products, or processes for which technical expertise no longer resides in the owning committee.

NOTEFor leaf springs made to customary U.S. units, see SAE J510.This SAE Standard is limited to concise specifications promoting an adequate understanding between spring maker and spring user on all practical requirements in the finished spring. The basic concepts for the spring design and for many of the details have been fully dealt with in HS-J788. This document covers technology, products, or processes for which technical expertise no longer resides in the owning committee.

NOTEFor leaf springs made to metric units, see SAE J1123.This SAE Standard is limited to concise specifications promoting an adequate understanding between spring maker and spring user on all practical requirements in the finished spring. The basic concepts for the spring design and for many of the details have been fully addressed in HS-J788, SAE Information Report, Manual on Design and Application of Leaf Springs, which is available from SAE Headquarters. The changes to this document were made to comply with the SAE Electronic Capture Guidelines. These include the addition of Section 2, References and the figures have been mentioned in consecutive order.

NOTEFor leaf springs made to customary U.S. units, see SAE J510.This SAE Standard is limited to concise specifications promoting an adequate understanding between spring maker and spring user on all practical requirements in the finished spring. The basic concepts for the spring design and for many of the details have been fully dealt with in HS-J788. Not applicable.