This monograph is devoted to the description of the physical fundamentals of laser refractography—a novel informational-measuring technique for the diagnostics of optically inhomogeneous media and flows, based on the idea of using spatially structured probe laser radiation in combination with its digital recording and c- puter techniques for the differential processing of refraction patterns. Considered are the physical fundamentals of this technique, actual optical schemes, methods of processing refraction patterns, and possible applications. This informational technique can be employed in such areas of science and technology as require remote nonperturbative monitoring of optical, thermophysical, chemical, aerohydrodynamic, and manufacturing processes. The monograph can also be recommended for students and postgraduates of - formational, laser, electro-optical, thermophysical, chemical, and other specialties. Laser refractography is a conceptually novel refraction method for the diagn- tics of inhomogeneous media, based on the idea of using spatially structured probe laser radiation in combination with its digital recording and computer techniques for the differential processing of refraction patterns.

This book is a comprehensive introduction to the quantitative analysis of dimensional instability in composite materials. It will aid in predicting deformations in a wide range of composite materials products and parts, under mechanical, thermophysical, and environmental stresses over time.

Different physical models for the Snoek-type relaxation in ternary systems (Fe-C-Me) are analyzed from the viewpoint of a distance of interatomic interaction taken into account: For non-saturated from the viewpoint of overlapping of interatomic interaction in b.c.c. alloys the physically sufficient and optimal for the computer simulation is the short-range model, which takes into account the interatomic interaction and the average amount of substitutional atoms in the first coordination shell, only. For high alloyed b.c.c. systems (i.e. with the overlapped interatomic interaction) the carbon atom undergoes an interaction of a few substitutional atoms simultaneously. That leads to the appearance of one broadened Snoek peak. Activation energy of such a peak is summed from the "elastic" and "chemical" interatomic interactions. Experimental results for alloys with b.c.c. solid solution structure and its computer simulations allow to introduce the new criterion for the high alloy state of monophase steels: the high alloyed state corresponds to the situation when substitutional atoms can not be considered any longer as the isolated atoms. From the viewpoint of mechanical spectroscopy this situation corresponds to the appearance of one broadened IF Snoek-type peak instead of two peaks existed for the steels with lower substitutional atom concentration.

This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

As with all of pharmaceutical production, the regulatory environment for the production of therapeutics has been changing as a direct result of the US FDA-initiated Quality by Design (QbD) guidelines and corresponding activities of the International Committee for Harmonization (ICH). Given the rapid growth in the biopharmaceutical area and the comp

This book considers some general laser-induced processes that are involved in laser-matter interactions. A brief review is presented about a very interesting application of laser beams in the fields of materials science: the growth of zinc oxide (ZnO) nanostructured films by Pulsed Laser Deposition (PLD). In addition, safe and precise cavity detection, especially of dangerous or inaccessible voids, is essential to safe production in a working mine. The advantages and disadvantages of laser detection systems are analysed, and a combination of laser scanning techniques and conventional survey methodology is proposed. Other chapters in this book present an overview on laser cladding, a discussion of the applications of structured laser beams in laser refractography technology, a review of some fundamentals of laser-induced breakdown spectroscopy (LIBS) and an analysis of laser forming of steel parts by means of diode lasers.