This appendix supports the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-13711/V1. This volume contains Appendix F. Appendix F is essentially a photocopy of the ORNL researchers' laboratory notebooks from the Environmental Sciences Division (ESD) and the Radioactive Materials Analytical Laboratory (RMAL).

These appendices support the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-1371 l/Vol. This volume contains Appendices C-E. Appendix C is a compilation of all recorded data and mathematical calculations made to interpret the data. For the Task 3 and Task 4 work, the spreadsheet column definitions are included immediately before the actual spreadsheet pages and are listed as ''Sample Calculations/Column Definitions'' in the table of contents. Appendix D includes the chronological order in which the experiments were conducted and the final project costs through October 1998. Appendix E is a compilation of the monthly progress reports submitted to INEEL during the course of the project.

This appendix supports the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-13711/V1. This volume contains Appendix G. Appendix G is a presentation of VOC chromatography data collected during the study. Information on the calibration curves and calibration checks used as well as the sample GC reports themselves are included here. The concentration values presented on the GC reports are calculation using the data from the applicable calibration curve and any necessary dilutions which were made.

The laboratory investigation was performed to evaluate the feasibility of utilizing in situ chemical oxidation for remediating the secondary source of groundwater contaminants at the Idaho National Engineering and Environmental Laboratory (INEEL) Test Area North (TAN) Site. The study involved trichloroethene (TCE) contaminated media (groundwater, soil, and sludge) from TAN. The effectiveness of the selected oxidant, potassium permanganate (KMn0(sub4)), was evaluated at multiple oxidant and contaminant concentrations. Experiments were performed to determine the oxidant demand of each medium and the rate of TCE oxidation. The experiments were performed under highly controlled conditions (gas-tight reactors, constant 12C temperature). Multiple parameter were monitored over time including MN04 and TCE concentrations and pH.

This volume provides comprehensive up-to-date descriptions of the principles and practices of in situ chemical oxidation (ISCO) for groundwater remediation based on a decade of intensive research, development, and demonstrations, and lessons learned from commercial field applications.

- Chapter 1: An overview of chemical oxidation including its development and application for in situ treatment of contaminated sites. The oxidation chemistry of Fenton's reagent, permanganate, and ozone are highlighted along with optional methods of oxidant delivery for in situ application. The results of lab-and field-scale applications are summarized.- Chapter 2: A description of the principles and processes of chemical oxidation using potassium or sodium permanganate for organic chemical degradation, including reaction stoichiometry, equilibria, and kinetics, as well as the effects of environmental factors.- Chapter 3: Information provided on the effects of permanganate on the behavior of metals.- Chapter 4: A discussion of the potential for permeability loss and other secondary effects during in situ oxidation using permanganate.- Chapter 5: A description of optional methods of oxidant delivery for in situ remediation.- Chapter 6: A description of a process for evaluation, design, and implementation of permanganate systems.- Chapter 7: A detailed description of five different applications of an in situ chemical oxidation using potassium or sodium permanganate.- Chapter 8: Highlights of the current status and future directions of this remediation technology.