This book is a full-color printed version of all the KiCad manuals which may be found for free on the kicad-pcb web site. A less-expensive grayscale version may be found via ISBN 9781680921274. iCad is an open source software suite for electronic design automation (EDA). It facilitates the design of schematics for electronic circuits and their conversion to PCBs (printed circuit board) design. KiCad was orginally developed by Jean-Pierre Charras, and features an integrated environment for schematic capture and PCB layout design.

KiCad is an open source software suite for electronic design automation (EDA). It facilitates the design of schematics for electronic circuits and their conversion to PCBs (printed circuit board) design. KiCad was orginally developed by Jean-Pierre Charras, and features an integrated environment for schematic capture and PCB layout design. This is a general Getting Started Guide. There are other books in this series for tools like cvpcb, pcbnew, gerbview and more.

A book with all of the KiCad manuals may be found via ISBN 9781680921281 (full-color, hardback) and via ISBN 9781680921274 (grayscale, paperback). KiCad is an open source software suite for electronic design automation (EDA). It facilitates the design of schematics for electronic circuits and their conversion to PCBs (printed circuit board) design. KiCad was orginally developed by Jean-Pierre Charras, and features an integrated environment for schematic capture and PCB layout design. Color images and text were converted to grayscale. This Reference Manual focuses on KiCad, the circuit board layout and footprint editor. This book is a printed version of the KiCad manual which may be found for free on the kicad-pcb.org web site.

This book is a printed version of all the KiCad manuals which may be found for free on the kicad-pcb web site. Color images and text were converted to grayscale. A full-color hardback version may be found via ISBN 9781680921281. KiCad is an open source software suite for electronic design automation (EDA). It facilitates the design of schematics for electronic circuits and their conversion to PCBs (printed circuit board) design. KiCad was orginally developed by Jean-Pierre Charras, and features an integrated environment for schematic capture and PCB layout design.

Modern cars are more computerized than ever. Infotainment and navigation systems, Wi-Fi, automatic software updates, and other innovations aim to make driving more convenient. But vehicle technologies haven’t kept pace with today’s more hostile security environment, leaving millions vulnerable to attack. The Car Hacker’s Handbook will give you a deeper understanding of the computer systems and embedded software in modern vehicles. It begins by examining vulnerabilities and providing detailed explanations of communications over the CAN bus and between devices and systems. Then, once you have an understanding of a vehicle’s communication network, you’ll learn how to intercept data and perform specific hacks to track vehicles, unlock doors, glitch engines, flood communication, and more. With a focus on low-cost, open source hacking tools such as Metasploit, Wireshark, Kayak, can-utils, and ChipWhisperer, The Car Hacker’s Handbook will show you how to: –Build an accurate threat model for your vehicle –Reverse engineer the CAN bus to fake engine signals –Exploit vulnerabilities in diagnostic and data-logging systems –Hack the ECU and other firmware and embedded systems –Feed exploits through infotainment and vehicle-to-vehicle communication systems –Override factory settings with performance-tuning techniques –Build physical and virtual test benches to try out exploits safely If you’re curious about automotive security and have the urge to hack a two-ton computer, make The Car Hacker’s Handbook your first stop.

This book will show you how to use your Arduino to control a variety of different robots, while providing step-by-step instructions on the entire robot building process. You'll learn Arduino basics as well as the characteristics of different types of motors used in robotics. You also discover controller methods and failsafe methods, and learn how to apply them to your project. The book starts with basic robots and moves into more complex projects, including a GPS-enabled robot, a robotic lawn mower, a fighting bot, and even a DIY Segway-clone. Introduction to the Arduino and other components needed for robotics Learn how to build motor controllers Build bots from simple line-following and bump-sensor bots to more complex robots that can mow your lawn, do battle, or even take you for a ride Please note: the print version of this title is black & white; the eBook is full color.