Self-induced blowing and suction were used in an attempt to reduce the separated region of a shock-boundary layer interaction. High pressure air was channeled from the downstream side of the separated bubble to the low pressure boundary layer upstream of the interaction. Data obtained from the configurations tested in this study showed no improvement over the plain wall separation case. (Author).

Shock wave-boundary-layer interaction (SBLI) is a fundamental phenomenon in gas dynamics that is observed in many practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLIs have the potential to pose serious problems in a flowfield; hence they often prove to be a critical - or even design limiting - issue for many aerospace applications. This is the first book devoted solely to a comprehensive, state-of-the-art explanation of this phenomenon. It includes a description of the basic fluid mechanics of SBLIs plus contributions from leading international experts who share their insight into their physics and the impact they have in practical flow situations. This book is for practitioners and graduate students in aerodynamics who wish to familiarize themselves with all aspects of SBLI flows. It is a valuable resource for specialists because it compiles experimental, computational and theoretical knowledge in one place.

This volume contains the description of an EC-sponsered program to study all relevant aspects of shock/ boundary-layer interaction control, the latter designed to improve aircraft performance at design (cruise) and off-design conditions. The work being presented includes a discussion of basic control experiments and the corresponding physical modeling, to account for shock control and a discussion of the airfoil experiments conducted for code validation and control assessment, in conjunction with the basic experiments and computations. The contents is comprised of a section giving a broad overview of the research carried out here and more detailed individual contributions by the participants in the research. Der Band enthält den Abschlußbericht eines von EU geförderten Projekts EUROSHOCK, das alle relevanten Aspekte der Kontrolle von Stoßfronten und Grenzschichten (wichtig z.B. für die Verbesserung der Flugeigenschaften von Fluzeugen) untersuchte. Neben einer ausführlichen Diskussion der grundlegenden Kontrollexperimente und der zugrundeliegenden Modellierung werden auch die Versuche an Tragflächen beschrieben, die zur Validierung von Modellrechnungen durchgeführt werden. Darüber hinaus enthält der Band auch die detaillierten Ergebnisse der Teilnehmer an dem Forschungsprogramm.