Laminar and turbulent boundary layer interactions with externally generated shock waves.

Shock Wave/Boundary Layer Interaction (SBLI) is a fundamental phenomenon in gasdynamics and frequently a defining feature in high speed aerodynamic flowfields. The interactions can be found in practical situations, ranging from transonic aircraft wings to hypersonic vehicles and engines. SBLI's have the potential to pose serious problems and is thus a critical issue for aerospace applications. This is the first book devoted solely to a comprehensive, state of the art explanation of the phenomenon with coverage of all flow regimes where SBLI's occur. The book includes contributions from leading international experts who share their insight into SBLI physics and the impact of these interactions on practical flow situations. This book is aimed at practitioners and graduate students in aerodynamics who wish to familiarise themselves with all aspects of SBLI flows. It is a valuable resource for the specialist because it gathers experimental, computational and theoretical knowledge in one place.

Tabulated data from a series of experimental studies of the interaction of a shock wave with a turbulent boundary layer in axisymmetric flow configurations is presented. The studies were conducted at the walls of circular wind tunnels and on the cylindrical centerbody of an annular flow channel. Detailed pitot pressure profiles and wall static pressure profiles upstream of, within and downstream of the interaction region are given. Results are presented for flows at nominal freestream Mach Numbers of 2, 3 and 4. For studies at the tunnel sidewalls, the shock waves were produced by conical shock generators mounted on the centerline of the wind tunnel at zero angle of attack. The annular ring generator was used to produce the shock wave at the centerbody of the annular flow channel. The effects of boundary layer bleed were examined in the investigation. Both bleed rate and bleed location were studied. Most of the bleed studies were conducted with bleed holes drilled normal to the wall surface but the effects of slot suction were also examined. A summary of the principal results and conclusions is given.