In the years since the development and subsequent success of Stone Matrix Asphalt (SMA), a plethora of articles have emerged, scattered throughout various publications. The time is right for a comprehensive resource that collects, examines, and organizes this information and makes it easily accessible. A compilation and distillation of the latest k

SMA is a gap-graded mix filled with a rich asphalt-fines mastic developed in Europe. In 1991 five states constructed trial sections to determine if satisfactory mixes could be produced in the United States with current materials and high rates of production. This report discusses Virginia's first section, placed in 1992 near Lynchburg. During construction, better equipment was necessary to control the amount of fines contained in SMA mixes. Lack of control in the mix gradation caused variability on the roadway and on routine mix tests conducted during construction. The mix containing the cellulose fiber, Arbocel, has rotted more at stop-lights than the mix containing the polymer, Vestoplast, or the high-stability control mix. However, all mixes continue to perform well. Laboratory creep tests and gyratory shear tests predicted that the control mix and Vestoplast mix would be more resistant to rutting and consolidation under traffic. This investigation and work in other states have improved the current Virginia specification for SMA. The gradation was coarsened, a stiffer asphalt cement was required, and plant equipment that can adequately handle the aggregates was used. With these changes, future installations will perform better than the current dense graded mixes.

Part 1: Summary of research results; Part 2: Mixture design method, construction guidelines, and quality control/quality assurance procedures

Use of Recycled Plastics in Eco-efficient Concrete looks at the processing of plastic waste, including techniques for separation, the production of plastic aggregates, the production of concrete with recycled plastic as an aggregate or binder, the fresh properties of concrete with plastic aggregates, the shrinkage of concrete with plastic aggregates, the mechanical properties of concrete with plastic aggregates, toughness of concrete with plastic aggregates, modulus of elasticity of concrete with plastic aggregates, durability of concrete with plastic aggregates, concrete plastic waste powder with enhanced neutron radiation shielding, and more, thus making it a valuable reference for academics and industrial researchers. - Describes the main types of recycled plastics that can be applied in concrete manufacturing - Presents, for the first time, state-of-the art knowledge on the properties of conventional concrete with recycled plastics - Discusses the technological challenges for concrete manufactures for mass production of recycled concrete from plastic waste