This volume in the SPIE Tutorial Text series presents a practical approach to optical testing, with emphasis on techniques, procedures, and instrumentation rather than mathematical analysis. The author provides the reader with a basic understanding of the measurements made and the tools used to make those measurements. Detailed information is given on how to measure and characterize imaging systems, perform optical bench measurements to determine first- and third-order properties of optical systems, set up and operate a Fizeau interferometer and evaluate fringe data, conduct beam diagnostics (such as wavefront sensing), and perform radiometric calibrations.

Introduction to Optical Metrology examines the theory and practice of various measurement methodologies utilizing the wave nature of light. The book begins by introducing the subject of optics, and then addresses the propagation of laser beams through free space and optical systems. After explaining how a Gaussian beam propagates, how to set up a collimator to get a collimated beam for experimentation, and how to detect and record optical signals, the text: Discusses interferometry, speckle metrology, moiré phenomenon, photoelasticity, and microscopy Describes the different principles used to measure the refractive indices of solids, liquids, and gases Presents methods for measuring curvature, focal length, angle, thickness, velocity, pressure, and length Details techniques for optical testing as well as for making fiber optic- and MEMS-based measurements Depicts a wave propagating in the positive z-direction by ei(ωt – kz), as opposed to ei(kz – ωt) Featuring exercise problems at the end of each chapter, Introduction to Optical Metrology provides an applied understanding of essential optical measurement concepts, techniques, and procedures.

This book connects the dots between geometrical optics, interference and diffraction, and aberrations to illustrate the development of an optical system. It focuses on initial layout, design and aberration analysis, fabrication, and, finally, testing and verification of the individual components and the system performance. It also covers more specialized topics such as fitting Zernike polynomials, representing aspheric surfaces with the Forbes Q polynomials, and testing with the Shack-Hartmann wavefront sensor. These topics are discussed in more detail than is found in other textbooks, and the techniques are developed to the point where readers can pursue their own analyses or modify to their particular situations.

This work covers spatial frequency, spread function, wave aberration, and transfer function - and how these concepts are related in an optical system, how they are measured and calculated, and how they may be useful.

Ten years have passed since the publication of the first edition of this classic text in April 2001. Considerable new material amounting to 100 pages has been added in this second edition. Each chapter now contains a Summary section at the end. The new material in Chapter 4 consists of a detailed comparison of Gaussian apodization with a corresponding beam, determination of the optimum value of the Gaussian radius relative to that of the pupil to yield maximum focal-point irradiance, detailed discussion of standard deviation, aberration balancing, and Strehl ratio for primary aberrations, derivation of the aberration-free and defocused OTF, discussion of an aberrated beam yielding higher axial irradiance in a certain defocused region than its aberration-free focal-point value, illustration that aberrated PSFs lose the advantage of Gaussian apodizaton in reducing the secondary maxima of a PSF, and a brief description of the characterization of the width of a multimode beam. In Chapter 5, the effect of random longitudinal defocus on a PSF is included. The coherence length of atmospheric turbulence is calculated for looking both up and down through the atmosphere. Also discussed are the angle of arrival of a light wave propagating through turbulence, and lucky imaging where better-quality short-exposure images are selected, aligned, and added to obtain a high-quality image.

The purpose of this third edition is to bring together in a single book descriptions of all tests carried out in the optical shop that are applicable to optical components and systems. This book is intended for the specialist as well as the non-specialist engaged in optical shop testing. There is currently a great deal of research being done in optical engineering. Making this new edition very timely.

This book provides the reader with the broad range of materials that were discussed in a series of short courses presented at Georgia Tech on the design, fabrication, and testing of diffractive optical elements (DOEs). Although there are not long derivations or detailed methods for specific engineering calculations, the reader should be familiar and comfortable with basic computational techniques. This text is not a 'cookbook' for producing DOEs, but it should provide readers with sufficient information to assess whether this technology would benefit their work, and to understand the requirements for using the concepts and techniques presented by the authors.