Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.

This book provides a comprehensive introduction to the metallographic study of ancient metals. Metallography is important both conceptually as a microstructural science and in terms of its application to the study of ancient and historic metals. Metallography is a well-established methodology for the characterization of the microstructure of metals, which continues to be significant today in quality control and characterization of metallic properties. Not only does the metallographic examination of ancient metals present its own challenges in terms of sample size and interpretation of evidence, but it must be integrated with archaeological data and cultural research in order to obtain the most meaningful results. Issues of authentication and the establishment of fakes and forgeries of metallic artefacts often involve metallographic evidence of both metal and patina or corrosion interface, as an essential component of such a study. The present volume sets out the basic features of relevant metallic systems, enhanced with a series of examples of typical microstructural types, with illustrative case studies and examples throughout the text derived from studies undertaken by the two authors. This book provides a comprehensive presentation of metallography for archaeologists, archaeometallurgists, conservators, conservation scientists and metallurgists of modern materials.

David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.

Pergamon Series of Monographs in Laboratory Techniques, Volume 3: An Introduction to Metallurgical Laboratory Techniques covers improved methods and techniques in metallurgy relating to the practical aspects of laboratory work, by experimentation, practice and experience. The book discusses metallography, high temperature, heat treatment, and testing of materials. The text also describes vacuum techniques, powder metallurgy, and joining of metals. Physical metallurgists and students taking related courses will find the book invaluable.

Introduction to the Physical Metallurgy of Welding deals primarily with the welding of steels, which reflects the larger volume of literature on this material; however, many of the principles discussed can also be applied to other alloys. The book is divided into four chapters, in which the middle two deal with the microstructure and properties of the welded joint, such as the weld metal and the heat-affected zone. The first chapter is designed to provide a wider introduction to the many process variables of fusion welding, particularly those that may influence microstructure and properties, while the final chapter is concerned with cracking and fracture in welds. A comprehensive case study of the Alexander Kielland North Sea accommodation platform disaster is also discussed at the end. The text is written for undergraduate or postgraduate courses in departments of metallurgy, materials science, or engineering materials. The book will also serve as a useful revision text for engineers concerned with welding problems in industry.

This book provides a solid overview of the important metallurgical concepts related to the microstructures of irons and steels, and it provides detailed guidelines for the proper metallographic techniques used to reveal, capture, and understand microstructures. This book provides clearly written explanations of important concepts, and step-by-step instructions for equipment selection and use, microscopy techniques, specimen preparation, and etching. Dozens of concise and helpful “metallographic tips” are included in the chapters on laboratory practices and specimen preparation. The book features over 500 representative microstructures, with discussions of how the structures can be altered by heat treatment and other means. A handy index to these images is provided, so the book can also be used as an atlas of iron and steel microstructures.