Authorized Self-Study Guide Implementing Cisco Unified Communications Manager Part 2 (CIPT2) Foundation learning for CIPT2 exam 642-456 Chris Olsen Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), is a Cisco®-authorized, self-paced learning tool for CCVP® foundation learning. This book provides you with the knowledge needed to install and configure a Cisco Unified Communications Manager solution in a multisite environment. By reading this book, you will gain a thorough understanding of how to apply a dial plan for a multisite environment, configure survivability for remote sites during WAN failure, implement solutions to reduce bandwidth requirements in the IP WAN, enable Call Admission Control (CAC) and automated alternate routing (AAR), and implement device mobility, extension mobility, Cisco Unified Mobility, and voice security. This book focuses on Cisco Unified CallManager Release 6.0, the call routing and signaling component for the Cisco Unified Communications solution. It also includes H.323 and Media Gateway Control Protocol (MGCP) gateway implementation, the use of a Cisco Unified Border Element, and configuration of Survivable Remote Site Telephony (SRST), different mobility features, and voice security. Whether you are preparing for CCVP certification or simply want to gain a better understanding of deploying Cisco Unified Communications Manager in a multisite environment, you will benefit from the foundation information presented in this book. Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), is part of a recommended learning path from Cisco that includes simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. To find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining. Chris Olsen is the president and founder of System Architects, Inc., a training and consulting firm specializing in Cisco, Microsoft, and Novell networking; IP telephony; and information technologies. Chris has been teaching and consulting in the networking arena for more than 15 years. He currently holds his CCNA®, CCDA®, CCNP®, and CCVP certifications, as well as various Microsoft certifications. Identify multisite issues and deployment solutions Implement multisite connections Apply dial plans for multisite deployments Examine remote site redundancy options Deploy Cisco Unified Communications Manager Expressin SRST mode Implement bandwidth management, call admission control (CAC), and call applications on Cisco IOS® gateways Configure device, extension mobility, and Cisco unified mobility Understand cryptographic fundamentals and PKI Implement security in Cisco Unified Communications Manager This volume is in the Certification Self-Study Series offered by Cisco Press®. Books in this series provide officially developed self-study solutions to help networking professionals understand technology implementations and prepare for the Cisco Career Certifications examinations. Category: Cisco Unified Communications Manager 6.0 Covers: CIPT2 Exam 642-456

Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), Second Edition is a Cisco®-authorized, self-paced learning tool for CCNP Voice® foundation learning. This book provides you with the knowledge needed to install and configure a Cisco Unified Communications Manager solution in a multisite environment. By reading this book, you will gain a thorough understanding of how to apply a dial plan for a multisite environment, configure survivability for remote sites during WAN failure, and implement solutions to reduce bandwidth requirements in the IP WAN. This book focuses on Cisco Unified Communications Manager (CUCM) Release 8.x, the call routing and signaling component for the Cisco Unified Communications solution. The book has been fully updated and includes new coverage of topics such as Service Advertisement Framework (SAF), and Call Control Discovery (CCD). Whether you are preparing for CCNP Voice certification or simply want to gain a better understanding of deploying Cisco Unified Communications Manager in a multisite environment, you will benefit from the foundation information presented in this book. Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), Second Edition, is part of a recommended learning path from Cisco that includes simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. To find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining. Chris Olsen, CCVP, and CCNP, along with numerous other Cisco voice specializations, Microsoft, VMware, and Novell certifications, has been an independent IT and telephony consultant, author, and technical editor for more than 15 years. He has been a technical trainer for more than 19 years and has taught more than 60 different courses in Cisco, Microsoft, VMware, and Novell. For the last seven years he has specialized in Cisco, and recently Microsoft Unified Communications along with VMware virtualization and Cisco data center technologies. He has done a wide array of IT and telephony consulting for many different companies. · Identify multisite issues and deployment solutions · Implement multisite connections · Apply dial plans for multisite deployments · Examine remote site redundancy options · Implement Survivable Remote Site Telephony (SRST) and Media Gateway Control Protocol (MGCP) Fallback · Implement CUCM Express in SRST mode · Implement bandwidth management and call admission control (CAC) · Configure device and extension mobility · Apply Service Advertisement Framework (SAF) and Call Control Discovery (CCD) This volume is in the Foundation Learning Guide Series offered by Cisco Press®. These guides are developed together with Cisco as the only authorized, self-paced learning tools that help networking professionals build their understanding of networking concepts and prepare for Cisco certification exams.

Authorized Self-Study Guide Implementing Cisco Unified Communications Manager Part 2 (CIPT2) Foundation learning for CIPT2 exam 642-456 Chris Olsen Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), is a Cisco®-authorized, self-paced learning tool for CCVP® foundation learning. This book provides you with the knowledge needed to install and configure a Cisco Unified Communications Manager solution in a multisite environment. By reading this book, you will gain a thorough understanding of how to apply a dial plan for a multisite environment, configure survivability for remote sites during WAN failure, implement solutions to reduce bandwidth requirements in the IP WAN, enable Call Admission Control (CAC) and automated alternate routing (AAR), and implement device mobility, extension mobility, Cisco Unified Mobility, and voice security. This book focuses on Cisco Unified CallManager Release 6.0, the call routing and signaling component for the Cisco Unified Communications solution. It also includes H.323 and Media Gateway Control Protocol (MGCP) gateway implementation, the use of a Cisco Unified Border Element, and configuration of Survivable Remote Site Telephony (SRST), different mobility features, and voice security. Whether you are preparing for CCVP certification or simply want to gain a better understanding of deploying Cisco Unified Communications Manager in a multisite environment, you will benefit from the foundation information presented in this book. Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), is part of a recommended learning path from Cisco that includes simulation and hands-on training from authorized Cisco Learning Partners and self-study products from Cisco Press. To find out more about instructor-led training, e-learning, and hands-on instruction offered by authorized Cisco Learning Partners worldwide, please visit www.cisco.com/go/authorizedtraining. Chris Olsen is the president and founder of System Architects, Inc., a training and consulting firm specializing in Cisco, Microsoft, and Novell networking; IP telephony; and information technologies. Chris has been teaching and consulting in the networking arena for more than 15 years. He currently holds his CCNA®, CCDA®, CCNP®, and CCVP certifications, as well as various Microsoft certifications. Identify multisite issues and deployment solutions Implement multisite connections Apply dial plans for multisite deployments Examine remote site redundancy options Deploy Cisco Unified Communications Manager Expressin SRST mode Implement bandwidth management, call admission control (CAC), and call applications on Cisco IOS® gateways Configure device, extension mobility, and Cisco unified mobility Understand cryptographic fundamentals and PKI Implement security in Cisco Unified Communications Manager This volume is in the Certification Self-Study Series offered by Cisco Press®. Books in this series provide officially developed self-study solutions to help networking professionals understand technology implementations and prepare for the Cisco Career Certifications examinations. Category: Cisco Unified Communications Manager 6.0 Covers: CIPT2 Exam 642-456

This is the eBook version of the printed book. If the print book includes a CD-ROM, this content is not included within the eBook version. Implementing Cisco Unified Communications Manager, Part 2 (CIPT2), is a Cisco®-authorized, self-paced learning tool for CCVP® foundation learning. This book provides you with the knowledge needed to install and configure a Cisco Unified Communications Manager solution in a multisite environment. By reading this book, you will gain a thorough understanding of how to apply a dial plan for a multisite environment, configure survivability for remote sites du.