Packed with plumbing isometrics and helpful illustrations, this guide makes clear the code requirements for installing materials for plumbing and gas systems. Includes code tables for pipe sizing and fixture units, and code requirements for just about all areas of plumbing, from water supply and vents to sanitary drainage systems. Covers the principles and terminology of the code, how the various systems work and are regulated, and code-compliance issues you'll likely encounter on the job.

Customize your 2018 INTERNATIONAL FUEL GAS CODE Soft Cover book with updated, easy-to-use TURBO TABS. These handy tabs will highlight the most frequently referenced sections of the latest version of the IFGC. They have been strategically designed by industry experts so that users can quickly and efficiently access the information they need, when they need it.

Addresses the design and installation of fuel gas systems and gas fired appliances through prescriptive and performance requirements. Key changes in the 2021 IFGC include: The termination of concealed condensate piping requires marking to indicate if it is the primary drain or the secondary drain. Press-connect joints are acceptable for high pressure (over 5 psi) applications indoors. Commercial cooking appliances are not allowed within dwelling units.

An organized, structured approach to the 2018 INTERNATIONAL PLUMBING CODE Loose leaf Version, these TURBO TABS will help you target the specific information you need, when you need it. Packaged as pre-printed, full-page inserts that categorize the IPC into its most frequently referenced sections, the tabs are both handy and easy to use. They were created by leading industry experts who set out to develop a tool that would prove valuable to users in or entering the field.

This second edition is an in-depth illustrated manual by Master Plumber Bob Scott that continues to examine various venting methods and includes discussion and application of venting methods in the International Plumbing Code(R) (IPC(R)) and International Residential Code(R) (IRC(R)). This heavily illustrated guide shows correct and incorrect examples of common venting, horizontal and vertical wet-venting, combination waste and vent, circuit venting, single stack venting and more based on the criteria established in chapter 9 of the 2021 IPC and Chapter 31 of the 2021 IRC, as well as the 2015 and 2018 editions of the IPC and IRC. It discusses the nuances of each method in detail and gives many examples of how and where to use each method. A must have guide for any designer, installer, plan examiner, inspector or plumbing professional.

Provides an all-in-one guide to the most commonly cited code violations encountered by building inspectors.