In simulation tests of dynamic states of the power system (PS), the database of parameters of mathematical models of generating units is most commonly used. In many cases, the parameter values are burdened with large errors. Consequently, the results obtained are not reliable and do not allow drawing true conclusions. This monograph presents the developed methods and tools supporting the process of measurement determination of reliable values of parameters of mathematical models of synchronous generators and excitation systems. Special measurement tests are the basis for determining the parameters. The tests can be carried out in conditions of normal operation of generating units, in which electrical machines operate in the state of saturation of magnetic cores, and voltage regulators can reach limits. This book is intended for specialists in power engineering as well as students of faculties of electrical engineering interested in issues of PS transient states.

The third edition of the landmark book on power system stability and control, revised and updated with new material The revised third edition of Power System Control and Stability continues to offer a comprehensive text on the fundamental principles and concepts of power system stability and control as well as new material on the latest developments in the field. The third edition offers a revised overview of power system stability and a section that explores the industry convention of q axis leading d axis in modeling of synchronous machines. In addition, the third edition focuses on simulations that utilize digital computers and commercial simulation tools, it offers an introduction to the concepts of the stability analysis of linear systems together with a detailed formulation of the system state matrix. The authors also include a revised chapter that explores both implicit and explicit integration methods for transient stability. Power System Control and Stability offers an in-depth review of essential topics and: Discusses topics of contemporary and future relevance in terms of modeling, analysis and control Maintains the approach, style, and analytical rigor of the two original editions Addresses both power system planning and operational issues in power system control and stability Includes updated information and new chapters on modeling and simulation of round-rotor synchronous machine model, excitation control, renewable energy resources such as wind turbine generators and solar photovoltaics, load modeling, transient voltage instability, modeling and representation of three widely used FACTS devices in the bulk transmission network, and the modeling and representation of appropriate protection functions in transient stability studies Contains a set of challenging problems at the end of each chapter Written for graduate students in electric power and professional power system engineers, Power System Control and Stability offers an invaluable reference to basic principles and incorporates the most recent techniques and methods into projects.

Provides students with an understanding of the modeling and practice in power system stability analysis and control design, as well as the computational tools used by commercial vendors Bringing together wind, FACTS, HVDC, and several other modern elements, this book gives readers everything they need to know about power systems. It makes learning complex power system concepts, models, and dynamics simpler and more efficient while providing modern viewpoints of power system analysis. Power System Modeling, Computation, and Control provides students with a new and detailed analysis of voltage stability; a simple example illustrating the BCU method of transient stability analysis; and one of only a few derivations of the transient synchronous machine model. It offers a discussion on reactive power consumption of induction motors during start-up to illustrate the low-voltage phenomenon observed in urban load centers. Damping controller designs using power system stabilizer, HVDC systems, static var compensator, and thyristor-controlled series compensation are also examined. In addition, there are chapters covering flexible AC transmission Systems (FACTS)—including both thyristor and voltage-sourced converter technology—and wind turbine generation and modeling. Simplifies the learning of complex power system concepts, models, and dynamics Provides chapters on power flow solution, voltage stability, simulation methods, transient stability, small signal stability, synchronous machine models (steady-state and dynamic models), excitation systems, and power system stabilizer design Includes advanced analysis of voltage stability, voltage recovery during motor starts, FACTS and their operation, damping control design using various control equipment, wind turbine models, and control Contains numerous examples, tables, figures of block diagrams, MATLAB plots, and problems involving real systems Written by experienced educators whose previous books and papers are used extensively by the international scientific community Power System Modeling, Computation, and Control is an ideal textbook for graduate students of the subject, as well as for power system engineers and control design professionals.

For a one-semester senior or beginning graduate level course in power system dynamics. This text begins with the fundamental laws for basic devices and systems in a mathematical modeling context. It includes systematic derivations of standard synchronous machine models with their fundamental controls. These individual models are interconnected for system analysis and simulation. Singular perturbation is used to derive and explain reduced-order models.

This book gathers papers presented during the 4th International Conference on Electrical Engineering and Control Applications. It covers new control system models, troubleshooting tips and complex system requirements, such as increased speed, precision and remote capabilities. Additionally, the papers discuss not only the engineering aspects of signal processing and various practical issues in the broad field of information transmission, but also novel technologies for communication networks and modern antenna design. This book is intended for researchers, engineers and advanced postgraduate students in the fields of control and electrical engineering, computer science and signal processing, as well as mechanical and chemical engineering.

This book aims to provide insights on new trends in power systems operation and control and to present, in detail, analysis methods of the power system behavior (mainly its dynamics) as well as the mathematical models for the main components of power plants and the control systems implemented in dispatch centers. Particularly, evaluation methods for rotor angle stability and voltage stability as well as control mechanism of the frequency and voltage are described. Illustrative examples and graphical representations help readers across many disciplines acquire ample knowledge on the respective subjects.