This IBM® RedpaperTM publication provides a description and reference information for the IBM Assist On-site (AOS) software. It is intended for clients who want the benefit of the AOS advanced features, such as port forwarding, which allows an authorized IBM Support Service Representative (IBM SSR) to access a client's enabled storage device to diagnose and troubleshoot efficiently the device.

Businesses of all sizes are faced with the challenge of managing huge volumes of data that are becoming increasingly valuable. But storing this data can be costly, and extracting value from the data is becoming more and more difficult. IT organizations have limited resources and cannot afford to make investment mistakes. The IBM® Storwize® V3500 system provides a smarter solution that is affordable, simple, and efficient, which enables businesses to overcome their storage challenges. IBM Storwize V3500 is the most recent addition to the IBM Storwize family of disk systems. It delivers easy-to-use, entry-level configurations that are specifically designed to meet the modest budgets of small and medium-sized businesses. IBM Storwize V3500 features the following highlights: - Consolidate and share data with low cost iSCSI storage networking. - Deploy storage in minutes and perform storage management tasks quickly and easily through a breakthrough graphical user interface. - Experience peace of mind with proven IBM Storwize family high-availability data protection with snapshot technology and IBM warranty support. - Optimize efficiency by allocating only the amount of disk space needed at the time it is required with high performance, thin-provisioning capabilities.

This IBM® Redbooks® Product Guide publication describes the IBM FlashSystem® 5200 solution, which is a next-generation IBM FlashSystem control enclosure. It is an NVMe end-to-end platform that is targeted at the entry and midrange market and delivers the full capabilities of IBM FlashCore® technology. It also provides a rich set of software-defined storage (SDS) features that are delivered by IBM Spectrum® Virtualize, including the following features: Data reduction and deduplication Dynamic tiering Thin provisioning Snapshots Cloning Replication Data copy services Transparent Cloud Tiering IBM HyperSwap® including 3-site replication for high availability (HA) Scale-out and scale-up configurations further enhance capacity and throughput for better availability. The IBM FlashSystem 5200 is a high-performance storage solution that is based on a revolutionary 1U form factor. It consists of 12 NVMe Flash Devices in a 1U storage enclosure drawer with full redundant canister components and no single point of failure. It is designed for businesses of all sizes, including small, remote, branch offices and regional clients. It is a smarter, self-optimizing solution that requires less management, which enables organizations to overcome their storage challenges. Flash has come of age and price point reductions mean that lower parts of the storage market are seeing the value of moving over to flash and NVMe--based solutions. The IBM FlashSystem 5200 advances this transition by providing incredibly dense tiers of flash in a more affordable package. With the benefit of IBM FlashCore Module compression and new QLC flash-based technology becoming available, a compelling argument exists to move away from Nearline SAS storage and on to NVMe. With the release of IBM FlashSystem 5200 Software V8.4, extra functions and features are available, including support for new Distributed RAID1 (DRAID1) features, GUI enhancements, Redirect-on-write for Data Reduction Pool (DRP) snapshots, and 3-site replication capabilities. This book is aimed at pre-sales and post-sales technical support and marketing and storage administrators.

The superabundance of data that is created by today's businesses is making storage a strategic investment priority for companies of all sizes. As storage takes precedence, the following major initiatives emerge: Flatten and converge your network: IBM® takes an open, standards-based approach to implement the latest advances in the flat, converged data center network designs of today. IBM Storage solutions enable clients to deploy a high-speed, low-latency Unified Fabric Architecture. Optimize and automate virtualization: Advanced virtualization awareness reduces the cost and complexity of deploying physical and virtual data center infrastructure. Simplify management: IBM data center networks are easy to deploy, maintain, scale, and virtualize, delivering the foundation of consolidated operations for dynamic infrastructure management. Storage is no longer an afterthought. Too much is at stake. Companies are searching for more ways to efficiently manage expanding volumes of data, and to make that data accessible throughout the enterprise. This demand is propelling the move of storage into the network. Also, the increasing complexity of managing large numbers of storage devices and vast amounts of data is driving greater business value into software and services. With current estimates of the amount of data to be managed and made available increasing at 60% each year, this outlook is where a storage area network (SAN) enters the arena. SANs are the leading storage infrastructure for the global economy of today. SANs offer simplified storage management, scalability, flexibility, and availability; and improved data access, movement, and backup. Welcome to the cognitive era. The smarter data center with the improved economics of IT can be achieved by connecting servers and storage with a high-speed and intelligent network fabric. A smarter data center that hosts IBM Storage solutions can provide an environment that is smarter, faster, greener, open, and easy to manage. This IBM® Redbooks® publication provides an introduction to SAN and Ethernet networking, and how these networks help to achieve a smarter data center. This book is intended for people who are not very familiar with IT, or who are just starting out in the IT world.

This IBM® Redbooks® publication describes the concepts, architecture, and implementation of the IBM System Storage® DS8700 storage subsystem. This book has reference information that will help you plan for, install, and configure the DS8700 and also discusses the architecture and components. The DS8700 is the most advanced model in the IBM System Storage DS8000® series. It includes IBM POWER6®-based controllers, with a dual 2-way or dual 4-way processor complex implementation. Its extended connectivity, with up to 128 Fibre Channel/FICON® ports for host connections, make it suitable for multiple server environments in both open systems and IBM System z® environments. If desired, the DS8700 can be integrated in an LDAP infrastructure. The DS8700 supports thin provisioning. Depending on your specific needs, the DS8700 storage subsystem can be equipped with SATA drives, FC drives, and Solid® State Drives (SSDs). The DS8700 can now automatically optimize the use of SSD drives through its no charge Easy Tier feature. The DS8700 also supports Full Disk Encryption (FDE) feature. Its switched Fibre Channel architecture, dual processor complex implementation, high availability design, and the advanced Point-in-Time Copy and Remote Mirror and Copy functions that incorporates make the DS8700 storage subsystem suitable for mission-critical business functions.

This IBM Redpaper publication presents and positions the DS8910F Model 993 storage system. This modular system can be integrated into a 16U contiguous space of an IBM z15TM model T02 or IBM z14® Model ZR1 with Feature Code 0937 and IBM LinuxONE III model LT2 or LinuxONE Rockhopper II model LR1 with Feature Code 0938. The DS8910F Model 993 allows you to take advantage of the performance boost of all-flash systems and advanced features while limiting data center footprint and power infrastructure requirements.

This IBM® Redbooks® publication describes the concepts, architecture, and implementation of the IBM Storage DS8900F family. The book provides reference information to assist readers who need to plan for, install, and configure the DS8900F systems. This edition applies to DS8900F systems with IBM Storage DS8000® Licensed Machine Code (LMC) 7.9.30 (bundle version 89.30.xx.x), referred to as Release 9.3. The DS8900F systems are all-flash exclusively, and they are offered as three classes: DS8980F: Analytic Class: The DS8980F Analytic Class offers best performance for organizations that want to expand their workload possibilities to artificial intelligence (AI), Business Intelligence (BI), and machine learning (ML). IBM DS8950F: Agility Class: The Agility Class consolidates all your mission-critical workloads for IBM Z®, IBM LinuxONE, IBM Power, and distributed environments under a single all-flash storage solution. IBM DS8910F: Flexibility Class: The Flexibility Class reduces complexity while addressing various workloads at the lowest DS8900F family entry cost. The DS8900F architecture relies on powerful IBM POWER9TM processor-based servers that manage the cache to streamline disk input/output (I/O), which maximizes performance and throughput. These capabilities are further enhanced by High-Performance Flash Enclosures (HPFE) Gen2. Like its predecessors, the DS8900F supports advanced disaster recovery (DR) solutions, business continuity solutions, and thin provisioning.