This book wxplains the fundamentals of reservoir engineering and their practical application in conducting a comprehensive field study.Two new chapters have been included in this second edition: chapter 14 and 15.

The cost-effective recovery of oil and gas depends on an understanding of both reservoir and petroleum engineering, yet these are, increasingly, becoming self-contained fields. Hydrocarbon Reservoir and Well Performance brings the two subjects together for the first time and, by explaining both fundamental concepts and actual practice, helps in understanding their interrelation.

This book describe Reservoir fluid terminology such; fluid, density of hydrocarbon fluids, solution gas, critical saturation, the bubble point pressure, the gas cap, associated gas and non-associated gas, viscosity, condensate, formation volume factor, gas oil ratio (GOR), The recovery factor (RF) in common.This book also describe generally about the Hydrocarbon Classifications such; Bitumen, Tar or Heavy Oil, Shrinkage Oils or Black Oils, High Shrinkage Oils or Volatile Oil, retrograde condensate, wet gas, dry gas. Then describe hydrocarbon recovery, sources of natural energy, enhanced oil recovery methods, and hydrocarbon reserves. Where the source of natural energy in reservoir comprises; solution gas, water drive, gas cap drive, gravity drainage drive, compaction drive, and combination drives. While enhanced oil recovery methods comprises Water Flooding, Thermal Recovery, Miscible Flooding, Mobility Ratio Flooding, and Microbial Flooding.

This book provides a clear and basic understanding of the concept of reservoir engineering to professionals and students in the oil and gas industry. The content contains detailed explanations of key theoretic and mathematical concepts and provides readers with the logical ability to approach the various challenges encountered in daily reservoir/field operations for effective reservoir management. Chapters are fully illustrated and contain numerous calculations involving the estimation of hydrocarbon volume in-place, current and abandonment reserves, aquifer models and properties for a particular reservoir/field, the type of energy in the system and evaluation of the strength of the aquifer if present. The book is written in oil field units with detailed solved examples and exercises to enhance practical application. It is useful as a professional reference and for students who are taking applied and advanced reservoir engineering courses in reservoir simulation, enhanced oil recovery and well test analysis.

Written by four leading experts, this edition thoroughly introduces today's modern principles of petroleum production systems development and operation, considering the combined behaviour of reservoirs, surface equipment, pipeline systems, and storage facilities. The authors address key issues including artificial lift, well diagnosis, matrix stimulation, hydraulic fracturing and sand control. They show how to optimise systems for diverse production schedules using queuing theory, as well as linear and dynamic programming. Throughout, they provide both best practices and rationales, fully illuminating the exploitation of unconventional oil and gas reservoirs. Updates include: Extensive new coverage of hydraulic fracturing, including high permeability fracturing New sand and water management techniques * An all-new chapter on Production Analysis New coverage of digital reservoirs and self-learning techniques New skin correlations and HW flow techniques

This reservoir-engineering textbook is a contemporary analysis of primary recovery. It covers rock and fluid properties, reservoir energies, surface separation, laboratory PVT methods, material balance, fluid flow, well deliverability, water influx, reservoir performance, and decline-curve analysis. Using an unified approach, the text includes the full range of reservoir fluids: black oils, volatile oils, gas condensates, wet gases, and dry gases. It also covers the entire range of producing mechanisms, including gas-cap, water-drive, and compaction-drive reservoirs.

Petroleum Production Engineering, Second Edition, updates both the new and veteran engineer on how to employ day-to-day production fundamentals to solve real-world challenges with modern technology. Enhanced to include equations and references with today's more complex systems, such as working with horizontal wells, workovers, and an entire new section of chapters dedicated to flow assurance, this go-to reference remains the most all-inclusive source for answering all upstream and midstream production issues. Completely updated with five sections covering the entire production spectrum, including well productivity, equipment and facilities, well stimulation and workover, artificial lift methods, and flow assurance, this updated edition continues to deliver the most practical applied production techniques, answers, and methods for today's production engineer and manager. In addition, updated Excel spreadsheets that cover the most critical production equations from the book are included for download. - Updated to cover today's critical production challenges, such as flow assurance, horizontal and multi-lateral wells, and workovers - Guides users from theory to practical application with the help of over 50 online Excel spreadsheets that contain basic production equations, such as gas lift potential, multilateral gas well deliverability, and production forecasting - Delivers an all-inclusive product with real-world answers for training or quick look up solutions for the entire petroleum production spectrum