In the almost sixty years since the publication of the first edition of HVAC Engineer's Handbook, it has become widely known as a highly useful and definitive reference for HVAC engineers and technicians alike, and those working on domestic hot and cold water services, gas supply and steam services. The 11th edition continues in the tradition of previous editions, being easily transportable and therefore an integral part of the HVAC engineer or technician's daily tools. Newly updated data on natural ventilation, ventilation rates, free cooling and night-time cooling, make the 11th edition of the HVAC Engineer's Handbook a vital source of information. Fred Porges has worked in both the manufacturing and process industries, and became a partner in a building services consultancy in 1962. He has held senior positions with design contractors, and his experience covers every building service and type of building from schools to housing, factories to laboratories.

Plant engineers are responsible for a wide range of industrial activities, and may work in any industry. This means that breadth of knowledge required by such professionals is so wide that previous books addressing plant engineering have either been limited to only certain subjects or cursory in their treatment of topics. The Plant Engineering Handbook offers comprehensive coverage of an enormous range of subjects which are of vital interest to the plant engineer and anyone connected with industrial operations or maintenance.This handbook is packed with indispensable information, from defining just what a Plant Engineer actually does, through selection of a suitable site for a factory and provision of basic facilities (including boilers, electrical systems, water, HVAC systems, pumping systems and floors and finishes) to issues such as lubrication, corrosion, energy conservation, maintenance and materials handling as well as environmental considerations, insurance matters and financial concerns. One of the major features of this volume is its comprehensive treatment of the maintenance management function; in addition to chapters which outline the operation of the various plant equipment there is specialist advice on how to get the most out of that equipment and its operators. This will enable the reader to reap the rewards of more efficient operations, more effective employee contributions and in turn more profitable performance from the plant and the business to which it contributes.The Editor, Keith Mobley and the team of expert contributors, have practiced at the highest levels in leading corporations across the USA, Europe and the rest of the world. Produced in association with Plant Engineering magazine, this book will be a source of information for plant engineers in any industry worldwide.* A Flagship reference work for the Plant Engineering series* Provides comprehensive coverage on an enormous range of subjects vital to plant and industrial engineer* Includes an international perspective including dual units and regulations

Part I: Introduction. Glossary of HVAC Terms. The HVAC Design Factor. Building Design and Equipment Location. Part II: Commissioning. Introduction to Commissioning. The Commissioning Process. The Commissioning Specification. Commissioning Check Lists. Commissioning Computer-Based Control Systems. Part III: Management of Maintenance and Repair. Strategic Planning. Preventive, Predictive, Proactive Maintenance. Maintenance: In-House versus Outsourcing. Computerized Maintenance. Reliability Centered Maintenance. Stores and Parts Management. Part IV: Maintenance and Repair Technology. Piping and Ductwork. Air Moving Equipment. Pumps and Valves. Heating Equipment. Cooling Equipment. Air Distribution. System Control Equipment. Condensate Control.

* A broad range of disciplines--energy conservation and air quality issues, construction and design, and the manufacture of temperature-sensitive products and materials--is covered in this comprehensive handbook * Provide essential, up-to-date HVAC data, codes, standards, and guidelines, all conveniently located in one volume * A definitive reference source on the design, selection and operation of A/C and refrigeration systems

Design, install, and maintain HVAC pumps Filled with case studies and problem-solving sections, this reference offers HVAC engineers and technicians concrete methods for achieving efficient operation in utilizing the latest digital electronic technologies. Updated to include the latest information ranging from codes to the electronic evolution in HVAC pumping systems

This comprehensive volume, often called the “HVAC bible,” has been thoroughly updated to cover the latest code changes, equipment, and techniques HVAC Equations, Data, and Rules of Thumb, 3e offers all of the information an HVAC student or professional needs in one resource. The book thoroughly explains the expansion of piping systems and temperature limitations of new materials such as polyethylene, polypropylene, PVC, CPVC, and PEX. Detailed information is included for all types of facilities, including offices, hotels, hospitals, restaurants, commercial spaces, and computer rooms. This practical handbook reflects all the latest code changes—including the ASHRAE standards—and explains how to interpret and put them to use. It includes completely updated coverage of new pumps, chillers, air handling units, cooling equipment, boilers, and pipe material. You will get complete coverage of sustainability organizations that have become more important since last edition, including LEED, USGBC, Energy Star. Features hundreds of equations and rules for everything from ductwork to air-handling systems Includes a brand-new chapter on sound, vibration, and acoustics Contains an updated list of equipment manufacturers for all products featured