The original Air Engines (also known as a heat, hot air, caloric, or Stirling engines), predated the modern internal combustion engine. This early engine design always had great potential for high efficiency/low emission power generation. However, the primary obstacle to its practical use in the past has been the lack of sufficiently heat resistant materials. This obstacle has now been eliminated due to the higher strength of modern materials and alloys. Several companies in the U.S. and abroad are successfully marketing new machines based on the Air Engine concept. Allan Organ and Theodor Finkelstein are two of the most respected researchers in the field of Air Engines. Finkelstein is considered a pioneer of Stirling cycle simulation. The historical portion of the book is based on four famous articles he published in 1959. The rest of the chapters assess the development of the air engine and put it in the modern context, as well as investigate its future potential and applications. The audience for this book includes mechanical engineers working in power related industries, as well as researchers, academics, and advanced students concerned with recent developments in power generation. Co-published by Professional Engineering Publishing, UK, and ASME Press.

Two centuries after the original invention, the Stirling engine is now a commercial reality as the core component of domestic CHP (combined heat and power) – a technology offering substantial savings in raw energy utilization relative to centralized power generation. The threat of climate change requires a net reduction in hydrocarbon consumption and in emissions of 'greenhouse' gases whilst sustaining economic growth. Development of technologies such as CHP addresses both these needs.Meeting the challenge involves addressing a range of issues: a long-standing mismatch between inherently favourable internal efficiency and wasteful external heating provision; a dearth of heat transfer and flow data appropriate to the task of first-principles design; the limited rpm capability when operating with air (and nitrogen) as working fluid. All of these matters are explored in depth in The air engine: Stirling cycle power for a sustainable future. The account includes previously unpublished insights into the personality and potential of two related regenerative prime movers - the pressure-wave and thermal-lag engines. - Contains previously unpublished insights into the pressure-wave and thermal-lag engines - Deals with a technology offering scope for saving energy and reducing harmful emissions without compromising economic growth - Identifies and discusses issues of design and their implementation

Hot air engines, often called Stirling engines, are among the most interesting and intriguing engines ever to be designed. They run on just about any fuel, from salad oil and hydrogen to solar and geothermal energy. They produce a rotary motion that can be used to power anything, from boats and buggies to fridges and fans. This book demonstrates how to design, build, and optimise Stirling engines. A broad selection of Roy’s engines is described, giving a valuable insight into the many different types and a great deal of information relating to the home manufacture of these engines is included in the workshop section.

For Stirling engines to enjoy widespread application and acceptance, not only must the fundamental operation of such engines be widely understood, but the requisite analytic tools for the stimulation, design, evaluation and optimization of Stirling engine hardware must be readily available. The purpose of this design manual is to provide an introduction to Stirling cycle heat engines, to organize and identify the available Stirling engine literature, and to identify, organize, evaluate and, in so far as possible, compare non-proprietary Stirling engine design methodologies. This report was originally prepared for the National Aeronautics and Space Administration and the U. S. Department of Energy.