An Emerging Tool for Pioneering Engineers Co-published by the International Federation of Heat Treatment and Surface Engineering.Thermal processing is a highly precise science that does not easily lend itself to improvements through modeling, as the computations required to attain an accurate prediction of the microstructure and properties of work

These volumes cover the properties, processing, and applications of metals and nonmetallic engineering materials. They are designed to provide the authoritative information and data necessary for the appropriate selection of materials to meet critical design and performance criteria.

One of two self-contained volumes belonging to the newly revised Steel Heat Treatment Handbook, Second Edition, this book examines the behavior and processes involved in modern steel heat treatment applications. Steel Heat Treatment: Metallurgy and Technologies presents the principles that form the basis of heat treatment processes while incorporating detailed descriptions of advances emerging since the 1997 publication of the first edition. Revised, updated, and expanded, this book ensures up-to-date and thorough discussions of how specific heat treatment processes and different alloy elements affect the structure and the classification and mechanisms of steel transformation, distortion of properties of steel alloys. The book includes entirely new chapters on heat-treated components, and the treatment of tool steels, stainless steels, and powder metallurgy steel components. Steel Heat Treatment: Metallurgy and Technologies provides a focused resource for everyday use by advanced students and practitioners in metallurgy, process design, heat treatment, and mechanical and materials engineering.

The second edition of the Handbook of Induction Heating reflects the number of substantial advances that have taken place over the last decade in theory, computer modeling, semi-conductor power supplies, and process technology of induction heating and induction heat treating. This edition continues to be a synthesis of information, discoveries, and technical insights that have been accumulated at Inductoheat Inc. With an emphasis on design and implementation, the newest edition of this seminal guide provides numerous case studies, ready-to-use tables, diagrams, rules-of-thumb, simplified formulas, and graphs for working professionals and students.

Vacuum Heat Treatment is a comprehensive introduction and technical resource for vacuum processes and equipment, focusing on subjects that engineers, heat treaters, quality assurance personnel and metallurgists need to know. This book also serves as a practical guide by offering numerous tips and techniques on vacuum operation, vacuum controls, vacuum component operation and vacuum maintenance/repair. Each topic is covered in sufficient depth so that the reader understands why the subject is important and how to use this information in determining equipment choices, how furnaces should be run, how process recipes are designed, and what troubleshooting steps are needed.

Steel and its Heat Treatment: Bofors Handbook describes the fundamental metallographic concepts, materials testing, hardenability, heat treatment, and dimensional changes that occur during the hardening and tempering stages of steel. The book explains the boundaries separating the grain contents of steel, which are the low-angle grain boundaries, the high-angle grain boundaries, and the twinning boundaries. Engineers can determine the hardenability of steel through the Grossman test or the Jominy End-Quench test. Special hardening and tempering methods are employed for steel that are going to be fabricated into tools. The different methods of hardening are manual hardening for a small surface (the tip of a screw); spin hardening for objects with a rotational symmetry (gears with 5 modules or less); and progressive hardening (or a combination with spin hardening) for flat surfaces. The hardening and tempering processes cause changes in size and shape of the substance. The text presents examples of dimensional changes during the hardening and tempering of tool steels such as those occurring in plain-carbon steels and low-alloy steels. The book is a source of reliable information needed by engineers, tool and small equipment designers, as well as by metallurgists, structural, and mechanical engineers.