Guidelines Establishing Test Procedures for the Analysis of Pollutants Under the Clean Water Act - National Primary Drinking Water Regulations (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) The Law Library presents the complete text of the Guidelines Establishing Test Procedures for the Analysis of Pollutants Under the Clean Water Act - National Primary Drinking Water Regulations (US Environmental Protection Agency Regulation) (EPA) (2018 Edition). Updated as of May 29, 2018 This rule modifies the testing procedures approved for analysis and sampling under the Clean Water Act and Safe Drinking Water Act. EPA proposed these changes for public comment on August 18, 2003 and April 6, 2004. The Clean Water Act changes adopted in this final rule fall into the following categories: new vendor-developed methods as well as EPA and voluntary consensus standard bodies (VCSB) methods, updated versions of currently approved methods, revisions to method modification and analytical requirements, withdrawal of certain outdated methods, and changes to sample collection, preservation, and holding time requirements. This rule also changes regulations under the Safe Drinking Water Act that establish drinking water sampling and analysis procedures. The changes include approval of vendor-developed methods, new EPA and VCSB methods, updated VCSB methods, and approval of a modification to the test kit used with Syngenta Method AG-625 that restricts its use in certain circumstances. The addition of new and updated methods to the wastewater and drinking water regulations provides increased flexibility to the regulated community and laboratories in the selection of analytical methods. This book contains: - The complete text of the Guidelines Establishing Test Procedures for the Analysis of Pollutants Under the Clean Water Act - National Primary Drinking Water Regulations (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) - A table of contents with the page number of each section

Guidelines Establishing Test Procedures for the Analysis of Pollutants - Analytical Methods for Biological Pollutants in Wastewater and Sewage Sludge (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) The Law Library presents the complete text of the Guidelines Establishing Test Procedures for the Analysis of Pollutants - Analytical Methods for Biological Pollutants in Wastewater and Sewage Sludge (US Environmental Protection Agency Regulation) (EPA) (2018 Edition). Updated as of May 29, 2018 This rule modifies the EPA's Guidelines that establish approved bacterial testing procedures for analysis and sampling under the Clean Water Act. EPA proposed these changes for public comment on August 16, 2005 and April 10, 2006. These changes include approval for new methods for monitoring microbial pollutants in wastewater and sewage sludge, including EPA methods, vendor-developed methods and methods developed by voluntary consensus bodies (VCSB) as well as updated versions of currently approved methods. The addition of new and updated methods to the wastewater regulations provides increased flexibility to the regulated community and laboratories in the selection of analytical methods. In addition, EPA has made a technical, non-substantive correction. This book contains: - The complete text of the Guidelines Establishing Test Procedures for the Analysis of Pollutants - Analytical Methods for Biological Pollutants in Wastewater and Sewage Sludge (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) - A table of contents with the page number of each section