Known as the Blue Book this fourth edition continues with the endorsement from the Association of Cost Engineers. The guide is designed to be an aid for student engineers in the design activities undertaken during their course and help young engineers in industry to compile their own set of cost data. With much of the material in the third edition retained, the major changes are: new cost data; up-dated cost index information (which has been donated by industrialists); and short-cut estimating techniques up-dated.

An immense treasure trove containing hundreds of equipment symptoms, arranged so as to allow swift identification and elimination of the causes. These rules of thumb are the result of preserving and structuring the immense knowledge of experienced engineers collected and compiled by the author - an experienced engineer himself - into an invaluable book that helps younger engineers find their way from symptoms to causes. This sourcebook is unrivalled in its depth and breadth of coverage, listing five important aspects for each piece of equipment: * area of application * sizing guidelines * capital cost including difficult-to-find installation factors * principles of good practice, and * good approaches to troubleshooting. Extensive cross-referencing takes into account that some items of equipment are used for many different purposes, and covers not only the most familiar types, but special care has been taken to also include less common ones. Consistent terminology and SI units are used throughout the book, while a detailed index quickly and reliably directs readers, thus aiding engineers in their everyday work at chemical plants: from keywords to solutions in a matter of minutes.

NOTE TO THE READER: All forms and material that were previously on a CD-ROM that accompanied this book have been moved to the following web site: http://booksupport.wiley.com Tested-and-proven techniques for quick, accurate estimates Here is the first manual that guides engineers, planners, and contractors through the process of estimating the cost of building water treatment facilities. Based on more than eighty years of the two authors' collective experience, the Cost Estimating Manual for Water Treatment Facilities not only enables you to arrive at a dependable estimate, it shows you how to do it quickly with a minimum of information and supporting data. In order to ensure reliability, the authors have compiled and analyzed the results from their own construction cost estimates for more than 500 projects as well as the results from many other engineers and contractors. The manual identifies forty-three treatment processes, nine types of water treatment plants, plus five additional types of advanced water treatment plants. The authors then demonstrate how to calculate costs for each element, accounting for needed mark-ups and allowances in order to arrive at the total plant construction cost. To help you make your own estimates, the manual provides: Examples of cost estimates for different water treatment processes Historical data from several public agencies Sample tables for 10 mgd and 100 mgd product water flow rates for each type of treatment plant Website access with Excel spreadsheets that enable you to perform estimates using your own data Now that the Cost Estimating Manual for Water Treatment Facilities is available, you no longer have to rely on hunches and anecdotal information; you have a proven, scientific method that leads to reliable estimates.

This practical reference/text provides a thorough overview of cost estimating as applied to various manufacturing industries, with special emphasis on metal manufacturing concerns. It presents examples and study problems illustrating potential applications and the techniques involved in estimating costs.;Containing both US and metric units for easy conversion of world-wide manufacturing data, Estimating and Costing for the Metal Manufacturing Industries: outlines professional societies and publications dealing with cost estimating and cost analysis; details the four basic metalworking processes - machining, casting, forming, and joining; reveals five techniques for capital cost estimating, including the new AACE International's Recommended Practice 16R-90 and the new knowledge and experience method; discusses the effect of scrap rates and operation costs upon unit costs; offers four formula methods for conceptual cost estimating and examines material-design-cost relationships; describes cost indexes, cost capacity factors, multiple-improvement curves, and facility cost estimation techniques; offers a generalized metal cutting economics model for comparison with traditional economic models; and more.;Estimating and Costing for the Metal Manufacturing Industries serves as an on-the-job, single-source reference for cost, manufacturing, and industrial engineers and as a text for upper-level undergraduate, graduate, and postgraduate students in cost estimating, engineering economics, and production operations courses.;A Solutions manual to the end-of-chapter problems is available free of charge to instructors only. Requests for the manual must be made on official school stationery.

The definitive guide to measurement and estimating using NRM1, written by the author of NRM1 The 'RICS New rules of measurement: Order of cost estimating and cost planning of capital building works' (referred to as NRM1) is the cornerstone of good cost management of capital building works projects - enabling more effective and accurate cost advice to be given to clients and other project team members, while facilitating better cost control. The NRM1 Cost Management Handbook is the essential guide to how to successfully interpret and apply these rules, including explanations of how to: quantify building works and prepare order of cost estimates and cost plans use the rules as a toolkit for risk management and procurement analyse actual costs for the purpose of collecting benchmark data and preparing cost analyses capture historical cost data for future order of cost estimates and elemental cost plans employ the rules to aid communication manage the complete 'cost management cycle' use the elemental breakdown and cost structures, together with the coding system developed for NRM1, to effectively integrate cost management with Building Information Modelling (BIM). In the NRM1 Cost Management Handbook, David Benge explains in clear terms how NRM1 is meant to be used in familiar quantity surveying tasks, as well as a range of activities of crucial importance for professionals in years to come. Worked examples, flow charts, diagrams, templates and check lists ensure readers of all levels will become confident and competent in the use of NRM1. This book is essential reading for anyone working with NRM1, and is the most authoritative guide to practice available for those preparing to join the industry.

Cost of Capital in Litigation addresses cost of capital issues in litigation and discusses major decisions, highlighting how to avoid errors that have often been made by experts. The book helps the attorney and valuation expert understand the decisions within the context of the theory of cost of capital and includes a chapter on cross-examining experts on cost of capital issues. Throughout, there are citation to relevant material and cross-reference to Cost of Capital: Applications and Examples, Fourth Edition.