Green Energy Materials Handbook gives a systematic review of the development of reliable, low-cost, and high-performance green energy materials, covering mainstream computational and experimental studies as well as comprehensive literature on green energy materials, computational methods, experimental fabrication and characterization techniques, and recent progress in the field. This work presents complete experimental measurements and computational results as well as potential applications. Among green technologies, electrochemical and energy storage technologies are considered as the most practicable, environmentally friendly, and workable to make full use of renewable energy sources. This text includes 11 chapters on the field, devoted to 4 important topical areas: computational material design, energy conversion, ion transport, and electrode materials. This handbook is aimed at engineers, researchers, and those who work in the fields of materials science, chemistry, and physics. The systematic studies proposed in this book can greatly promote the basic and applied sciences.

"Eco- and Renewable Energy Materials” provides a survey of the current topics and the major developmental trends in the rapidly growing research area of clean energy materials. This book covers, but is not limited to, photochemical materials (fuels from light), fuel cells (electricity from fuels), batteries (electricity storage), and hydrogen production and storage. This book is intended as a vehicle for the dissemination of research results on energy-based material science in the form of commissioned reviews and commentaries. This book is for scientists and engineers interested in energy-related materials, compounds and electronic devices. Prof. Yong Zhou is currently serving as a full professor at the Eco-Materials and Renewable Energy Research Center (ERERC), Nanjing University, China.

Handbook of Emerging Materials for Sustainable Energy provides a comprehensive accounting on the fundamentals, current developments, challenges and future prospects of emerging materials for the development of sustainable energy. Each chapter addresses a distinct and important area within the energy field and includes comprehensive data to support the materials being presented. Sections cover Batteries, Capacitors and Supercapacitors, Fuel cells, Thermoelectrics, Novel illumination sources and techniques, Photovoltaics & Solar cells, Alternative energy sources, hydrogen as an energy source, including hydrogen production and fuel generation, the use of Biofuels and Carbon dioxide. The book concludes with three chapters related to advanced materials under development for energy conservation and environmental protection, including theories, methodologies and simulations established for advanced materials. Covers a broad scope of advanced materials that have been developed for energy and environmental sustainability Provides detailed and updated information about the structural and functional features of various emerging materials and their multifaceted applications Includes supplementary data alongside each chapter

Effects of environmental, economic, social, political and technical factors have led to the rapid deployment of various sources of renewable energy-based power generation. The incorporation of these generation technologies have led to the development of a broad array of new methods and tools to integrate this new form of generation into the power system network. This book, arranged into six sections, highlights various renewable energy based generation technologies, and consists a series of papers written by experts in their respective fields of specialization.The Handbook of Renewable Energy Technology will be of great practical benefit to professionals, scientists and researchers in the relevant industries, and will be of interest to those of the general public wanting to know more about renewable energy technologies.

The Handbook of Clean Energy Systems brings together an international team of experts to present a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems. Consolidating information which is currently scattered across a wide variety of literature sources, the handbook covers a broad range of topics in this interdisciplinary research field including both fossil and renewable energy systems. The development of intelligent energy systems for efficient energy processes and mitigation technologies for the reduction of environmental pollutants is explored in depth, and environmental, social and economic impacts are also addressed. Topics covered include: Volume 1 - Renewable Energy: Biomass resources and biofuel production; Bioenergy Utilization; Solar Energy; Wind Energy; Geothermal Energy; Tidal Energy. Volume 2 - Clean Energy Conversion Technologies: Steam/Vapor Power Generation; Gas Turbines Power Generation; Reciprocating Engines; Fuel Cells; Cogeneration and Polygeneration. Volume 3 - Mitigation Technologies: Carbon Capture; Negative Emissions System; Carbon Transportation; Carbon Storage; Emission Mitigation Technologies; Efficiency Improvements and Waste Management; Waste to Energy. Volume 4 - Intelligent Energy Systems: Future Electricity Markets; Diagnostic and Control of Energy Systems; New Electric Transmission Systems; Smart Grid and Modern Electrical Systems; Energy Efficiency of Municipal Energy Systems; Energy Efficiency of Industrial Energy Systems; Consumer Behaviors; Load Control and Management; Electric Car and Hybrid Car; Energy Efficiency Improvement. Volume 5 - Energy Storage: Thermal Energy Storage; Chemical Storage; Mechanical Storage; Electrochemical Storage; Integrated Storage Systems. Volume 6 - Sustainability of Energy Systems: Sustainability Indicators, Evaluation Criteria, and Reporting; Regulation and Policy; Finance and Investment; Emission Trading; Modeling and Analysis of Energy Systems; Energy vs. Development; Low Carbon Economy; Energy Efficiencies and Emission Reduction. Key features: Comprising over 3,500 pages in 6 volumes, HCES presents a comprehensive overview of the latest research, developments and practical applications throughout all areas of clean energy systems, consolidating a wealth of information which is currently scattered across a wide variety of literature sources. In addition to renewable energy systems, HCES also covers processes for the efficient and clean conversion of traditional fuels such as coal, oil and gas, energy storage systems, mitigation technologies for the reduction of environmental pollutants, and the development of intelligent energy systems. Environmental, social and economic impacts of energy systems are also addressed in depth. Published in full colour throughout. Fully indexed with cross referencing within and between all six volumes. Edited by leading researchers from academia and industry who are internationally renowned and active in their respective fields. Published in print and online. The online version is a single publication (i.e. no updates), available for one-time purchase or through annual subscription.

Includes details of the fundamental phenomenological theories of solar cells, Li ion/ Li-air/Li-S batteries, fuel cells and their energy storage mechanisms. Discusses properties of various energy materials in addition to their device operation and evaluation. Includes details of the fundamental phenomenological theories of solar cells, Li ion/ Li-air/Li-S batteries, fuel cells and their energy storage mechanisms Discusses properties of various energy materials in addition to their device operation and evaluation

This comprehensive book presents a detailed account of research and recent developments in the field of green energetic materials, including pyrotechnics, explosives and propellants. This area is attracting increasing interest in the community as it undergoes a transition from using traditional processes, to more environmentally-friendly procedures. The book covers the entire line of research from the initial theoretical modelling and design of new materials, to the development of sustainable manufacturing processes. It also addresses materials that have already reached the production line, as well as considering future developments in this evolving field.