This volume covers all the large wheeled outside frame classes of 4-4-0 tender Locomotives, that once ran on the Great Western Railway.The book has full details on each of the classes with good quality pictures, diagrams names, and number lists.This work is also very useful to model makers, giving full details of mechanical and livery changes that took place from the 1900s through to the early 1930, when all except the preserved 3440, City of Truro, were withdrawn and scrapped.

The Great Western Railway experienced the trauma and disruption of the end of the broad gauge in 1892 and were faced with equipping the network with suitable motive power, especially in Devon and Cornwall where the last track conversion had taken place. West of Newton Abbot, the GWR had relied on a variety of 4-4-0, 2-4-0, 0-4-2 and 0-4-4 side and saddle tanks, often doubled-headed, and Dean set about designing a sturdy outside-framed powerful 4-4-0 with 5ft 8in coupled wheels, the 'Dukes', to tackle increasing loads over the heavily graded main line. Then, Churchward came to assist the ailing Locomotive Superintendent, using his knowledge and experience of American and continental practice to develop the Dean designs. He improved the efficiency and performance of the boilers, using the Belgian Belpaire firebox, then developed the tapered 'cone' boiler, and applied it to the chassis of the 'Duke's to form the 'Camel' class, later known as the 'Bulldogs', which eventually numbered 156 locomotives. Finally, in the 1930s when engines of the 'Duke' route availability were still required but their frames were life-expired, their boilers were matched with the stronger frames of the 'Bulldogs' to form the 'Dukedog' class, which lasted until the 1950s, particularly on the former Cambrian lines in mid-Wales. This book recounts the design, construction and operation of these small-wheeled outside-framed locomotives with many rare photos of their operation in the first decade of the twentieth century as well as in more recent times.

David Maidment has unravelled the complex history of the Johnson, Deeley and Fowler 4-4-0 locomotives of the Midland Railway and its LMS successor, covering their design, construction, operation and performance in this book with over 400 black and white photographs. It recounts their working on the Midland main lines from St Pancras to Derby, Manchester, Leeds and Carlisle, the latter via the celebrated Settle & Carlisle line, and the later work of the Fowler LMS engines on the West Coast main line. The book also describes the history of the Midland 4-4-0s built for the Somerset & Dorset and Midland & Great Northern Railways. The book covers the period from the first Midland 4-4-0 built in 1876 to the last LMS 2P withdrawn in 1962 and includes performance logs, weight diagrams and dimensions and statistical details of each locomotive.

The renowned British railroad historian delivers “a well-illustrated account of the rationale behind Collett’s construction of this 80 strong class” (West Somerset Railway Association). English railway engineer George Jackson Churchward proposed a 5ft 8in wheeled 4-6-0 for mixed traffic duties in 1901 and it was seriously considered in 1905, but it took until 1936 before his successor, Charles Collett, realized the plan by persuading the GWR Board to replace many of the 43XX moguls with modern standard mixed traffic engines that bore a remarkable likeness to the Churchward proposal. David Maidment has written another in his series of “Locomotive Portfolios” for Pen & Sword to coincide with the construction of a new “Grange” at Llangollen from GW standard parts to fill the gap left by the total withdrawal and scrapping of one of that railway’s most popular classes—to their crews at the very least. As well as covering the type’s design and construction, the author deals comprehensively with the allocation and operation of the eighty locomotives and in particular has researched their performance and illustrated it with many examples of recorded logs from the 1930s as well as in more recent times. As in previous volumes, the author has added his own personal experiences with the engines and has sourced more than 250 photos, over 40 of which are in color. “Superbly researched . . . another extraordinary and unreservedly recommended addition to . . . British Railroading History collections.” —Midwest Book Review “Granges worked off-region quite widely, so this is not just a book for the copper-capped chimney brigade; enthusiasts for whom these capable machines are favorites will definitely want this volume on the bookshelf.” —Railway Modeller

The first thought, when contemplating a new study of the Great Western Railway locomotive fleet, must surely be to ask what can there be left to say? But there is no single source which gives a general introduction to the Great Western locomotive fleet. There are monographs on individual classes, an excellent multi-volume detail study from the RCTS, and superb collections of photographs, but nothing that brings it all together. This work is intended to provide that general introduction.The volume begins with a series of short essays covering general trends in design development, whilst the main body of the volume covers individual classes. For each class there is a small table containing some principal dimensions and paragraphs of text, covering an introduction, renumbering, key changes in the development of the class and information on withdrawal.The volume concludes with appendices covering the development and types of standard boilers, the various numbering schemes used by the GWR, the arcane subject of locomotive diagrams and lot numbers, and a short reference on the many lines the GWR engulfed.The majority of illustrations are new profile drawings to a consistent format. Described as sketches, they are drawn to a consistent scale, but do not claim to be scale drawings. Much minor equipment has been omitted and the author has certainly not dared to include rivets! Although most are based around GWR weight diagrams, they are not simple traces of the original drawings. Detail has been added from other sources, components copied from different drawings and details have been checked against historical and modern photographs. One must also bear in mind that steam locomotives were not mass produced. Minor fittings frequently varied in position and changes were made over the locomotives' lifetimes. Nevertheless, this collection of drawings provides a uniquely consistent view of the GWR locomotive fleet.

This first volume on the LNER 4-4-0 locomotives describes the design, construction, history, operation and performance of the Great Northern, Great Central and Great Eastern examples, classified by the LNER at the Grouping as classes, D1 - D4, D5 - D12 and D13 - D16 respectively. It covers from their emergence in the late nineteenth century to their demise in the mid or late 1950s and their performance at their peak operation times, mainly in the inter-war years of LNER ownership. It also includes the former Midland & Great Northern Railway engines that were later absorbed by the LNER as classes D52 - D54.

This book is a comprehensive history of all the 0-6-0 tender locomotives built by the Great Western Railway or by railways absorbed by the GWR from the very earliest broad gauge engines designed by Daniel Gooch to the Collett 2251 class of the 1930s some of which were still under construction at nationalisation. It includes the Joseph Armstrong ‘Standard Goods’ and the famous Dean Goods, many of which served overseas in the two world wars. The text of 40,000 words describes the design, construction and operation of eight GW and five ‘Absorbed’ broad gauge classes, and thirteen GW and thirteen ‘Absorbed’ standard gauge classes. The book has over 250 black and white and 30 color photos, weight diagrams and drawings.