This thesis presents five studies of a gas shale reservoir using diverse methodologies to investigate geomechanical and transport properties that are important across the full reservoir lifecycle. Using the Barnett shale as a case study, we investigated adsorption, permeability, geomechanics, microseismicity, and stress evolution in two different study areas. The main goals of this thesis can be divided into two parts: first, to investigate how flow properties evolve with changes in stress and gas species, and second, to understand how the interactions between stress, fractures, and microseismicity control the creation of a permeable reservoir volume during hydraulic fracturing. In Chapter 2, we present results from adsorption and permeability experiments conducted on Barnett shale rock samples. We found Langmuir-type adsorption of CH4 and N2 at magnitudes consistent with previous studies of the Barnett shale. Three of our samples demonstrated BET-type adsorption of CO2, in contrast to all previous studies on CO2 adsorption in gas shales, which found Langmuir-adsorption. At low pressures (600 psi), we found preferential adsorption of CO2 over CH4 ranging from 3.6x to 5.5x. While our measurements were conducted at low pressures (up to 1500 psi), when our model fits are extrapolated to reservoir pressures they reach similar adsorption magnitudes as have been found in previous studies. At these high reservoir pressures, the very large preferential adsorption of CO2 over CH4 (up to 5-10x) suggests a significant potential for CO2 storage in gas shales like the Barnett if practical problems of injectivity and matrix transport can be overcome. We successfully measured permeability versus effective stress on two intact Barnett shale samples. We measured permeability effective stress coefficients less than 1 on both samples, invalidating our hypothesis that there might be throughgoing flow paths within the soft, porous organic kerogen that would lead the permeability effective stress coefficient to be greater than 1. The results suggest that microcracks are likely the dominant flow paths at these scales. In Chapter 3, we present integrated geological, geophysical, and geomechanical data in order to characterize the rock properties in our Barnett shale study area and to model the stress state in the reservoir before hydraulic fracturing occurred. Five parallel, horizontal wells were drilled in the study area and then fractured using three different techniques. We used the well logs from a vertical pilot well and a horizontal well to constrain the stress state in the reservoir. While there was some variation along the length of the well, we were able to determine a best fit stress state of Pp = 0.48 psi/ft, Sv = 1.1 psi/ft, SHmax = 0.73 psi/ft, and Shmin = 0.68 psi/ft. Applying this stress state to the mapped natural fractures indicates that there is significant potential for induced shear slip on natural fracture planes in this region of the Barnett, particularly close to the main hydraulic fracture where the pore pressure increase during hydraulic fracturing is likely to be very high. In Chapter 4, we present new techniques to quantify the robustness of hydraulic fracturing in gas shale reservoirs. The case study we analyzed involves five parallel horizontal wells in the Barnett shale with 51 frac stages. To investigate the numbers, sizes, and types of microearthquakes initiated during each frac stage, we created Gutenberg-Richter-type magnitude distribution plots to see if the size of events follows the characteristic scaling relationship found in natural earthquakes. We found that slickwater fracturing does generate a log-linear distribution of microearthquakes, but that it creates proportionally more small events than natural earthquake sources. Finding considerable variability in the generation of microearthquakes, we used the magnitude analysis as a proxy for the "robustness" of the stimulation of a given stage. We found that the conventionally fractured well and the two alternately fractured wells ("zipperfracs") were more effective than the simultaneously fractured wells ("simulfracs") in generating microearthquakes. We also found that the later stages of fracturing a given well were more successful in generating microearthquakes than the early stages. In Chapter 5, we present estimates of stress evolution in our study reservoir through analysis of the instantaneous shut-in pressure (ISIP) at the end of each stage. The ISIP increased stage by stage for all wells, but the simulfrac wells showed the greatest increase and the zipperfrac wells the least. We modeled the stress increase in the reservoir with a simple sequence of 2-D cracks along the length of the well. When using a spacing of one crack per stage, the modeled stress increase was nearly identical to the measured stress increase in the zipperfrac wells. When using three cracks per stage, the modeled final stage stress magnitude matched the measured final stage stress magnitude from the simulfrac wells, but the rate of stress increase in the simulfrac wells was much more gradual than the model predicted. To further investigate the causes of these ISIP trends, we began numerical flow and stress analysis to more realistically model the processes in the reservoir. One of our hypotheses was that the shorter total time needed to complete all the stages of the simulfrac wells was the cause of the greater ISIP increase compared to the zipperfrac wells. The microseismic activity level measured in Chapter 4 also correlates with total length of injection, suggesting leak off into the reservoir encouraged shear failure. Numerical modeling using the coupled FEM and flow software GEOSIM was able to model some cumulative stress increase the reservoir, but the full trend was not replicated. Further work to model field observations of hydraulic fracturing will enhance our understanding of the impact that hydraulic fracturing and stress change have on fracture creation and permeability enhancement in gas shales.

In November 2015, Buenos Aires, Argentina became the location of several important events for geo-professionals, with the simultaneous holding of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), the 8th South American Congress on Rock Mechanics (SCRM) and the 6th International Symposium on Deformation Characteristics of Geomaterials, as well as the 22nd Argentinean Congress of Geotechnical Engineering (CAMSIGXXII). This synergy brought together international experts, researchers, academics, professionals and geo-engineering companies in a unique opportunity to exchange ideas and discuss current and future practices in the areas of soil mechanics and rock mechanics, and their applications in civil, energy, environmental, and mining engineering. This book presents the invited lectures of the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE) and the 8th South American Congress on Rock Mechanics (SCRM). It includes the Casagrande Lecture delivered by Luis Valenzuela and 21 Plenary, Keynote and Panelist Lectures from these two Buenos Aires conferences.

Since the beginning of the US shale gas revolution in 2005, the development of unconventional oil and gas resources has gathered tremendous pace around the world. This book provides a comprehensive overview of the key geologic, geophysical, and engineering principles that govern the development of unconventional reservoirs. The book begins with a detailed characterization of unconventional reservoir rocks: their composition and microstructure, mechanical properties, and the processes controlling fault slip and fluid flow. A discussion of geomechanical principles follows, including the state of stress, pore pressure, and the importance of fractures and faults. After reviewing the fundamentals of horizontal drilling, multi-stage hydraulic fracturing, and stimulation of slip on pre-existing faults, the key factors impacting hydrocarbon production are explored. The final chapters cover environmental impacts and how to mitigate hazards associated with induced seismicity. This text provides an essential overview for students, researchers, and industry professionals interested in unconventional reservoirs.

The emphasis in Rock Mechanics for Resources, Energy and Environment is on the application of rock mechanics to the extraction of natural resources, securing energy supplies and protecting the environment surrounding rock that is subject to engineering activities. The book will be of interest to rock mechanics researchers as well as to professionals who are involved in the various branches of rock engineering.

Shale Gas and Tight Oil Reservoir Simulation delivers the latest research and applications used to better manage and interpret simulating production from shale gas and tight oil reservoirs. Starting with basic fundamentals, the book then includes real field data that will not only generate reliable reserve estimation, but also predict the effective range of reservoir and fracture properties through multiple history matching solutions. Also included are new insights into the numerical modelling of CO2 injection for enhanced oil recovery in tight oil reservoirs. This information is critical for a better understanding of the impacts of key reservoir properties and complex fractures. - Models the well performance of shale gas and tight oil reservoirs with complex fracture geometries - Teaches how to perform sensitivity studies, history matching, production forecasts, and economic optimization for shale-gas and tight-oil reservoirs - Helps readers investigate data mining techniques, including the introduction of nonparametric smoothing models

Tight Oil Reservoirs: Characterization, Modeling, and Field Development, the latest release in the Unconventional Reservoir Engineering Series, delivers a full spectrum of reservoir engineering guidelines so that the engineer can focus on every stage of development specific to tight oil. Covering characterization, micro- and nano-scale modeling, drilling horizontally, completing hydraulic fracturing, and field development, each section includes case studies, practice exercises, and future references for even deeper understanding. Rounding out with coverage on field economics and remaining challenges, this book puts control in the engineer's hands.In this ongoing series, each release will discuss the latest resources, explain their importance in the market, show the benefits of the resource through the latest research, provide details and protocols on how to evaluate and develop the resource, and give case studies and practice questions to gain practicality. - Supports the petroleum engineer with a structured table of contents focused on one unconventional resource, making research and solutions easier to find - Covers the full spectrum of reservoir engineering including modern research, development, field application, and environmental considerations - Applies practicality with case studies, exercises, and references included in every chapter

Transport in Shale Reservoirs fills the need for a necessary, integrative approach on shale reservoirs. It delivers both the fundamental theories of transport in shale reservoirs and the most recent advancements in the recovery of shale oil and gas in one convenient reference. Shale reservoirs have distinctive features dissimilar to those of conventional reservoirs, thus an accurate evaluation on the behavior of shale gas reservoirs requires an integrated understanding on their characteristics and the transport of reservoir and fluids. - Updates on the various transport mechanisms in shale, such as molecular diffusion and phase behavior in nano-pores - Applies theory to practice through simulation in both shale oil and gas - Presents an up-to-date reference on remaining challenges, such as organic material in the shale simulation and multicomponent transport in CO2 injection processes