Modeling and simulation were introduced to the earth sciences about four decades ago. Modeling has proven its worth and now it is an accepted procedure for analyzing and solving geological problems. The papers in this collection are focused on modeling sediment deposition and sedimentary sequences and have a decidedly practical flavor. Some of the leading simulation packages, such as CORRELATOR, SEDFLUX, SEDpak, SEDSIM, STRATA, and STRATSIM are applied to problems in hydrocarbon exploration, oil production, groundwater development, coal-bed appraisal, geothermics, and environmental diagnosis. All of these subjects fall under the broad heading of sedimentary basin analysis. The fifteen papers in this volume are written by internationally recognized experts from academia and industry. The contributions represent the status of geologic modeling and simulation at the start of the 21st century, and will give the reader an insight into current research problems and their possible solutions.

Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Detailed reservoir engineering fundamentals and real-world applications along with well testing procedures This practical resource provides you with the tools and techniques you need to successfully construct petroleum reservoir models of all types and sizes. You will learn how to improve reserve estimations and make development decisions that will optimize well performance. Each chapter features detailed explanations and applications as well as examples and exercise questions that reinforce salient points. Petroleum Reservoir Simulation and Modeling: Geology, Geostatistics, and Performance Prediction describes the process of applying reservoir modeling techniques and flow analysis methods to specific geologic systems encountered in all subsurface exploration and development. Special attention is given to shale, carbonate, and subsea formations. You will get comprehensive coverage of geologic descriptions, quantitative modeling, geostatistics, well testing principles, upscaled models, and history matching. •Contains worked-out numerical examples and cases studies•Provides software simulation modules that demonstrate modeling and analysis•Written by a team of experienced engineers and academics

Published in 2002, the first edition of Geostatistical Reservoir Modeling brought the practice of petroleum geostatistics into a coherent framework, focusing on tools, techniques, examples, and guidance. It emphasized the interaction between geophysicists, geologists, and engineers, and was received well by professionals, academics, and both graduate and undergraduate students. In this revised second edition, Deutsch collaborates with co-author Michael Pyrcz to provide an expanded (in coverage and format), full color illustrated, more comprehensive treatment of the subject with a full update on the latest tools, methods, practice, and research in the field of petroleum Geostatistics. Key geostatistical concepts such as integration of geologic data and concepts, scale considerations, and uncertainty models receive greater attention, and new comprehensive sections are provided on preliminary geological modeling concepts, data inventory, conceptual model, problem formulation, large scale modeling, multiple point-based simulation and event-based modeling. Geostatistical methods are extensively illustrated through enhanced schematics, work flows and examples with discussion on method capabilities and selection. For example, this expanded second edition includes extensive discussion on the process of moving from an inventory of data and concepts through conceptual model to problem formulation to solve practical reservoir problems. A greater number of examples are included, with a set of practical geostatistical studies developed to illustrate the steps from data analysis and cleaning to post-processing, and ranking. New methods, which have developed in the field since the publication of the first edition, are discussed, such as models for integration of diverse data sources, multiple point-based simulation, event-based simulation, spatial bootstrap and methods to summarize geostatistical realizations.

This volume is a compendium of papers on the subject, as noted in the book title, of modeling and mapping. They were presented at the 25th Anniversary meeting of the International Association for Mathematical Geology (IAMG) at Praha (Prague), Czech Republic in October of 1993. The Association, founded at the International Geological Congress (IGC) in Prague in 1968, returned to its origins for its Silver Anniversary celebration. All in all 146 papers by 276 authors were offered for the 165 attendees at the 3-day meeting convened in the Hotel Krystal. It was a time for remembrance and for future prognostication. The selected papers in Geologic Modeling and Mapping comprise a broad range of powerful techniques used nowadays in the earth sciences. Modeling stands for reconstruction of geological features, such as subsurface structure, in space and time, as well as for simulation of geological processes both providing scenarios of geologic events and how these events might have occurred. Mapping stands for spatial analysis of data, a topic that always has been an extremely important part of the earth sciences. Because both modeling and mapping are used widely in conjunction, the book title should reflect the close relation of the subjects rather than a division. Here, we bring together a collection of papers that hopefully contribute to the growing amount of knowledge on these techniques.

Over the last two decades, earth modeling has become a major investigative tool for evaluating the potential of hydrocarbon reservoirs. Earth modelling must now face new challenges since petroleum exploration no longer consists in only investigating newly identified resources, but also in re-evaluating the potential of previously investigated reservoirs in the light of new prospecting data and of revised interpretations. Earth models incorporate a variety of different interpretations made on various types of data at successive steps of the modeling process. However, current modeling procedures provide no way to link a range of data and interpretations with a final earth model. For this reason, sharing and exchanging information about the model building process is at present a major difficulty. Recently, the term “Shared Earth Modeling” has been used for expressing the idea that earth models should be built in such a way that experts and end users can have access, at any time, to all the information incorporated into the model. This information does not only concern the data, but also the knowledge that geoscientists produce by interpreting these data. Accordingly, practical solutions must be studied for operating a knowledge-driven approach of Shared Earth Modeling. This is the goal of this book. This study of earth subsurface modeling is intended for several categories of readers. It concerns in the first place geologists, engineers and managers involved in the study and evaluation of subsurface reservoirs and hydrocarbon exploration. Relying on recent progress in various fields of computer sciences, the authors present innovative solutions for solving the critical issue of knowledge exchange at key steps of the modeling process. This book will also be of interest to researchers in computer science and, more generally, to engineers, researchers and students who wish to apply advanced knowledge-based techniques to complex engineering problems. Contents : Part I. Earth Models. 1. Earth models as subsurface representations. 2. Earth models for underground resource exploration and estimation. 3. Earth models used in petroleum industry: current practice and future challenges. Part II. Knowledge oriented solutions. 4. Knowledge based approach of a data intensive problem: seismic interpretation. 5. Individual surface representations and optimization. 6. Geological surface assemblage. 7. 3D Meshes for structural, stratigraphy and reservoir frameworks. 8. The data extension issue: geological constraints applied in geostatistical processes. Part III. Knowledge formalization. 9. Ontologies and their use for geological knowledge formalization. 10. Ontologies for Interpreting geochronological relationships. 11. Building ontologies for analyzing data expressed in natural language. 12. Ontology-based rock description and interpretation. Part IV. Knowledge management & applications. 13. Ontology integration and management within data intensive engineering systems. 14. Earth modeling using web services. 15. Full scale example of a knowledge-based method for building and managing an earth model. Part V. Conclusion. Appendix. Glossary.

Reservoir engineering fundamentals and applications along with well testing procedures This practical resource lays out the tools and techniques necessary to successfully construct petroleum reservoir models of all types and sizes. You will learn how to improve reserve estimations and make development decisions that will optimize well performance. Written by a pair of experts, Petroleum Reservoir Modeling and Simulation: Geology, Geostatistics, and Performance Prediction offers comprehensive coverage of quantitative modeling, geostatistics, well testing principles, upscaled models, and history matching. Throughout, special attention is paid to shale, carbonate, and subsea formations. Coverage includes: An overview of reservoir engineering Spatial correlation Spatial estimation Spatial simulation Geostatistical simulation constrained to higher-order statistics Numerical schemes for flow simulation Gridding schemes for flow simulation Upscaling of reservoir models History matching Dynamic data integration

This book is a result of a career spent developing and applying computer techniques for the geosciences. The need for a geoscience modeling reference became apparent during participation in several workshops and conferences on the subject in the last three years. For organizing these, and for the lively discussions that ensued and inevitably contributed to the contents, I thank Keith Turner, Brian Kelk, George Pflug and Johnathan Raper. The total number of colleagues who contributed in various ways over the preceding years to the concepts and techniques presented is beyond count. The book is dedicated to all of them. Compilation of the book would have been impossible without assistance from a number of colleagues who contributed directly. In particular, Ed Rychkun, Joe Ringwald, Dave Elliott, Tom Fisher and Richard Saccany reviewed parts of the text and contributed valuable comment. Mohan Srivastava reviewed and contributed to some of the geostatistical presentations. Mark Stoakes, Peter Dettlaff and Simon Wigzell assisted with computer processing of the many application examples. Anar Khanji and Randal Crombe assisted in preparation of the text and computer images. Klaus Lamers assisted with printing. The US Geological Survey, the British Columbia Ministry of Environment, Dave Elliott and others provided data for the application examples. My sincere thanks to all of them.