This book on Pipeline Integrity Management Under Geohazard Conditions (PIMG), includes 42 peer-refereed papers prepared by key industry subject matter experts. The papers compile the results of extensive research as well as assemble pipeline operators' experiences in tackling geohazard challenges for both new and vintage pipelines. In addition to the experts' papers, the editors of the book prepared an introduction to each section that includes summary review of the different papers in the section. The papers are presented in 10 sections addressing all aspects of geohazard integrity management. The fi rst section highlights the geohazard impact on pipeline integrity. The next four sections focused on the geohazard demand and its management by addressing geohazard characterization, monitoring, management and mitigation. The following four sections focused on the strain capacity by addressing strain capacity predictions, management and monitoring. The last chapter tied both strain demand and capacity through structural reliability and risk assessment protocols. The information in this book is not only intended for use by pipeline designers and operators but it is expected to also be used by regulators and standards writing organizations. It is therefore, the intention of ASME to update this book on a regular basis as new data, case studies and advancement of the state of practice become available.

This book will serve as a valuable reference to widely applicable and critically important geoenvironmental topics for pipeline engineers worldwide. The topics covered are: route selection, open cut and elevated driver crossings, horizontal directional drilling, buoyancy control and geohazard management. Authored by a team of recognized specialists in their respective fields and with practical examples from experiences around the world, this book will provide generalists with working knowledge in the topics addressed to better define design, construction and integrity management issues and to identify practical solutions.

DEFECT ASSESSMENT FOR INTEGRITY MANAGEMENT OF PIPELINES Make energy pipelines safer by improved defect assessment for integrity management Pipelines provide an effective and efficient mode for transportation of energies, including both conventional fossil fuels and renewable energies and fuels such as hydrogen, biofuels and carbon dioxide, over wide ranges and long distances, meeting economic development and civilian needs. While the integrity and safety of in-service pipelines is paramount to pipeline operators, there are many factors which can adversely affect the pipeline integrity and potentially result in pipeline failures and, sometimes, serious consequences. Defect Assessment for Integrity Management of Pipelines provides a thorough and detailed overview of various techniques that can be used to assess corrosion defects, the most common defects on pipelines, and other mechanical defects such as dents, buckles and winkles, all of which constitute essential threats to pipeline integrity. In addition to widely used standards and codes for defect assessment, readers can obtain the latest progress in development of advanced techniques for improved accuracy in defect assessment. From early-stage Level I methods to the newest Level III method integrating with the mechano-electrochemical interaction, Defect Assessment for Integrity Management of Pipelines has everything you need to improve safety of your pipelines. Defect Assessment for Integrity Management of Pipelines readers will also find: Evolution of defect assessment techniques and limitations to be overcome with improved techniques Detailed analysis of defect assessment for determination of fitness-for-service of the pipelines, and prediction of their failure pressures Both theoretical and practical aspects of the defect assessment methods applied on pipelines Defect Assessment for Integrity Management of Pipelines is ideal for pipeline professionals, researchers and graduate students to improve personal knowledge, research expertise, and technical skills.

Scour and Erosion IX contains the peer-reviewed scientific contributions presented at 9th International Conference on Scour and Erosion (ICSE 2018, Taipei, Taiwan, 5–8 November 2018), and includes recent accomplishments about scour and erosion in field observation, experimental laboratory work, theoretical development, numerical modeling and disaster management. The book covers fourteen topics: A. Internal erosion B. River, coastal, estuarine and marine scour and erosion C. Rock scour and erosion D. Sediment transport: grain scale and continuum scale E. Scour and erosion around structures F. Soil erosion, restoration mechanisms and conservation G. Hillslope conservation and debris flow H. Geotechnical issues related to scour and erosion I. Field observation and analyses J. Scour and erosion testing and experiment K. Remote sensing, instrumentation and monitoring L. Advanced numerical modelling of scour and erosion M. Natural hazards due to scour and erosion N. Management of scour/erosion and sediment.

A comprehensive and detailed reference guide on the integrity and safety of oil and gas pipelines, both onshore and offshore Covers a wide variety of topics, including design, pipe manufacture, pipeline welding, human factors, residual stresses, mechanical damage, fracture and corrosion, protection, inspection and monitoring, pipeline cleaning, direct assessment, repair, risk management, and abandonment Links modern and vintage practices to help integrity engineers better understand their system and apply up-to-date technology to older infrastructure Includes case histories with examples of solutions to complex problems related to pipeline integrity Includes chapters on stress-based and strain-based design, the latter being a novel type of design that has only recently been investigated by designer firms and regulators Provides information to help those who are responsible to establish procedures for ensuring pipeline integrity and safety

Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.