Hot-Dip Galvanizing of Steel Structures contains practical information that is useful for both researchers in hot-dip galvanizing and engineers, designers, and inspectors. The book draws from the empirical experience and research of the authors, complementing the current state of knowledge of morphological variations of the coating and causes of coating delamination. The book includes chapters devoted to qualitative tests of the coating, and to methods of making corrections. A section describing the principle of protecting steel against corrosion through zinc coating is also provided, along with an extensive chapter on the principles of good design for hot-dip galvanizing. The chapter related to the safety of hot-dip galvanized steel structures offers a new hypothesis about the mechanism of nucleation of LMAC cracks during hot-dip galvanizing, thus enriching the knowledge regarding this phenomenon. - Provides practical information on hot-dip galvanizing from a scientific-disciplinary perspective, including coverage of design principles, reliability of galvanized structures, and legal aspects - Features chapters devoted to qualitative assessments of the surface treatment and methods for correcting problems - Includes discussion of hot-dip galvanizing with regard to environmental aspects and sustainable development

The Alexander Technique is a specific form of mind/body practice that focusses on improving efficiency through learning and understanding movement and behavior. Galvanizing Performances applies the teachings of this practice to the performing arts. Through theatre, music, and dance, the contributors, all artists themselves, demonstrate how deliberate movement can improve an individual's art and benefit their general health and wellbeing. Using specific case examples and in-depth analysis over a range of performance arts, this book supports instruction of effective movement and the Alexander Technique within different artistic disciplines for students and teachers alike.

Hot-dip galvanization is a method for coating steel workpieces with a protective zinc film to enhance the corrosion resistance and to improve the mechanical material properties. Hot-dip galvanized steel is the material of choice underlying many modern buildings and constructions, such as train stations, bridges and metal domes. Based on the successful German version, this edition has been adapted to include international standards, regulations and best practices. The book systematically covers all steps in hot-dip galvanization: surface pre-treatment, process and systems technology, environmental issues, and quality management. As a result, the reader finds the fundamentals as well as the most important aspects of process technology and technical equipment, alongside contributions on workpiece requirements for optimal galvanization results and methods for applying additional protective coatings to the galvanized pieces. With over 200 illustrated examples, step-by-step instructions, presentations and reference tables, this is essential reading for apprentices and professionals alike.

A cornerstone reference in the field, this work analyzes available information on the corrosion resistance of zinc and its alloys both as solid materials and as coatings on steel, detailing the corrosion resistance of zinc in atmospheric, aqueous, underground and chemical environments. Corrosion Resistance of Zinc and Zinc Alloys illustrates the nu

Reinforced concrete is one of the most widely used modern materials of construction. It is comparatively cheap, readily available, and suitable for a variety of building and construction applications. Galvanized Steel Reinforcement in Concrete provides a detailed resource covering all aspects of this important material. Both servicability and durability aspects are well covered, with all the information needed maximise the life of buildings constructed from it. Containing an up-to-date and comprehensive collection of technical information and data from world renound authors, it will be a valuable source of reference for academics, researchers, students and professionals alike. - Provides information vital to prolong the life of buildings constructed from this versatile material - Brings together a disparate body of knowledge from many parts of the world into a concise and authoritative text - Containing an up-to-date and comprehensive collection of technical information

Humankind's use of zinc stretches back to antiquity, and it was a component in some of the earliest known alloy systems. Even though metallic zinc was not "discovered" in Europe until 1746 (by Marggral), zinc ores were used for making brass in biblical times, and an 87% zinc alloy was found in prehistoric ruins in Transylvania. Also, zinc (the metal) was produced in quantity in India as far back as the thirteenth century, well before it was recognized as being a separate element. The uses of zinc are manifold, ranging from galvanizing to die castings to electronics. It is a preferred anode material in high-energy-density batteries (e.g., Ni/Zn, Ag/Zn, ZnJair), so that its electrochemistry, particularly in alkaline media, has been extensively explored. In the passive state, zinc is photoelectrochemically active, with the passive film displaying n-type characteristics. For the same reason that zinc is considered to be an excellent battery anode, it has found extensive use as a sacrificial anode for the protection of ships and pipelines from corrosion. Indeed, aside from zinc's well-known attributes as an alloying element, its widespread use is principally due to its electrochemical properties, which include a well-placed position in the galvanic series for protecting iron and steel in natural aqueous environments and its reversible dissolution behavior in alkaline solutions.

Thinkers50 Top 10 Best New Management Books for 2022 A distinguished Harvard Business School professor offers a compelling reassessment and defense of purpose as a management ethos, documenting the vast performance gains and social benefits that become possible when firms manage to get purpose right. Few business topics have aroused more skepticism in recent years than the notion of corporate purpose, and for good reason. Too many companies deploy purpose, or a reason for being, as a promotional vehicle to make themselves feel virtuous and to look good to the outside world. Some have only foggy ideas about what purpose is and conflate it with strategy and other concepts like “mission,” “vision,” and “values.” Even well-intentioned leaders don’t understand purpose’s full potential and engage half-heartedly and superficially with it. Outsiders spot this and become cynical about companies and the broader capitalist endeavor. Having conducted extensive field research, Ranjay Gulati reveals the fatal mistakes leaders unwittingly make when attempting to implement a reason for being. Moreover, he shows how companies can embed purpose much more deeply than they currently do, delivering impressive performance benefits that reward customers, suppliers, employees, shareholders, and communities alike. To get purpose right, leaders must fundamentally change not only how they execute it but also how they conceive of and relate to it. They must practice what Gulati calls deep purpose, furthering each organization’s reason for being more intensely, thoughtfully, and comprehensively than ever before. In this authoritative, accessible, and inspiring guide, Gulati takes readers inside some of the world’s most purposeful companies to understand the secrets to their successes. He explores how leaders can pursue purpose more deeply by navigating the inevitable tradeoffs more deliberately and effectively to balance between short- and long-term value; building purpose more systematically into every key organizational function to mobilize stakeholders and enhance performance; updating organizations to foster more autonomy and collaboration, which in turn allow individual employees to work more purposefully; using powerful storytelling to communicate a reason for being, arousing emotions and building a community of inspired and committed stakeholders; and building cultures that don’t merely support purpose, but also allow employees to link the corporate purpose to their own personal reasons for being. As Gulati argues, a deeper engagement with purpose holds the key not merely to the well-being of individual companies but also to humanity’s future. With capitalism under siege and relatively low levels of trust in business, purpose can serve as a radically new operating system for the enterprise, enhancing performance while also delivering meaningful benefits to society. It’s the kind of inspired thinking that businesses—and the rest of us—urgently need.