The intrinsic properties of a solid, i. e. , the properties that result from its specific structure, can be largely modified by crystallographic and chem ical defects. The formation of these defects is governed by the heat and mass transfer conditions which prevail on and near a crystal-nutrient in terface during crystallization. Hence, both the growth of highly perfect crystals and the preparation of samples having predetermined defect-induced (extrinsic) properties require a thorough understanding of the reaction and transport mechanisms that govern crystallization from vapors, solutions and melts. Crystal growth, as a science, is therefore mostly concerned with the chemistry and physics of heat and mass transport in these fluid-solid phase transitions. Solid-solid transitions are, at this time, not widely employed for high quality single-crystal production. Transport concepts are largely built upon equilibrium considerations, i. e. , on thermodynamic and phase equilibrium concepts. Hence to supply a "workable" foundation for the succeeding discussions, this text begins in Chapter 2 with a concise treatment of thermodynamics which emphasizes applications to mate rials preparation. After working through this chapter, the reader should feel at ease with often (particularly among physicists) unfamiliar entities such as chemical potentials, fugacities, activities. etc. Special sections on ther mochemical calculations (and their pitfalls) and compilations of thermochemi cal data conclude the second chapter. Crystal growth can be called. in a wide sense, the science and technology of controlling phase transitions that lead to (single crystalline) solids.

Since the 4th 1998 edition, there have been numerous crucial advances to the modelling and the basic understanding of solidification phenomena, and with its linking to experimental results. These topics have been incorporated into this 5th Fully Revised Edition, as well as a new final chapter on microstructure selection which explains how to combine the concepts of the preceding chapters for modelling real microstructures, in complex processes such as additive manufacturing. This new 5th edition is of high interest to undergraduate and graduate levels and professionals. With its numerous new topics - also borne out by the new authorship - students and teachers, scientists and engineers will greatly benefit from this new book. The topics are presented in the same praised manner as in previous editions, readable at three levels: - an initial feel for the subject is obtained by consulting the figures and their detailed captions; - a deeper understanding of the underlying physics is found by working through the main text; - 15 appendices offer a detailed analysis of the various theories, by providing detailed derivations of the relevant equations. Particularly Novel: the final chapter 8 on microstructure-selection explains how to combine the concepts of the preceding chapters to model the real microstructures formed during complex processes such as additive manufacturing, and the new detailed phase-field appendix which opens the door to the accurate computer-modelling of growth-forms. This edition goes with a companion Solutions Manual offering model solutions to 133 problems (exercises).

The book contains 5 chapters with 19 contributions form internationally well acknowledged experts in various fields of crystal growth. The topics are ranging from fundamentals (thermodynamic of epitaxy growth, kinetics, morphology, modeling) to new crystal materials (carbon nanocrystals and nanotubes, biological crystals), to technology (Silicon Czochralski growth, oxide growth, III-IV epitaxy) and characterization (point defects, X-ray imaging, in-situ STM). It covers the treatment of bulk growth as well as epitaxy by anorganic and organic materials.

Solidification and Crystallization Processing in Metals and Alloys Hasse Fredriksson KTH, Royal Institute of Technology, Stockholm, Sweden Ulla Åkerlind University of Stockholm, Sweden Solidification or crystallization occurs when atoms are transformed from the disordered liquid state to the more ordered solid state, and is fundamental to metals processing. Conceived as a companion volume to the earlier works, Materials Processing during Casting (2006) and Physics of Functional Materials (2008), this book analyzes solidification and crystallization processes in depth. Starting from the thermodynamic point of view, it gives a complete description, taking into account kinetics and mass transfer, down to the final structure. Importantly, the book shows the relationship between the theory and the experimental results. Topics covered include: Fundamentals of thermodynamics Properties of interfaces Nucleation Crystal growth - in vapours, liquids and melts Heat transport during solidification processes Solidification structures - faceted, dendritic, eutectic and peritectic Metallic glasses and amorphous alloy melts Solidification and Crystallization Processing in Metals and Alloys features many solved examples in the text, and exercises (with answers) for students. Intended for Masters and PhD students as well as researchers in Materials Science, Engineering, Chemistry and Metallurgy, it is also a valuable resource for engineers in industry.