Zircaloy is commonly used for the cladding or pressure tubes in commercial nuclear reactors because of its strength, corrosion resistance, and low absorption of thermal neutrons. Fracture toughness test techniques using small samples fabricated from archival materials from the N Reactor pressure tubes of Zircaloy-2 were developed to study the factors affecting tube fracture toughness. Compact tension specimen thickness was limited by the wall thickness (7 mm) of the tubes. Specimens (5 mm thick) were prepared for fracture toughness testing, and results were analyzed using the J-integral approach. To reduce the high cost of irradiated specimen testing and to more easily precrack specimens remotely, single-specimen potential drop techniques were employed to evaluate the fracture toughness of Zircaloy-2.

Zircaloy cladding tube specimens from commercial power reactor fuel assemblies (burnup >22 MWd/kgU) have been deformed to fracture at 325°C by either the internal gas-pressurization or the expanding-mandrel technique in a helium or argon environment containing no fission product species (e.g., I, Cs, or Cd). The fracture surfaces of ten irradiated specimens fractured by internal gas pressurization were examined by scanning electron microscopy; six specimens were found to contain various degrees of the pseudocleavage feature that is characteristic of pellet-cladding interaction failures. Out of ten test specimens fractured by expanding-mandrel loading, five were found to contain regions of pseudocleavage on the fracture surfaces. The specimens exhibited "X-marks" on the outer surface and brittle incipient cracks distributed on the inner surface, which are also characteristic of pellet-cladding interaction failures. Transmission/high-voltage electron microscope examinations of the thin-foil specimens obtained from regions adjacent to the failure sites showed that the ductile-failure specimens were characterized by a high density of dislocations which showed normal ->?-type Burgers vectors. In contrast, the brittle-type specimens were characterized by comparatively few dislocations which formed substructures. The dislocations in the brittle specimens were decorated by Zr3O precipitates 2 to 6 nm in size, and cubic-ZrO2 precipitates ? 10 nm in size were also observed in high density. These observations indicate a general immobilization of the dislocations. The low-ductility brittle-type failures appear to have been produced primarily as a result of the Zr3O and cubic-ZrO2 precipitates, augmented by precipitates of bulk hydride 35 to 100 nm in size. The bulk nature of these precipitates, which contrasts with the surficial nature of monoclinic ZrO2 and ?-hydride precipitates, was indicated from stereomicroscopy of weak-beam dark-field images. In situ irradiation of the spent-fuel cladding specimens by 1-MeV electrons at 325°C indicates that the Zr3O and cubic-ZrO2 precipitation is irradiation-induced, whereas the bulk hydride is not.

By drawing together the current theoretical and experimental understanding of the phenomena of delayed hydride cracking (DHC) in zirconium alloys, The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Components: Delayed Hydride Cracking provides a detailed explanation focusing on the properties of hydrogen and hydrides in these alloys. Whilst the emphasis lies on zirconium alloys, the combination of both the empirical and mechanistic approaches creates a solid understanding that can also be applied to other hydride forming metals. This up-to-date reference focuses on documented research surrounding DHC, including current methodologies for design and assessment of the results of periodic in-service inspections of pressure tubes in nuclear reactors. Emphasis is placed on showing how our understanding of DHC is supported by progress in general understanding of such broad fields as the study of hysteresis associated with first order phase transformations, phase relationships in coherent crystalline metallic solids, the physics of point and line defects, diffusion of substitutional and interstitial atoms in crystalline solids, and continuum fracture and solid mechanics. Furthermore, an account of current methodologies is given illustrating how such understanding of hydrogen, hydrides and DHC in zirconium alloys underpins these methodologies for assessments of real life cases in the Canadian nuclear industry. The all-encompassing approach makes The Effect of Hydrogen and Hydrides on the Integrity of Zirconium Alloy Component: Delayed Hydride Cracking an ideal reference source for students, researchers and industry professionals alike.

For a better understanding of Zircaloy fuel-rod failure by the pellet-cladding interaction (PCI) phenomenon, a mechanistic study of deformation and fracture behavior of spent power reactor fuel cladding under simulated PCI conditions was conducted. Zircaloy-2 cladding specimens, obtained from fuel assemblies of operating power reactors, were deformed to fracture at 325°C by internal gas pressurization in the absence of fission product simulants. Fracture characteristics and microstructures were examined via SEM, TEM, and HVEM. Numerous dislocation tangles and cell structures, observed in TEM specimens of cladding tubes that failed in a ductile manner, were consistent with SEM observations of a limited number of dimples characteristic of microvoid coalescence. A number of brittle-type failures were produced without the influence of fission product simulants. The brittle cracks occurred near the areas compressed by the Swagelok fittings of the internally pressurized tube and propagated from the outer to the inner surface. Since the outer surface was isolated and maintained under a flowing stream of pure helium, it is unlikely that the brittle-type failure was influenced by any fission product traces. SEM fractography of the brittle-type failure revealed a large area of transgranular pseudocleavage with limited areas of ductile fluting, which were similar in appearance to the surfaces produced by in-reactor PCI-type failures. A TEM evaluation of the cladding in the vicinity of the through-wall crack revealed numerous locations that contained an extensive amount of second-phase precipitate (Zr3O). We believe that the brittle-type failures of the irradiated spent fuel cladding in the stress rupture experiments are associated with segregation of oxygen, which leads to the formation of the order structure, an immobilization of dislocations, and minimal plastic deformation in the material.

The high-temperature diametral expansion and rupture behavior of Zircaloy-4 fuel-cladding tubes have been investigated in vacuum and steam environments under transient-heating conditions that are of interest in hypothetical loss-of-coolant accident situations in light-water reactors. The effects of internal pressure, heating rate, axial constraint, and localized temperature nonuniformities in the cladding on the maximum circumferential strain have been determined for burst temperatures between approximately 650 and 1350°C.

The fracture toughness of Zircaloy-2 cladding has been estimated by means of the recently developed pin-loading (PL) tension test. Axially notched ring specimens, cut directly from different cladding (annealed, cold-worked, hydrided, and irradiated), have been tested in a way similar to that used for compact tension specimens.