This book contains the proceedings of the Symposium on FT-IR Characterization of Polymers, which was held under the auspices of the Division of Polymer Chemistry, American Chemical Society (ACS) during the annual ACS meeting in Philadelphia, August, 1984. The content of each paper has been substantially extended from the papers presented during the conference. Due to the accidental, irrecoverable loss of the entire contents of the book by the computer system used for editorial purposes, the publication of this book has been delayed more than one year over the initial scheduled date. It has been a continuous, frustrating experience for the editor as well as for the authors. An extended Murphy's law, -anything can go wrong goes multiply wrong- has been demonstrated in editor's office. It necessitated, otherwise unnecessary, repeated proof reading during which time the editor had valuable experience ~n familiarizing himself with each paper much more than usual. The papers in this book are state-of-the-art even after such a delay. It is the authors pride and integrity toward the quality of each paper that makes the value of this book long lasting, while responsibility of the loss of any timeliness rests at the editor's hand. For the purpose of official records, submission and acceptance dates must be stated. All papers had been submitted by September, 1984, and had been accepted for publication by November, 1984, after the critical review processes.

Filling the gap for a reference dedicated to the characterization of polymer blends and their micro and nano morphologies, this book provides comprehensive, systematic coverage in a one-stop, two-volume resource for all those working in the field. Leading researchers from industry and academia, as well as from government and private research institutions around the world summarize recent technical advances in chapters devoted to their individual contributions. In so doing, they examine a wide range of modern characterization techniques, from microscopy and spectroscopy to diffraction, thermal analysis, rheology, mechanical measurements and chromatography. These methods are compared with each other to assist in determining the best solution for both fundamental and applied problems, paying attention to the characterization of nanoscale miscibility and interfaces, both in blends involving copolymers and in immiscible blends. The thermodynamics, miscibility, phase separation, morphology and interfaces in polymer blends are also discussed in light of new insights involving the nanoscopic scale. Finally, the authors detail the processing-morphology-property relationships of polymer blends, as well as the influence of processing on the generation of micro and nano morphologies, and the dependence of these morphologies on the properties of blends. Hot topics such as compatibilization through nanoparticles, miscibility of new biopolymers and nanoscale investigations of interfaces in blends are also addressed. With its application-oriented approach, handpicked selection of topics and expert contributors, this is an outstanding survey for anyone involved in the field of polymer blends for advanced technologies.

An insightful exploration of cutting-edge spectroscopic techniques in polymer characterization In Spectroscopic Techniques for Polymer Characterization: Methods, Instrumentation, Applications, a team of distinguished chemists delivers a comprehensive exploration of the vast potential of spectroscopic characterization techniques in polymer research. The book offers a concise outline of the principles, advantages, instrumentation, experimental techniques, and noteworthy applications of cutting-edge spectroscopy. Covering a wide range of polymers, from nylon to complex polymeric nanocomposites, the author presents recent developments in polymer science to polymer, analytical, and material chemists, assisting them in keeping track of the progress in modern spectroscopy. Spectroscopic Techniques for Polymer Characterization contains contributions from pioneers in modern spectroscopic techniques from around the world. The included materials bridge the gap between spectroscopists, polymer scientists, and engineers in academia and industry. The book also offers: A thorough introduction to the progress in spectroscopic techniques, including polymer spectroscopy and near-infrared spectroscopy Comprehensive explorations of topical polymers studied by spectroscopy, including polymer thin films, fluoropolymers, polymer solutions, conductive polymers Practical discussions of infrared imaging, near-infrared imaging, two-dimensional correlation spectroscopy, and far-ultraviolet spectroscopy In-depth examinations of spectroscopic studies of weak hydrogen bonding in polymers Spectroscopic Techniques for Polymer Characterization: Methods, Instrumentation, Applications is a must-read reference for polymer, analytical, and physical chemists, as well as materials scientists and spectroscopists seeking a one-stop resource for polymer characterization using spectroscopic analyses.

A collection of infrared and Raman spectra of 500 natural and synthetic polymers of industrial importance is presented in this book. A large variety of compounds are included, starting with linear polyolefins and finishing with complex biopolymers and related compounds. The spectra were registered using Infrared Fourier Transform Spectrometers in the laboratory of the All-Russia Institute of Forensic Sciences. The IR and Raman spectra are presented together on the same sheet. The accompanying data include general and structure formulae, CAS register numbers, and sample preparation conditions.Features of this book:• Continues the long tradition of publishing specific and standard data of new chemical compounds.• For low-molecular weight substances, complementary IR and Raman spectra are featured on the same sample and printed on the same page. This "fingerprint" data allows the substance of the sample to be identified without doubt.• An important feature of this unique collection of data is the increase in the identification precision of unknown substances.• Peak tables are available in digital (ASCII) format, on a diskette delivered with the book. This allows the user to search for unknowns.• All the spectra in the collection are base-line corrected.This book will be of interest to scientists involved in the synthesis of new polymeric materials, polymer identification, and quality control. Libraries of scientific institutes, research centers, and universities involved in vibrational spectroscopy will also find this collection invaluable.

Vibrational spectroscopy is advantageous as an analytical tool for polymers and comprises two complementary techniques: infrared (IR) and Raman spectroscopy. This report is an absorbing overview of how these methods can be employed to provide information about complex polymeric macromolecules with respect to composition, structure, conformation and intermolecular interactions. The review is supported by several hundred abstracts selected from the Polymer Library giving useful references for further reading.

Practical Fourier Transform Infrared Spectroscopy: Industrial and Laboratory Chemical Analysis presents the Fourier Transform Infrared Spectroscopy (FT-IR) as a valuable analytic tool in solving industrial and laboratory chemical problems. The text provides chapters that deal with the various applications of FT-IR such as the characterization of organic and inorganic superconductors; the study of forensic materials such as controlled drug particles, fragments of polymers, textile fibers, and explosives; identification and quantification of impurities and measurement of epitaxial thickness in silicon; bulk and surface studies and microanalyses of industrial materials; and the identification or determination of unknown compounds. Chemists, industrial researchers, and product engineers will find the book useful.