In-house control and the documentation of it is the basis for the assurance of compliance with legislation, in the food area and in the area of food contact materials (FCM). Safe use of FCM is a complicated area, in general, and specifically the use of printing inks and the critical points in the printing process. One of the goals for this check list is to contribute to the development of more uniform control and requirements for in-house control. Printing inks used in FCM are regulated by these general requirements and some uses are addressed more specifically , and as there is no specific legislation in the area in EU yet. In-house documentation is based on the assumption, that each link in the supply chain ensures compliance. The check lists set a frame with minimum requirements to all relevant links in the supply chain from producers to food industry and trade. The check lists are guidance to industry and trade in order to ensure compliance with the requirements in the FCM.

This Rapra Review Report, Coatings and Inks for Food Contact Materials, has attempted to cover all of the coatings and inks products used in food contact scenarios. In practice, this encompasses an extremely wide range of polymer systems and formulations, and an emphasis has been placed on coatings and inks used in food packaging, as this is usually regarded as representing the most important application category with respect to the potential for migration to occur. In addition to a thorough introduction of the polymers and additives that are used to produce coatings and inks, there are also chapters covering the regulation of these materials, the migration and analytical tests that are performed on them to assess their suitability for food contact applications, the migration data that have been published, and the areas in the field that are receiving the most attention for research and development. The report is accompanied by around 400 abstracts compiled from the Polymer Library, to facilitate further reading on this subject.

Global Legislation for Food Contact Materials, Second Edition, provides the latest regulatory updates, advances and developments on the main materials used for food contact in terms of the global legislation in place to ensure their safe and effective use. Food contact materials such as packaging, storage containers and processing surfaces can pose a substantial hazard to both food manufacturer and consumer due to the migration of chemicals or other substances from the material to the food, which can cause tainting of flavours and other sensory characteristics, or even illness. Offering a comprehensive introduction to global legislation for food contact materials, this book looks in detail at the legislation for specific food contact materials and their advantages, hazards and use in industry. It covers a broad area of global legislation, including plastic, coatings, regenerated cellulose, rubber, bioplastics, active and intelligent packaging materials, and recycled plastics in contact with food. It also includes expert analysis of future trends in global food packaging regulation. Global Legislation for Food Contact Materials, Second Edition, is a key reference text for R&D managers and safety assessment/quality control managers in food and beverage packaging, equipment manufacturers and food processors, as well as legal staff in food industry and academics with a research interest in this area. - Provides essential updates on the regulatory information provided in the first edition including important updates to EU legislation, advancement of Chinese regulatory system, and updated USDA guidance documents - Features expert analysis of future trends in global food packaging regulation - Focus on specific materials such as plastic, paper and rubber materials in contact with food

Providing a truly global overview of legislation in all major countries, this practical volume contains the information vital for manufactures of food contact materials and food producers, facilitating a comparison of the requirements and making mutual requirements easier to identify. It covers not only plastics but also other food contact materials, such as paper, board, coatings, ceramics, cork, rubber, and textiles.

This book provides valuable information on a range of food packaging topics. It serves as a source for students, professionals and packaging engineers who need to know more about the characteristics, applications and consequences of different packaging materials in food-packaging interactions. This book is divided into 13 chapters and focuses on the agro-food, cosmetics and pharmaceutical sectors. The first four chapters cover traditional packaging materials: wood, paper and cardboard, glass and metal. The next two deal, respectively, with plastics and laminates. Biobased materials are then covered, followed by a presentation of active and smart packaging. Some chapters are also dedicated to providing information on caps and closures as well as auxiliary materials. Different food packaging methods are presented, followed by an investigation into the design and labelling of packaging. The book ends with a chapter presenting information on how the choice of packaging material is dependent on the characteristics of the food products to be packaged.

Documentation of compliance with the legislation is a corner stone in the control of food contact materials (FCM). In-house control is an important pre-requisite to limit contamination from FCM and shall be based on the declaration of compliance and supporting documentation at the responsible business operators in the supply chain. The goal of this project was to develop a Nordic checklist on documentation of compliance for FCM. The Nordic checklist contains several templates. The different templates provide check points on the minimum requirements for a declaration of compliance for all types of materials. The templates are meant to be used by industry and trade as guidance for drafting a declaration of compliance. Furthermore, the check lists are also meant to be tools for the public food and FCM inspection.

Food and beverages can be very aggressive chemical milieu and may interact strongly with materials that they touch. Whenever food is placed in contact with another substance, there is a risk that chemicals from the contact material may migrate into the food. These chemicals may be harmful if ingested in large quantities, or impart a taint or odour to the food, negatively affecting food quality. Food packaging is the most obvious example of a food contact material. As the demand for pre-packaged foods increases, so might the potential risk to consumers from the release of chemicals into the food product. Chemical migration and food contact materials reviews the latest controls and research in this field and how they can be used to ensure that food is safe to eat.Part one discusses the regulation and quality control of chemical migration into food. Part two reviews the latest developments in areas such as exposure estimation and analysis of food contact materials. The final part contains specific chapters on major food contact materials and packaging types, such as recycled plastics, metals, paper and board, multi-layer packaging and intelligent packaging.With its distinguished editors and international team of authors, Chemical migration and food contact materials is an essential reference for scientists and professionals in food packaging manufacture and food processing, as well as all those concerned with assessing the safety of food. - Reviews worldwide regulation of food contact materials - Includes the latest developments in the analysis of food contact materials - Looks in detail at different food contact materials