Floodplain maps serve as the basis for determining whether homes or buildings require flood insurance under the National Flood Insurance Program run by the Federal Emergency Management Agency (FEMA). Approximately $650 billion in insured assets are now covered under the program. FEMA is modernizing floodplain maps to better serve the program. However, concerns have been raised as to the adequacy of the base map information available to support floodplain map modernization. Elevation Data for Floodplain Mapping shows that there is sufficient two-dimensional base map imagery to meet FEMA's flood map modernization goals, but that the three-dimensional base elevation data that are needed to determine whether a building should have flood insurance are not adequate. This book makes recommendations for a new national digital elevation data collection program to redress the inadequacy. Policy makers; property insurance professionals; federal, local, and state governments; and others concerned with natural disaster prevention and preparedness will find this book of interest.

Federal Emergency Management Agency (FEMA) Flood Insurance Rate Maps portray the height and extent to which flooding is expected to occur, and they form the basis for setting flood insurance premiums and regulating development in the floodplain. As such, they are an important tool for individuals, businesses, communities, and government agencies to understand and deal with flood hazard and flood risk. Improving map accuracy is therefore not an academic question-better maps help everyone. Making and maintaining an accurate flood map is neither simple nor inexpensive. Even after an investment of more than $1 billion to take flood maps into the digital world, only 21 percent of the population has maps that meet or exceed national flood hazard data quality thresholds. Even when floodplains are mapped with high accuracy, land development and natural changes to the landscape or hydrologic systems create the need for continuous map maintenance and updates. Mapping the Zone examines the factors that affect flood map accuracy, assesses the benefits and costs of more accurate flood maps, and recommends ways to improve flood mapping, communication, and management of flood-related data.

Floodplain maps serve as the basis for determining whether homes or buildings require flood insurance under the National Flood Insurance Program run by the Federal Emergency Management Agency (FEMA). Approximately $650 billion in insured assets are now covered under the program. FEMA is modernizing floodplain maps to better serve the program. However, concerns have been raised as to the adequacy of the base map information available to support floodplain map modernization. Elevation Data for Floodplain Mapping shows that there is sufficient two-dimensional base map imagery to meet FEMA's flood map modernization goals, but that the three-dimensional base elevation data that are needed to determine whether a building should have flood insurance are not adequate. This book makes recommendations for a new national digital elevation data collection program to redress the inadequacy. Policy makers; property insurance professionals; federal, local, and state governments; and others concerned with natural disaster prevention and preparedness will find this book of interest.

Currently the Iowa Flood Center (IFC) of the University of Iowa is working in conjunction with the Iowa Department of Natural Resources (IDNR) to create statewide floodplain maps. The IFC has set up a four year plan to construct flood inundation maps for 85 of the 99 counties within the state of Iowa, with the final goal of creating maps acceptable by FEMA. High resolution statewide LiDAR information provides a base dataset from which floodplain maps are produced. Stream centerline data is extracted from a DEM produced by the LiDAR dataset. The centerline information is used in both this project and as a replacement for the USGS NHD streamline for the state. Stream flow estimation for a range of annual exceedance discharges are produced through a USGS recommended combination of regional regression analysis weighted by gage influence. Water surface elevations are produced for each of the annual exceedance discharges through the use of a HEC-RAS one dimensional steady flow model. Flood boundaries are the final product created by HEC-GeoRAS though a comparison of a TIN produced from the water surface elevations and the ground surface DEM. Final FEMA acceptable DFIRM's are produce by the IDNR and submitted to FEMA for adoption into the NFIP.