National Emission Standards for Hazardous Air Pollutants for Area Sources - Plating and Polishing - Direct final rule - amendments (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) The Law Library presents the complete text of the National Emission Standards for Hazardous Air Pollutants for Area Sources - Plating and Polishing - Direct final rule - amendments (US Environmental Protection Agency Regulation) (EPA) (2018 Edition). Updated as of May 29, 2018 On June 12, 2008, EPA issued national emission standards for control of hazardous air pollutants (HAP) for the plating and polishing area source category under section 112 of the Clean Air Act (CAA). In today's action, EPA is taking direct final action to amend the national emission standards for HAP (NESHAP) for the plating and polishing area source category. These final amendments clarify that the emission control requirements of the plating and polishing area source NESHAP do not apply to any bench-scale activities. Also, several technical corrections and clarifications that do not make significant changes in the rule's requirements have been made to the rule text. We are making these amendments by direct final rule, without prior proposal, because we view these revisions as noncontroversial and anticipate no adverse comments. Consistent with Executive Order 13563, "Improving Regulation and Regulatory Review," issued on January 18, 2011, this amended rule will increase flexibility and freedom of choice for the public, and make the rule more clear and intelligible which, as a result, will reduce the burden. This book contains: - The complete text of the National Emission Standards for Hazardous Air Pollutants for Area Sources - Plating and Polishing - Direct final rule - amendments (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) - A table of contents with the page number of each section

Amendments to National Emission Standards for Hazardous Air Pollutants for Area Sources - Plating and Polishing - Final Rule (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) The Law Library presents the complete text of the Amendments to National Emission Standards for Hazardous Air Pollutants for Area Sources - Plating and Polishing - Final Rule (US Environmental Protection Agency Regulation) (EPA) (2018 Edition). Updated as of May 29, 2018 On June 12, 2008, the EPA issued national emission standards for hazardous air pollutants (NESHAP) for the plating and polishing area source category under section 112 of the Clean Air Act (CAA). On June 20, 2011, the EPA proposed amendments to clarify that the emission control requirements of the plating and polishing area source NESHAP did not apply to any bench-scale activities. The amendments also made several technical corrections and clarifications that are not significant changes in the rule's requirements. In addition, on June 20, 2011, the EPA issued a direct final rule amending the area source standards for plating and polishing area sources. Since we received an adverse comment, we are withdrawing the direct final rule today simultaneously with this final rule. This book contains: - The complete text of the Amendments to National Emission Standards for Hazardous Air Pollutants for Area Sources - Plating and Polishing - Final Rule (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) - A table of contents with the page number of each section