Federal Motor Vehicle Safety Standards - Lamps, Reflective Devices, and Associated Equipment (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) The Law Library presents the complete text of the Federal Motor Vehicle Safety Standards - Lamps, Reflective Devices, and Associated Equipment (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition). Updated as of May 29, 2018 On December 4, 2007, NHTSA published a final rule that amended the Federal motor vehicle safety standard for lamps, reflective devices, and associated equipment with an effective date of September 1, 2008. In response, the agency received thirteen petitions for reconsideration. The effective date of the final rule was delayed in subsequent notices to December 1, 2012. This document corrects several technical errors in the final rule and completes the agency's response to the issues raised in the submitted petitions for reconsideration. This book contains: - The complete text of the Federal Motor Vehicle Safety Standards - Lamps, Reflective Devices, and Associated Equipment (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) - A table of contents with the page number of each section

Federal Motor Vehicle Safety Standards - Rearview Mirrors (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) The Law Library presents the complete text of the Federal Motor Vehicle Safety Standards - Rearview Mirrors (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition). Updated as of May 29, 2018 This document initiates rulemaking to amend Federal Motor Vehicle Safety Standard (FMVSS) No. 111, Rearview Mirrors, (1) to improve a driver's ability to see areas to the rear of a motor vehicle in order to mitigate fatalities and injuries associated with backover incidents. The agency and Congress are concerned that vehicles have "blind zones," (2) areas behind the vehicle in which drivers may have difficulty seeing and avoiding a person or other obstacle. Through this notice, NHTSA presents its initial research efforts and solicits additional information that will enable the agency to develop an effective proposal to mitigate backover incidents related to vehicle rear blind zones. This book contains: - The complete text of the Federal Motor Vehicle Safety Standards - Rearview Mirrors (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) - A table of contents with the page number of each section

Federal Motor Vehicle Safety Standards - Matters Incorporated by Reference (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) The Law Library presents the complete text of the Federal Motor Vehicle Safety Standards - Matters Incorporated by Reference (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition). Updated as of May 29, 2018 This final rule updates and consolidates all of the references to the many standards and practices that are incorporated by reference into the Federal motor vehicle safety standards (FMVSSs). Although this part already contains a section regarding publications incorporated by reference, the list in that section is incomplete and has not been updated regularly. Instead, in many cases, materials have been incorporated piecemeal into individual FMVSSs. This final rule moves those scattered references into the centralized list so that it contains all of the references. Additionally, this final rule removes one obsolete FMVSS, No. 208a, as well as various obsolete provisions in other FMVSSs. Those provisions are applicable to vehicles and equipment manufactured before dates that have already passed and are no longer needed in the Code of Federal Regulations (CFR). This book contains: - The complete text of the Federal Motor Vehicle Safety Standards - Matters Incorporated by Reference (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) - A table of contents with the page number of each section

Federal Motor Vehicle Safety Standards - Rear Visibility (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) The Law Library presents the complete text of the Federal Motor Vehicle Safety Standards - Rear Visibility (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition). Updated as of May 29, 2018 To reduce the risk of devastating backover crashes involving vulnerable populations (including very young children) and to satisfy the mandate of the Cameron Gulbransen Kids Transportation Safety Act of 2007, NHTSA is issuing this final rule to expand the required field of view for all passenger cars, trucks, multipurpose passenger vehicles, buses, and low-speed vehicles with a gross vehicle weight of less than 10,000 pounds. The agency anticipates that today's final rule will significantly reduce backover crashes involving children, persons with disabilities, the elderly, and other pedestrians who currently have the highest risk associated with backover crashes. Specifically, today's final rule specifies an area behind the vehicle which must be visible to the driver when the vehicle is placed into reverse and other related performance requirements. The agency anticipates that, in the near term, vehicle manufacturers will use rearview video systems and in-vehicle visual displays to meet the requirements of this final rule. This book contains: - The complete text of the Federal Motor Vehicle Safety Standards - Rear Visibility (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) - A table of contents with the page number of each section

Federal Motor Vehicle Safety Standard, Rear View Mirrors - Federal Motor Vehicle Safety Standard, Low-Speed Vehicles Phase-in Reporting Requirements (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) The Law Library presents the complete text of the Federal Motor Vehicle Safety Standard, Rear View Mirrors - Federal Motor Vehicle Safety Standard, Low-Speed Vehicles Phase-in Reporting Requirements (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition). Updated as of May 29, 2018 The Cameron Gulbransen Kids Transportation Safety Act of 2007 directs NHTSA to issue a final rule amending the agency's Federal motor vehicle safety standard on rearview mirrors to improve the ability of a driver to detect pedestrians in the area immediately behind his or her vehicle and thereby minimize the likelihood of a vehicle's striking a pedestrian while its driver is backing the vehicle. Pursuant to this mandate, NHTSA is proposing to expand the required field of view for all passenger cars, trucks, multipurpose passenger vehicles, buses, and low-speed vehicles rated at 10,000 pounds or less, gross vehicle weight. Specifically, NHTSA is proposing to specify an area immediately behind each vehicle that the driver must be able to see when the vehicle's transmission is in reverse. It appears that, in the near term, the only technology available with the ability to comply with this proposal would be a rear visibility system that includes a rear-mounted video camera and an in-vehicle visual display. Adoption of this proposal would significantly reduce fatalities and injuries caused by backover crashes involving children, persons with disabilities, the elderly, and other pedestrians. This book contains: - The complete text of the Federal Motor Vehicle Safety Standard, Rear View Mirrors - Federal Motor Vehicle Safety Standard, Low-Speed Vehicles Phase-in Reporting Requirements (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) - A table of contents with the page number of each section

Federal Motor Vehicle Safety Standards - Electronic Stability Control Systems - Controls and Displays (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) The Law Library presents the complete text of the Federal Motor Vehicle Safety Standards - Electronic Stability Control Systems - Controls and Displays (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition). Updated as of May 29, 2018 On April 6, 2007, NHTSA published a final rule establishing a new Federal motor vehicle safety standard requiring light vehicles to be equipped with electronic stability control systems. The final rule was established as part of a comprehensive plan for reducing the serious risk of rollover crashes and the risk of death and serious injury in those crashes. This document responds to several petitions for reconsideration of the final rule. After carefully considering the issues raised, the agency is granting some aspects of the petitions, and denying some aspects. This document amends the final rule accordingly. This document also fulfills the obligations of the United States with respect to initiating rulemaking in order to comply with the global technical regulation (GTR) for ESC, adopted on June 26, 2008. This book contains: - The complete text of the Federal Motor Vehicle Safety Standards - Electronic Stability Control Systems - Controls and Displays (US National Highway Traffic Safety Administration Regulation) (NHTSA) (2018 Edition) - A table of contents with the page number of each section